NPM-VF
2Pages

Catalog excerpts

Standard conveyor PCB dimensions Max. PCB mass Anvil conveyor (Option) Electronics Assembly System Left ← Right / Left → Right (Flow direction is selectable) Insertion direction Insertion push force Odd-form Component Insertion Machine 5.5 s Clinch angle: 60 degrees outward clinch Clinch pitch: 2.5 to 40 mm Lead bend angle：10 ∼ 40゜ Lead diameter : φ 0.4 mm ∼ φ 1.0 mm (soft copper) φ 0.4 mm ∼ φ 0.8 mm (hard copper / CP wire) Clinch specifications Applicable components Max. dimensions : L 130 mm × W 35 mm × H 60 mm ・ L 150 mm × W 38 mm × H 29 mm / Max. component mass : 200g Electric source Pneumatic source Note: Excluding the monitor, signal tower and ceiling fan cover. W 1 866 mm × D 2 332 mm × H 1 554 mm(Main body only) W 2 166 mm × D 2 332 mm × H 1 554 mm(When downstream extension conveyor is connected) 2 590 kg（Only for main body: This differs depending on the option configuration） Head Configurations Manufacturing Process Innovation Body chuck + Nozzle + Nozzle Body chuck + Nozzle + Swing nozzle Body chuck + Nozzle + Lead chuck Body chuck + Swing nozzle + Lead chuck Body chuck + Body chuck Component Supply Max. component dimension: W 20 × L 80 × H 20 mm / Max. stick width : 24 mm / Max. component mass : 2 kg in total(including stick mass) Max. component dimension: W 60 × L 80 × H 45 mm / Max. stick width: 64 mm / Max. component mass: 2 kg in total(including stick mass) Radial tape Max. body dimension: Max. Φ 20 × H 30 mm / Lead pitch: 2.5 / 5.0 / 7.5 / 10.0 mm Max. tray dimension: L 230 × W 335 × D 69 mm / Max. pallets per feeder: 20 / Max. mass: 20 kg (magazine + pallet + tray + components) Customized spec Max. number of products to be loaded Machine Configuration 30-slot fixed supply unit *5 30-slot fixed supply unit 13-slot fixed supply unit + single tray feeder Rear Twin tray feeder Single tray feeder + Bowl feeder × 2 System Note: Max. 3 NPM-VF can be connected to AM-LNB Up to 15 machines of the NPM series (including NPM-VF) or the SP series can be connected to LNB. Optional functions Component verification, Traceability, Automatic changeover, Host communication, iLNB line control including other company’ machine s SMT components *7 Applicable components Placement specs Min. dimensions: L 5 mm × W 5 mm or larger (For tape, embossed tape of 12 mm or larger) Head: Nozzle only Placement accuracy: QFP ±0.05 mm (Cpk ≧ 1) Max. tact time: 3000 cph (per head) Tape feeder width Supply unit(embossed tape) * Placement tact time may differ slightly depending on conditions. *Please refer to the specification booklet for details. *1: PCB mass after insertion (including carrier mass) *2: Except when anvil is attached *3: During 2-head operation (configured similar to 2-beam specs) under optimum conditions *4: Custom specs…Connection via the host feeder *5: For front side configuration, select between 30 stations fixed supply unit (Std.) or feeder cart (Option) *6: For Body chuck + Nozzle + Nozzle *7: Standard conveyor specs Safety Cautions ●Please read the User's Manual carefully to familiarize yourself with safe and effective usage procedures. ● To ensure safety when using this equipment, all work should be performed according to that as stated in the supplied Operating Instructions. Read your operating instruction manual thoroughly. Panasonic Group products are built with the environment in mind. Inquiries… Please check the homepage for the details. panasonic.com/global/corporate/sustainability Model Name Panasonic Corporation Process Automation Business Division 3-1-1 Inazu-cho, Toyonaka City, Osaka 561- 0854, Japan TEL +81-6-6866- 8675 FAX +81-6-6862- 0422 All data as of January 1, 2020 Ver.January 1, 2020 © Panasonic Corporation 2020 ●Changes in specifications and appearance may be made without notice for product improvement. ●Homepage industrial.panasonic.com/w

Open the catalog to page 1

process via automation of odd-form Features and aims of NPM-VF Line Solution 1 and flexible: various configuration of head tools and 2 Versatilefeeder configuration to adapt to different types of components machine stable production 3 Contribute to manpower reduction andquality insertion with high productivity, flexibility, high Automation of odd-form components insertion process. In addition, SMT specifications* are also supported. Reduce manual insertion assembly process Prevent human errors, improve quality *supports both SMT placement + odd-form insertion （developing） Axial inserter...

Open the catalog to page 2