Electronics Assembly System catalog High Speed Axial Lead Component Insertion Machine High speed insertion of 0.12 s/component, sequential component supply system and vertical automated feeder enable high productivity. * It may not conform to Machinery Directive and EMC Directive in case of optional configuration and custom-made specification. No.of component inputs 40 + 40 + JW (JW is optional) Applicable components Resistors1/8 W,1/6 W,1/4 W,1/2 W, Jumper wire (tin-plated wire), Diodes, Cylindrical ceramic capacitor Resistors1/8 W,1/6 W,1/4 W,1/2 W, Jumper wire (tin-plated wire), Diodes, Cylindrical ceramic capacitor Insertion direction Electric source *2 Pneumatic source Dimensions Mass *4 * Values such as maximum speed may vary depending on operating conditions. * Please refer to the ‘‘Specification’’ booklet for details. *1: On condition *2: Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V *3: Excluding signal tower *4: Only for main body

0.12 s / component high speed insertion The high speed axial component insertion machine adopting sequential component supply system allow you to attain 0.12 s/ component and transfer speed of 2 s/ board. Highly efficient production The fixed component feeder unit and the out-of-component detection feature allow you to replenish components beforehand for long-term non-stop operation. The fixed component supply unit allow you to splice while running equipment. The two-separate component supply unit offer selection of connection/preparation/exchange modes according to your production style. (80-type...