Group: Matsushita Electric Corporation
Catalog excerpts
Remote Laser Welding/Cutting Robot System LAPRISS Series 4 kW Direct Diode Laser Remote Laser Welding/Cutting Robot System Laser Processing Robot Integrated System Solution
Open the catalog to page 1Comes with Five Elements for Laser Welding Laser oscillator, welding processes, software, trepanning head, and laser robot Five Elements Integrated in Simple and Compact System! Simple & Compact ●One controller directly controls the system* (laser oscillator, trepanning head, robot) ●No need to combine products of multiple manufacturers ●Service and maintenance of whole system *For single robot system only Controller Laser robot with trepanning head Laser oscillator High-quality beam with high-output (4 kW) by direct diode laser The laser oscillator is jointly developed with TeraDiode and...
Open the catalog to page 2Comes with Five Elements for Laser Welding Integration into simple and compact system Feature 3 Easy-to-use software exclusively for laser welding Easy settings of weld conditions with Teach Pendant ●Easy programming (Trepanning pattern setting) ●Laser Navigation (Laser welding support) Just select welding pattern and enter its parameters. Laser Navigation Standard parameters are determined by entered conditions such as joint and plate thickness. Note: Screens are subject to change without notice. Reduces parameter setting time. Notes: ・Parameters determined by Laser Navigation are...
Open the catalog to page 3Weight Reduction, Design Freedom, Higher Rigidity, Shorter Cycle Times, Burn-Through Prevention, Low Distortion Replacing Resistance Welding 1. Reduced cycle times One side penetration welding capability High-speed head movement & wide radiation area 2. Weight reduction & more design freedom Resistance welding Flange for welding Resistance welding Long pitch Elimination of flanges Laser welding Narrow joint One side penetration welding and efficient robot movement reduce cycle times. Elimination of flanges reduces weight. Narrow access capability increases design freedom. Laser welding...
Open the catalog to page 4Simple and compactly system integrated the elements for laser cutting!Easy-to-use software exclusively for laser cutting •Easy programming Teach pendant [Easy programming] • Only selecting cutting pattern and entering parameters such as size etc. Drilling /Cutting processing can also be switched by parameters. Compact robot specialized for laser cutting •One cable contains cabling and tubing, (control cable of daughter arm + cooling water hose + assist gas hose, etc.) •Installed the gas pressure detector as standard future. •All operations can be performed through teach pendant. (laser...
Open the catalog to page 5■Laser Robot Manipulator Specifications■Robot Controller Specifications ■Laser Oscillator Specifications Model *Teach pendant and connection cables not included. *Mass maybe changed with the specifications or locations. ■Options ■Consumables Item ■Optional Chiller Unit Specifications Manufacturer
Open the catalog to page 6LAPRISS Single Robot Standard System Notes: • Air supplied to nozzle must be free from water or oil. • Maximum allowable supply air pressure is 0.58 MPa (about 250 L/min). • Set the air pressure to 0.4 MPa (180 L/min). LAPRISS Dual Robot Standard System Notes: • Air supplied to nozzle must be free from water or oil. • Maximum allowable supply air pressure is 0.58 MPa (about 250 L/min). • Set the air pressure to 0.4 MPa (180 L/min). LAPRISS Single Robot Standard System for Cutting Notes: • Air supplied to nozzle must be free from water or oil.
Open the catalog to page 7Dimensions & Working Range (Unit: mm) *Please contact our sales representative for the operating range of the point 0. 112 Point O working range Point P working range 4×M8×1.25 Point P working range Point P working range Point O working range Point P working range Long Type Standard Type Point P working range Safety precautions Long Type Point O working range 203 390 435 537 Point P working range Before attempting to use any welding product always read the manual to ensure correct use. Lasers emitted by this laser oscillator are considered Class 4 according to IEC 60825-1:2014. Take safety...
Open the catalog to page 8All Panasonic Industrial catalogs and technical brochures
-
Conductive Polymer Capacitors
146 Pages
-
Gouging power source
1 Pages
-
350VR1 series
6 Pages
-
GZ4 series
2 Pages
-
LA-1800
2 Pages
-
Aluminum Electrolytic Capacitors
87 Pages
-
Device Product Catalog 2018
17 Pages
-
Film Capacitors
100 Pages
-
Automotive Devices Catalogue
10 Pages
-
Device Product Catalog 2017
17 Pages
-
Positioners & Peripherals
6 Pages
-
TA/TB Series
5 Pages
-
TA-WG Series
6 Pages
-
TSP
1 Pages
-
200BL2
1 Pages
-
TR6
1 Pages
-
TIG STAR WX4
1 Pages
-
300BZ3
1 Pages
-
300BP4
1 Pages
-
KR2series/600KH2
6 Pages
-
600RF2/FR1 series
6 Pages
-
500CL5/180SL7
6 Pages
-
400GT3
6 Pages
-
350GZ4/GR3series
6 Pages
-
350GE2
6 Pages
-
350GB2
6 Pages
Archived catalogs
-
MIG Welding Machines
4 Pages
-
CO2/MAG Welding Machines
4 Pages