Group: Matsushita Electric Corporation
Catalog excerpts
Conductive Polymer CapacitorsGeneral Catalog Conductive Polymer Aluminum Electrolytic Cepacitors Conductive Polymer Tantalum Solid Capacitors poscAp Conductive Polymer Aluminum Solid Capacitors Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Open the catalog to page 1Electrolytic capacitors with conductive polymer to meet the needs of all electronic equipments in the world SP-Cap, POSCAP, OS-CON, Hybrid use high conductive polymer to achieve low Equivalent Series Resistance(ESR), excellent noise reduction capability and ideal frequency Each capacitor has long service lifetime, high reliability and high heat resistance. OS-CON™ Hybrid Features | Low ESR by using conductive polymer • Suitable as a decoupling capacitor to remove noises, because its impedance has ideal frequency characteristics. • Suitable as a smoothing capacitor for switching power supply...
Open the catalog to page 2Conductive Polymer Aluminum Electrolytic Capacitors INDEX P3 Environmental responsibility/ISO/IATF (ISO/TS) Certified P4 Notices / Items to be observed P5 Polymer Capacitor of Panasonic P7 SP-Cap/POSCAP Voltage & Capacitance P9 OS-CON/Hybrid Voltage & Capacitance PI 3 Guidelines and Precautions P16 Mountings specifications / Packing specifications PI 7 SP-Cap Line-up PI 8 Series system diagram PI 9 Products list P21 CS/CT/CX P23 SX P25 GX/GX-L P26 LX P27 SR/LR/SS/LS/ST/LT P29 CY/SY P31 HX P33 Catalog EOL models SP-Cap' Conductive Polymer Tantalum Solid Capacitors P37 Guidelines and...
Open the catalog to page 3Environmental responsibility Industrial Solutions Company, Panasonic Corporation The Automotive & Industrial Systems Company Group, Panasonic Corporation, Fulfills both environmental contribution and business growth, takes care of biodiversity, and contributes to create harmonization of environment, economy and society and to achieve a sustainable society. RoHS compliance All capacitors comply with RoHS directive (2011/65/EU)and (EU)2015/863. Restricted Substance Restricted substances of RoHS directive Cadmium(Cd) and it's compounds Lead(Pb) and it's compounds Mercury(Hg) and it's compounds...
Open the catalog to page 4Notices / Items to be observedNotices Applicable laws and regulations •This product complies with the RoHS Directive (Restriction of the use of certain Hazardous substances in electrical and electronic equipment (DIRECTIVE 2011/65/EU) and (EU) 2015/863. •No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing this product. •We do not use PBBs or PBDEs as brominated flame retardants. •Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method, on the occasion of export of this product....
Open the catalog to page 5Characteristics PortfolioFull coverage of the capacitor conductive market Capacitance vs. ESR Capacitance («,F)Basic structureSP-Cap poscAp Silver paste Silver paste / J Carbon layer / Dielectric oxidization layer Aluminum foil OSCON. Hybrid Hybrid electrolyte(Conductive polymer + Electrolyte) impregnating separator sheet[Hybrid] Electrolyte(Conductive polymer) impregnating separator sheet[OS-CON]
Open the catalog to page 6©Required performance ; =1High voltage =»High ripple current Hybrid OSCON. ©Required performance =>High voltage =>Low ESR =>High ripple current poscAp OSCON. Hybrid ©Required performance =>Low ESR =>Large capacitance (Small size/Low profile) SP-Op poscAp >1;This product is not intended for use in any driving application or any other critical functions that affect passenger safety (e.g. Powertrain, ABS, Engine ECU, Airbag, etc.) If the intended use of TA/TV series products is for use in other automotive related applications, please contact our sales team. All requests are subject to...
Open the catalog to page 7[Size] (Ripple Ar.m.s.) Size code SP-Cap lxwxh (unit: mm) POSCAP LxWxH 7.3X4.3X1.0 max.
Open the catalog to page 8Voltage (More than 1 6V.DC) & Capacitance SMD type Product Of 1 05 °C ■OS-CON ■Hybrid Series [Size] Size code OS-CON
Open the catalog to page 10Conductive Polymer Aluminum Electrolytic Capacitors SP-Cap
Open the catalog to page 12Conductive Polymer Aluminum Electrolytic Capacitors Mounting specifications / Packing specifications Selection guide Product table
Open the catalog to page 13Mounting specifications/ Packing specifications Guidelines and Precautions Mounting specifications/ Packing specifications Guidelines and Precautions A Application Guidelines poscAp Selection guide Surface mount type Catalog Deletion Models OS-CON. Guidelines and Precautions Mounting specifications/ Packing specifications Selection guide Surface mount type Radial lead type 1 .Circuit design 1 -1 Prohibited circuits for use Do not use SP-Cap with the following circuit. (1) Time constant circuits (2) Coupling circuits (3) 2 or more SP-Cap's connected serially (4) Circuits which are greatly...
Open the catalog to page 142. Mounting 2-1 When mounting (1) Check SP-Cap ratings (capacitance and voltage) before mounting. (2) Check SP-Cap polarity before mounting. (3) Check land size for SP-Cap before mounting. (4) When using a mounter, if the pressure for mounting is too high, then current leak may increase, short-circuiting may occur, or SP-Cap may break down or come off. 2-2 Soldering (1) Reflow soldering Be performed by one of following methods, (a) Ambient heat conduction reflow (IR / Hot-air) Refer to the page of “Mounting Specifications”, (b) Vapor phase reflow (but only allowable for CX, CT, SX, ST, GX,...
Open the catalog to page 15Mounting specifications/ Packing specifications Guidelines and Precautions Mounting specifications/ Packing specifications Guidelines and Precautions 4.Transportation Take sufficient care during handling because excessive vibration, or shock can cause reliability of SP-Cap to decrease. poscAp Selection guide 5.Emergency procedures If a SP-Cap is overheated, a resin case may emit smoke. If this occurs, immediately switch off the unit’s main power supply to stop operation. Keep your face and hands away from SP-Cap until temperature is low enough to cause the SP-Cap to ignite and burn. Surface...
Open the catalog to page 16Mounting specifications/ Packing specifications Recommendable reflow soldaring I Recommend able reflow soldering Soldering temperature and Soldering time poscAp Guidelines and Precautions_ Mounting specifications/ Packing specifications Selection guide Surface mount type Land pattern ■Typical land pattern: 2-Terminals BTypical land pattern: 3-Terminals For Low esl terminal (l*, gx-l Series) For standard terminal (C*,S*,GX,HXSeries) For Low ESL terminal (L*, GX-L Series) Catalog Deletion Models Guidelines and Precautions Mounting specifications/ Packing specifications Selection guide...
Open the catalog to page 17All Panasonic Industrial catalogs and technical brochures
-
Conductive Polymer Capacitors
146 Pages
-
LAPRISS series
8 Pages
-
Gouging power source
1 Pages
-
350VR1 series
6 Pages
-
GZ4 series
2 Pages
-
LA-1800
2 Pages
-
Aluminum Electrolytic Capacitors
87 Pages
-
Device Product Catalog 2018
17 Pages
-
Film Capacitors
100 Pages
-
Automotive Devices Catalogue
10 Pages
-
Device Product Catalog 2017
17 Pages
-
Positioners & Peripherals
6 Pages
-
TA/TB Series
5 Pages
-
TA-WG Series
6 Pages
-
TSP
1 Pages
-
200BL2
1 Pages
-
TR6
1 Pages
-
TIG STAR WX4
1 Pages
-
300BZ3
1 Pages
-
300BP4
1 Pages
-
KR2series/600KH2
6 Pages
-
600RF2/FR1 series
6 Pages
-
500CL5/180SL7
6 Pages
-
400GT3
6 Pages
-
350GZ4/GR3series
6 Pages
-
350GE2
6 Pages
-
350GB2
6 Pages
Archived catalogs
-
MIG Welding Machines
4 Pages
-
CO2/MAG Welding Machines
4 Pages