Electronics Assembly System catalog Support pin automatic exchange (option) Screen Printer * It may not conform to Machinery Directive and EMC Directive in case of optional configuration and custom-made specification. PCB dimensions (mm) *1 PCB exchange time *2 Repeatability L 50 × W 50 to L 510 × W 510 14 sec including transfer, PCB positioning and recognition, printing and regular cleaning (when PCB is L250 × W150 ) 2Cpk ±4.0 µm 6σ （±3σ） （Under conditions specified by Panasonic） 2Cp ±15.0 µm 6σ （±3σ） （Under conditions specified by Panasonic） Printing accuracy Screen frame dimensions (mm) High-Quality Printing Supporting high accuracy/density printing Enhancing automation and labor-saving functions Pneumatic source 0.5 MPa, 30 L/min (A.N.R.) (Blower motor vacuum spec), 400L/min (A.N.R.) (ejector vacuum spec) *Values such as cycle time and accuracy may vary depending on operating conditions. *Please refer to the "Specification booklet" for details. *1: The max PCB width changes when “Paper-less cleaning,” “Support pin automatic exchange” or “Attack angle variable squeegee” has been selected. For details, see specifications. *2: PCB exchange time varies depending on the machine in the pre-process and the post process, the PCB size, the use of a PCB pressing-down unit and so forth. *3: For mask specifications, please see the specification. *4: Including blower and vacuum pump"Option" *5:

Supporting high accuracy/density printing ●Attack angle variable squeegee (option) The set squeegee angle can be adjusted, using the front and rear squeegee vertical axes, between 45° and 70° . ●Top/side clamper (movable type) (option) ●New operation panel Pressing down on PCB edge faces increases printing quality of warped PCB. Either PCB upper or side face can be selected for correction. ① A large-sized panel (15-inch) introduced to increase ease of use and visibility. ② Screen configuration reviewed (a reduction in the number of screens) to decrease the screen handling time required. An increase...