NPM-GPL
3Pages

Catalog excerpts

The inclusion of AOI in M2M system to realize high-quality production Screen Printer Electronics Assembly System Catalogue Printing condition optimization control _(APC-5M) (option)_ By changing each printing parameter condition, such as printing pressure, squeegee speed and snap-off rate, based on result data from SPI , it helps reach and maintains optimal printing condition (volume). •APC-FB function Based on result data from SPI , it corrects printing positions and volume. There are two correction options available : position correction and volume correction. Since APC-FB (volume) controls solder volume by changing the squeegee angle , it helps reach smoothly and maintains optimal printing condition. APC-FB (position) (option) NPM-GP/L + Third-party placement machine + APC-5M + APC-FB NPM G I NIP : APC-5M control software (NPM-GP/L-specific) + Third-party interface software , LPC : APC-5M control software (mounter-specific) , LNB / iLNB: Line network box , NPM-DGS: Data creation system *Values such as cycle time and accuracy may *1: When"Paper-free Wiping Unit ,""automatic support pin exchange”or vary depending on operating conditions. "Attack variable angle squeegee"has been selected , the limit of *Please refer to the "Specification booklet" for details. the maximum PCB width changes. For details , refer to "Specification manual." *2: The PCB replacement time differs depending on downstream and upstream machine types , PCB size, the use of PCB holders, etc. *3: For Metal Mask specs , refer to Specification manual. *4: Blowers and vacuum pumps (option) included. *5: Signal tower and touch panel excluded. *6: When the machine is fully optioned. Safety Cautions • Please read the User's Manual carefully to familiarize yourself with safe and effective usage procedures. •To ensure safety when using this equipment, all work should be performed according to that as stated in the supplied Operating Instructions. Read your operating instruction manual thoroughly. Panasonic Group products are built with the environment in mind. Panasonic GREEN IMPACT Process Automation Business Division 3-1-1 Inazu-cho, Toyonaka City, Osaka 561-0854,Japan All data as of January 1, 2023 | Ver.January 1, 2023 | © Panasonic Connect Co., Ltd. 2023 “NPM-GP/LModel No.NM-EJP2B •Changes in specifications and appearance may be made without notice for product improvement. •Please contact us via our website at https://industrial.panasonic.com/ww/r/fw

Open the catalog to page 1

"Autonomous Factory Concept A factory that immediately responds to every situation and continues to evolve autonomously Automation / Labor-saving Solution + Intelligent system Solution to Achieve Manufacturing That Is Further in Line with Production Plan Ensuring the production of non-defective items through the integrated control of autonomous uninterrupted mounting lines and ﬂoors independent of any human intervention and judgment Advancements in components and PCBs Sudden change in demand / supply Changing needs Digitalization of manufacturing Semiconductor shortage Decreased labor...

Open the catalog to page 2

Maximizing OEE through Replacement of Skills by Automation / Line Solutions Machine condition monitoring (preventive / predictive maintenance) Increased production time It monitors the machine conditions in real time and by that optimizes the timing of maintenance and increases production time. (1) Reduces machine availability losses through automation of operations required for model changeover. (2) Reduces machine performance losses through automation of operations involved in production. (3) Increases production time by monitoring machine conditions and thereby performing maintenance at...

Open the catalog to page 3