300BZ3
1Pages

Catalog excerpts

Full Digital DC TIG Welding Machines Full Digital control Accurate control only possible with Full Digital control Receiving good reputation that melting edges are sharp. •Condition setting can be made with unit of 1A and a high quality welding without variation. •Welding conditions suitable for a work can be reproduced correctly. ■Rated specifications Electrode: 2.4 mm Angle: 30° Base metal - electrode: 0.5mm Small sized, light weight and full-fledged •19.5 kg with 300A (usage rate 40%). Both volume and weight are •Three welding methods are selectable. • DC TIG welding (*DC pulse TIG welding is also available). • DC arc spot welding • DC manual welding Simple operation Condition setting can be done easily with a jog dial and a touch panel. Versatile functions 64 types of welding condition Connection with auxiliary equipment is easy. •Connection with Panasonic robot TA series Gil controller can be made easily. t Stainless steel (0.5 mmt), Overlap fillet welding (same material) (Pulse current: 50A, Base current: 5A, Speed: 30cm/min.) •Almost 100% instant arc start even with 4A Arc start with little burn-through became possible in butt welding of stainless steel •Good concentration of arc and stable arc with little fluctuation are realized. •Welding of a thin plate and a thick plate can be made with a thick •When the nozzle with gas lens (option) is used, appearance of bead SStln low current range, select adequate application conditions to stabilize arc. •Power supply system capacity and required cable thickness * Terminal adapter/CWC00180 included in accessory •Options (equipment required for each application) SKAlso see the page of options (pages 10 and 11) ■TIG welding torch •Air cooling type (200A), Euro connector (Water cooling type (300A), Euro connector 58 See the page of options for adapter ■Extension cable (available on request) •When you use an extension cable, purchase the terminal adapter (CWC00180) and the control cable set (TWX00018) and connect them with this product. ■Sequencer interface/ external device connecting unit ■Cooling water unit ■Tungsten electrode [Please prepare the following on your side] •Argon gas (for welding) • Input and output side cables • Ground cable

Open the catalog to page 1

300BZ3
1Pages

Catalog excerpts

All Panasonic Industrial catalogs and technical brochures

Archived catalogs

300BZ3 1Pages

Catalog excerpts

All Panasonic Industrial catalogs and technical brochures

Archived catalogs

300BZ3
1Pages