Panasonic CM232
2Pages

Catalog excerpts

Panasonic I 2009 | Electronics Assembly System catalog ror me Our Solutions, Your Value High modi compatibi High compatibility with CM402 sries, CM602 , CM212 realized through modular manufacturing concept. High-speed head (12 nozzles) w * pla solj one Feeder Common nozzles Ceramic nozzles Modular High Speed Placement Machine 镕 High-speed XY drive and high-flexibility 8-nozzle heads with direct tray feeders provide high productivity by mounting from microchips to tray components. 0.045 s/chip (80 000 cph) Placement data Touch panel opration " lt may not conform to Machiner/ Directive and EMC Directive in case of optional configuration and custom-made spcification. Model ID CM232-I Model No. NM-EJM9C PCB dimensions L 50 mm x W 50 mm to L 400 mm x W 250 n ^SafetyCautions 驕High-speed head Max. speed Placement accuracy Component dimensions 12 nozzles 0.045 s/chip (TypeA-2) tPlease read the User's Manual carefully to familiarize yourself with safe and effective usage procdures. To ensure safety when using this equipment ail work should be performed according to that as stated in the supplied Operating Instructions. Read your operating instruction manual thoroghly. ±50 Mm/chip (Cpk镊1) (01005")0402 chip *e to L12 nui x W12 n High-flexibility head |8 nozzles Panasonic Group products are built with the environment in mind. http://panasonic.net/eco/ Panasonic Group builds Environmental Management System in the factories of the world and acquires the International Environmental Standard ISO 14001:2004. Max. speed 0.058 s/chip (Type A-0), 0.45 s/QFP (Type D-0, D-2, D-3) Placement accuracy 1150 |im/chip, ±35 um/QFP D24 mm to D32 min, ±50 tim/QFP < D24 mm (Cpk գ1) Component dimensions (0201") 0603 chip to L 32 mm x W 32 n Multi-functional head |3 nozzles Inquines՗ Panasonic Factory Solutions Co., Ltd. Corporate Sales Division 1375 Kamisukiawara, Showa-cho, Nakakoma-gun, Yamanashi 409-3895, Japan TEL+81-055-275-9148 FAX +81-055-275-6269 Max. speed 0.75 s/QFP (Type E-1, E-2) Placement accuracy | ± 35 um/QFP (Cpk 1) Component dimensions (0201") 0603 chip to L100 mm x w 90 mm .S PCB exchange time 4.0 s (when nothing is placed on the reverse side of PC board) Electric source *i 3-phaseAC 200 V, 2.7 kVA Pneumatic source *2 0.5 MPa, 150 L/min (A.N.R.) AN data as of August.17,2009. | Ver.August. 17,20091 Dimensions W 2150 mm x D 2175 mm «3 x H1 430 n Mass *s 2 500 kg 'Values such as maximum speed and placement accuracy may vary depending on operating conditions. *Please refer to the'Specificationbooklet for d˩tails *1 :Compatible with 220 / 380 / 400 / 420 / 480 V *2:Only for main body *3:Dimension D including direct tray feeder:2 2g0 mm *4:Excluding monitor and signal tower *5:Standard configuration:excluding batch exchange cart and tray feeders. This may differ depending on configuration. *6:The 0402 chip requires a spcifie nozzle/feeder. ►Changes in spcifications and appearance may be made without notice for product improvement. iHomepage http://panasonic.net/pfsc/ ►Recycled paper is used for this Catalog.

Open the catalog to page 1

A wide range ^variations ■ Machine configuration The most suitable module can be selected to place components from microchips to odd-shaped components, as well as depending on the products and the production volume. 'Heads can be changed after purchase. ect Direct tray feeder DT40S-20 0 tray feeder r Placement m head Support for Support for small and I Support for micro-chips middle-sized components 1 large components 1 High-speed head High-flexibility head Multi-functional head (12 nozzles) (8 nozzles) (3 nozzles) JEDEC trays are supported. Օ Up to 20 types of trays can be stocked....

Open the catalog to page 2