300BP4
1Pages

Catalog excerpts

Full Digital AC/DC TIG Welding Machines New wave for aluminum welding More gentle, faster, more beautiful! 30 to 400 Hz AC output control changes aluminum welding. An-arc control at will Improves aluminum welding technique. •Difficult fillet welding can be made easily. Insertion of filler wire is easy too. •Convergence of arc increases, burn through can be avoided and tack welding is made easy. •Welding modes for artisans who seek sophisticated skill are available, such as mix mode, exchange soft mode, etc. Current: Peak current 225A Easy to weld. Burn-through is apt to happen Circular, fillet Current: Peak current 260A Soft and fast arc start | r~X-. Both in AC and DC welding, start is three ° / iV> — times faster than conventional machines. Full digital high speed CPU control makes Simple and direct condition setting. Easy to understand condition setting. Reproduction of welding condition with high precision. Welding Navigation assists to find optimum welding condition. STEP Start welding ^ ^STEP Select welding STEP Optimum condition Rich database Selectable from 5 kinds of material (aluminum, stainless steel, brass, titanium and copper) Selected welding condition can be changed and stored. Expert mode enhances the proficient skills. AC/DC TIG drooping characteristic and AC/DC TIG constant current characteristic are selectable. Advanced crater iterative function. • Iterative arc-end function •Variable current iterative function DC manual mode available t*f 1 In the case of AC TIG or MIX TIG, when AC frequency is increased, the rated output current may not be available due to the voltage drop caused by the impedance (AC resistance) of the output-side cable. However, this is not the error of this product. 583 Please use high purity Argon gas for welding (degree of purity: 99.9% or more). SK4 The depth excludes the input terminal cover. •Power supply system capacity and required cable thickness * One-touch joint (Euro connector) included in Options (equipment required for each application) SSSAlso see the page of options (pages 10 and 11). ■TIG welding torch BExtension cable (available on request) •Air cooling type (200A), Euro connector and applicable torch W •Water cooling type (300A), Euro connector #When you use an extension cable, purchase the terminal adapter (CWC00180) and the control cable set (TWX00018) and connect them with this product. Terminal adapter/CWC00180l IControl cable assy/TWX00018 ■Cooling water unit ■Tungsten electrode 58 See the page of options for adapter [Please prepare the following on your side] • Argon gas (for welding) • Input and output side cables • Ground cable

Open the catalog to page 1

300BP4
1Pages

Catalog excerpts

All Panasonic Industrial catalogs and technical brochures

Archived catalogs

300BP4 1Pages

Catalog excerpts

All Panasonic Industrial catalogs and technical brochures

Archived catalogs

300BP4
1Pages