*mydirectindustry

Film Capacitors

Product catalog summary

Overview: This document is a comprehensive catalog of Panasonic's plastic film capacitors, detailing their specifications, features, and applications across various sectors including electronic equipment, automotive, industrial, and infrastructure.

Sections:

Electronic Equipment Use: Highlights capacitors like the Stacked Metallized PPS Film Chip Capacitor and Metallized Polyester Film Capacitor, known for their non-inductive properties and tight capacitance tolerance, suitable for high-density mounting and specific circuits such as LCD B/L inverter units and audio circuits.
Automotive, Industrial, and Infrastructure Use: Focuses on capacitors designed for noise suppression in automobiles, DC-Link applications, and AC motors, emphasizing high safety, self-healing, and self-protecting functions for high-reliability applications.
AC Motor Use: Describes capacitors like the AMF and DMF series, emphasizing their high safety, reliability, and suitability for motors and compressors.

Key Specifications:

Operating Temperature: Ranges from -55°C to +130°C depending on the capacitor type.
Capacitance Range: Varies from 0.00010 μF to 110 μF.
Voltage Ratings: DC ratings from 16 V to 3000 V and AC ratings up to 275 V.

Features and Applications:

Non-Inductive Design: Suitable for high-frequency applications.
Epoxy Resin Coating: Provides moisture resistance and durability.
Safety Approvals: Many capacitors are UL, CSA, and VDE approved, ensuring compliance with international safety standards.

Recommendations: Users are advised to consult the factory for current technical specifications before purchase and to contact Panasonic immediately if any safety concerns arise.

Additional Specifications:

Rated Voltage: Capacitors are available with rated voltages of 630 VDC, 1250 VDC, and 3000 VDC.
Capacitance Tolerance: ±3% for 630 VDC, ±5% for 1250 VDC and 3000 VDC.
Dissipation Factor (tan δ): Generally less than 0.1%.
Insulation Resistance (IR): Minimum values specified for different voltages, ensuring high reliability.

Procedures and Standards:

Capacitors are designed to withstand specific environmental conditions, including temperature ranges from -40°C to +105°C.
Compliance with safety standards such as UL, CSA, and European regulations is highlighted.

Key Data from Tables:

Tables provide detailed dimensions and minimum order quantities for each capacitor type, facilitating selection based on physical and electrical requirements.
Part numbers are associated with specific capacitance values and dimensions, aiding in precise identification and ordering.

Important Notes: Specifications are subject to change without notice, and users are advised to contact the manufacturer for the latest technical specifications before purchase or use. Safety concerns should be addressed immediately with the manufacturer.

Catalog excerpts

2017Products Catal°g Plastic Film Capacitor Electronic Equipment Use AC Motor Use Automotive, Industrial and Infrastructure Use

Open the catalog to page 1

Panasonic • Electronic Equipment Use

Open the catalog to page 2

Summary of Products Electronic Equipment Use Dielectric Operating Temp✽ ● Non-inductive, Stacked ● High density mounting ● Tight C-Tol. ● Reﬂow soldering Stacked Metallized Film Chip Capacitor Metallized Type Metallized Polypropylene Film Capacitor Metallized Polyester Film Capacitor Stacked Metallized Plastic Film Chip Capacitor Stacked Metallized PEN Film Chip Capacitor Stacked Metallized PPS Film Chip Capacitor Smoothing circuit 1 μF to 10 μF 150 V.AC to 220 V.AC 350 V.DC to 630 V.DC Resonance circuit 0.01 μF to 4.0 μF 300 V.AC to 2300 V.AC 500 V.DC to 1200 V.DC Interference Suppressors (Safety...

Open the catalog to page 3

Summary of ProductsAC Motor Use Dielectric * The range of IEC approval is different depending on each approval. * Operating temp. : Including temperature-rise on unit surface. * Refer to each product page for details. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be su

Open the catalog to page 4

Series system diagram Series system diagram Surface mounting type Stacked Metallized PPS Film Chip Capacitor Stacked Metallized PEN Film Chip Capacitor Stacked Metallized Plastic Film Chip Capacitor High performance General- purpose High density surface mounting High density surface mounting Small in size and large capacitance ECPU(A) Volt. : 16 V.DC Temp. : −40 ˚C to +85 ˚C Cap. : 0.10 μF to 1.0 μF High performance General- purpose Special application High density surface mounting Ringer circuit for telephone, PBX etc. Radial lead type Metallized Polyester Film Capacitor Metallized Polypropylene...

Open the catalog to page 5

Main Applications & Main Products ECQE ECWF ECQE ECWF ECQE · ECWF ECQE ECWF ECQE · ECWF ECQUL ECQUL ECQUA · ECQE(AC) ECQUG · ECQUL ECQUA · ECQE(AC) ECQUG · ECQUL Switching Power Supply ECQE ECWF ECQE · ECWF ECQUA · ECQE(AC) ECQUA · ECQE(AC) ECQE · ECWF Non-contact charger Wave generator ECHU ECWU Charge control circuit ECHU ECWH ECWF ECHU ECWH ECWF ECHU ECWU Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately....

Open the catalog to page 6

Main Applications & Main Products xDSL ECHU ECWU ECQE ECWU ECQE Phone Line ECQUA ECQUG ECQUA ECQUG Microwave oven(IH) DC/DC Converters Smart Keyless Igniter Wireless Noise Suppression of Automobile Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2017

Open the catalog to page 7

1. In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor, permissible voltage (R.M.S) in alternating current is shown in the following table. 2. Permissible voltage (R.M.S) in alternating current is not an AC rated voltage. 3. The capacitor of DC rating should not be used at the primary side of power supplies. 4. The peak value (zero-to-peak) including pulse of voltage applied capacitor of DC rating should be less than DC rated voltage. The permissible pulse current is different in each type of the capacitor, please request the product specifications. 5....

Open the catalog to page 8

Taping Specification for Automatic Insertion (Mounting) Taping type Shape Taping style Standard taping 5 mm, 7.5 mm lead spacing with 15 mm & up body width Odd size taping (II) Chip type Radial type 5 mm lead spacing with 12.7 mm body width Other than above Embossed taping Please consult 8 mm, 12 mm, 16 mm, 24 mm carrier tape Apply for chip type Radial type taping taping Note : H1 dimension is based on insertion machine “Panasert RH series” made by Panasonic. Consult with Panasonic technical staff when using other insertion machines. Note : H1 dimension is based on insertion machine “Panasert...

Open the catalog to page 9

* Style AS is 18.0 - 20.0 in code H. Note : H1 dimension is based on insertion machine "Panasert RH series" made by Panasonic. Consult with Panasonic technical staff when using other insertion machines. Ammo Packing Ammo Box depends on capacitor's dimensions, taping style and quantity. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. &nbs

Open the catalog to page 10

• Embossed taping • Standard packaging quantities • Reel dimensions • Leader part and tape end Tape end Leader part Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 201

Open the catalog to page 11

Temperature & Frequency Characteristics Temperature characteristics Typical curve Capacitance change Dissipation factor change ECWF ECWH Capacitance change Dissipation factor change Insulation resistance change ECWF ECWH Insulation resistance change ECWU ECHU Frequency Characteristics Typical curve Capacitance change Dissipation factor change 10 ECWF ECWH Dissipation factor change Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise reg

Open the catalog to page 12

* Please confirm in the individual page because the specifications depend on the partial capacitance. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016

Open the catalog to page 13

All Panasonic Industrial, Robot & Welding catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list