Transparent conductive film Electromagnetic Wave Shielding Product Catalog

Transparent conductive film Electromagnetic Wave Shielding Roll type ( with OCA ) Advanced EMC Solutions in Transparent Applications. Enabling efficient noise suppression with reduced component count and simplified integration FEATURES ● High Transparency with Outstanding EMI Shielding Effective across a broad frequency range ● Ultra-Fine Copper Mesh Patterning Achieved with our proprietary microfabrication technology ● Pre-Applied OCA ( Optical Clear Adhesive ) Ensures convenient and clean installation ● Thin, Lightweight, and Flexible Film Format Maximizes design freedom and integration flexibility...

Transparent conductive film Electromagnetic Wave Shielding ■ Proprietary Ultra-Fine Copper Mesh Technology ●Provides stable EMI shielding over a broad frequency range by • Copper lines: 2.4 µm width, 85 µm pitch on average*¹ • Delivers low sheet resistance: Max. 1.1 Ω/sq.*2 • 84 %*1 transmittance. High electromagnetic shielding performance in a wide frequency band. ●Anti-Deflection By adopting a unique wiring pattern, the deterioration of visibility due to light scattering, which is a problem with conventional copper mesh grating wiring, is reduced. *1: This is a representative value and is not...

Transparent conductive film Electromagnetic Wave Shielding ■ Performance Item Film substrate Dimensions ( 1 sheet ) External shape 558.9 mm *1 : MD ( Machine Direction ) 620.0 mm *1 : TD ( Transverse Direction ) Pattern area 477.3 mm *1 : MD ( Machine Direction ) 531.5 mm *1 : TD ( Transverse Direction ) Thickness ( Dimensions ) Wiring Details PET ( Polyethylene Terephthalate ) 103 µm ( excluding protection film ) *1 Wiring Width Average inter-wire pitch Total light transmission Sheet resistance 1.1 Ω/sq. , ( Max. 2.6 Ω/sq. ) *1*2 Temperature: –20 to +60 ℃ ( at atmospheric pressure ), without...

— Core ( 6 inch Inner Diameter, 625 mm Length ) Electromagnetic wave shield: This product ( 53 pm*1 ) Protection film ( 50 pirn*1 ) • Leader Film ( Extra Length Section ) Leader film ( inner end ) ( Dummy area is maked as X ) •Outside end: None A dummy film is connected to the product section with tape at the inner roll leader. Indentations or steps caused by the taped joint are not considered defects. When removing the tape, please take care not to peel off the protective film. Notes) 1: The OCA ( Optical Clear Adhesive ) side is the surface where the part number " EMA0600003B0 " is clearly...

REFERENCE DATA Reference data. This is not a guaranteed value. ■ Power resistance evaluation • Evaluation equipment setup The RF signal is transmitted from the signal generator, and the measurement sample is sandwiched between the transmitting and receiving antennas to prevent the diffusion of radio waves and to directly irradiate the measurement sample with irradiation power. Transparent conductive film 50X50 mirutSI mm • Evaluation conditions • Evaluation device: KEC method device • Electromagnetic wave frequency: 2.5 GHz • Irradiation time: 1 hour • Evaluation results Irradiation power of...

Transparent conductive film Electromagnetic Wave Shielding PACKAGING CONDITIONS ■ Exterior packaging Box ■ Inner Roll Packaging Panasonic Industry Co.,Ltd. Notes) 1: In order to increase the reliability in practical use, be sure to confirm the quality of the product under actual use. 2: Be careful not to scratch the product such as a blade. 3: Do not place the product directly after taking it out. PRECAUTIONS ■ Before using the product, please refer to " Precautions for Use of Electromagnetic Wave Shield " and " Orders and Precautions. " Panasonic Industry Co., Ltd. Electromechanical Control...

Precautions for Use of Electromagnetic Wave Shield USE OF THIS PRODUCT This product is a transparent conductive film for electromagnetic wave shielding purpose. PRECAUTIONS FOR HANDLING ■ Operating Environment We cannot guarantee the performance of the product if failures occur due to the following usage environments. 1) If used in an indoor environment as specified in this specification, where corrosive gas concentrations are high, or under extremely high temperature and humidity, or in water, failures may occur. There is a possibility of discoloration, color change, or other deterioration....

Store under the following environmental conditions. 1) Avoid storing in locations with high concentrations of corrosive gases such as sea breeze, CI2, H2S, NH3, SO2, NOx, etc. 2) Do not store in direct sunlight. 3) Store the product in its packaged state, wrapped in a poly sheet, without applying stress. 4) Store within a temperature range of 0 to 35 °C and humidity of 50 % RH or less. 5) To prevent winding misalignment, store the film vertically. 6) Use the film as soon as possible. If it is necessary to store the film in an environment other than the above temperature and humidity, check and...

Precautions for Use of Electromagnetic Wave Shield IDENTIFICATION METHOD FOR NG PRODUCTS Sheets found to be non-conforming during the process inspection will be marked with dots as shown in the diagram. Do not use any sheets with these dot markings. NG Dot Pattern 25 dots bottom side of product Panasonic Industry Co., Ltd. Electromechanical Control Business Division industry.panasonic.com

This content applies to " Electromagnetic Shield. " This catalog ( including information and data on the website ) describes the performance of this product alone. Among this product and its specifications, our group ( refers to our company, its parent company, and its subsidiaries and affiliates. ) may change the design, materials, construction method, packaging, manufacturing site, and other specifications relating to the technical know-how and other intellectual property rights owned by Panasonic without prior notice, for reasons such as product improvement, rising prices of raw materials,...