Electronics Assembly System catalog Radial Lead Component Insertion Machine The RHSG has evolved. By supporting 3/4 pitches, expanding the range of board sizes and increasing component input, the high-density radial component insertion machines provide higher productivity. * It may not conform to Machinery Directive and EMC Directive in case of optional configuration and custom-made specification. 0.25 s/component to 0.6 s/component 0.25 s/component to 0.6 s/component No.of component inputs 40 Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm Applicable Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, components LED, Transistor, Filter, Resistor network PCB exchange time Insertion direction Electric source *2 Pneumatic source Dimensions Mass 80 (Connection mode), 40 + 40 (Exchange mode) Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network about 2 s to about 4 s (Room temperature 20℃) about 2 s to about 4 s (Room temperature 20℃) 4 directions (0 °, 90 °, - 90 °, 180 °) 4 directions (0 °, 90 °, - 90 °,180 °) 3-phase AC 200 V, 3.5 kVA * Values such as maximum speed may vary depending on operating conditions. * Please refer to the ‘‘Specification’’ booklet for details. *1: On condition *2: Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V *3: Excluding signal tower

Higher insertion speed and operation efficiency improve productivity Either one of 2-pitch (2.5mm/5.0mm), 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) spec. can be selected for insertion pitch. Realized high speed insertion at a rate of between 0.25 s and 0.6 s per component. even for large-size components with 3-pitch (2.5mm/5.0mm/7.5mm) or 4-pitch (2.5mm/5.0mm/7.5mm/10.0mm) spec. The use of guide pins makes high-density insertion possible when there is a gap between components. Complete self-correction function ensures high reliability Complete self-offset function covering...