Catalogs >
Panasonic Electric Works Europe >
PM5S - analog DIN-rail timer

PM5S - analog DIN-rail timer
7Pages

Catalog excerpts

31 Features • 24-240V AC/DC free-voltage input • Built-in Screw terminals • 6 different operation modes: (PM5S-A) • Multiple time ranges — 1 s to 500 h (Max.) • Slim body — DIN 22.5 mm .886 inch • 0 setting instantaneous output operation • UL/C-UL/CE approval 75.0 2.953 22.5 .886 98.5 3.878 mm inch Product types Type PM5S-M PM5S-A PM5S-S Operation mode Contact arrangement Time range Rated operating voltage Protective construction Part number PM5S-A-24-240V PM5S-S-24-240V PM5S-M-24-240V 16 selectable ranges 1s to 500h Relay Timed-out 1 Form C Instantaneous 1 Form C Relay Timed-out 2 Form C Relay Timed-out 2 Form C 6 operation modes • Pulse ON-delay • Pulse Flicker • Pulse ON-flicker • Signal OFF-delay • Pulse One-shot • Pulse One-cycle Power ON-delay 6 operation modes (With instantaneous contact) • Pulse ON-delay • Pulse Flicker • Pulse ON-flicker • Signal OFF-delay • Pulse One-shot • Pulse One-cycle IP40 24 to 240V AC/DC PM5S-A/PM5S-S/PM5S-M All types of PM5S timer have multi-time range. 16 time ranges are selectable. 1s to 500h (Max. range) is controlled. Time range 1 Scale Time unit 0.1s to 1s sec min hrs 10h 0.1 min to 1 min 0.1h to 1h 1.0h to 10h 5 Control 0.5s to 5s time range 0.5 min to 5 min 0.5h to 5h 5h to 50h 10 1.0s to 10s 1.0 min to 10 min 1.0h to 10h 10h to 100h 50 5s to 50s 5 min to 50 min 5h to 50h 50h to 500h Note: 0 setting is for instantaneous output operation. C-UL File No.: E59504 (Vol. 3) DIN24 SIZE MULTI-RANGE ANALOG TIMER PM5S-A PM5S-S PM5S-M PM5S-A/S/M 02/2003

Open the catalog to page 1

32 CHARACTERISTICS WIRING DIAGRAMS Item Type PM5S-A PM5S-S Rated operating voltage 24 to 240V AC/DC 50/60Hz common 5A 250V AC (resistive load) Power ON-delay Pulse ON-delay Pulse Flicker Pulse ON-Flicker Signal OFF-delay Pulse One-shot Pulse One-cycle Pulse ON-delay Pulse Flicker Pulse ON-flicker Signal OFF-delay Pulse One-shot Pulse One-cycle (with instantaneous contact) Rated frequency Output rating 1s to 500h (Max.) 16 time ranges switchable ±0.3% (power off time change at the range of 0.1s to 1h) ±10% (Full-scale value) ±0.5% (at the operating voltage changes between 85 to 110%) Max....

Open the catalog to page 2

34 OPERATION MODE PM5S-A/M Note: Keep 0.1s or more for power off time. Keep 0.05s or more for signal, input time. Operation mode Operation Time chart Power supply Signal A1-B1 Relay output (NO contact) OUT. LED POWER LED ON ON ON T T Power supply Signal A1-B1 Relay output (NO contact) OUT. LED POWER LED ON ON ON T T t1 T t2 Power supply Signal A1-B1 Relay output (NO contact) OUT. LED POWER LED ON ON ON T T t1 T T Power supply Signal A1-B1 Relay output (NO contact) OUT. LED POWER LED ON ON ON T t1 t2 LED lighting LED flickering T: Setting time t1, t2.ÿ . ÿ Turn the operation selector to ....

Open the catalog to page 4

35 Note: Keep 0.1s or more for power off time. Keep 0.05s or more for signal, input time. Operation mode Operation Time chart Turn the operation selector to . Timing operation starts when terminals A1 – B1 are connected while power is ON. Control output is turned on after the set time, the pulse is 0.5 to 1.0 s. OC PM5S-S Operation mode Operation Time chart When power is applied continuously, the time cycle begins. The output contacts change state after the time delay is completed. Power ON-delay ON ON T T t1 0.5-1.0S Power supply Signal A1-B1 Relay output (NO contact) OUT. LED POWER LED ON...

Open the catalog to page 5

36 INPUT CONNECTIONS The inputs of the PM5S-A/M are voltage (voltage imposition or open) inputs. MOUNTING AND DISMOUNTING The PM5S should be mounted as horizontally as possible. When mounting the PM5S on a socket mounting track, hook portion (A) of the Timer to an edge of the track first, and then depress the Timer in the direction of (B). When dismounting the PM5S pull out portion (C) with a flatblade screwdriver and remove the Timer from the mounting track. POWER SUPPLIES The PM5S Series is provided with a transformerless power supply system. An electric shock may be received if the input...

Open the catalog to page 6

37 Operating voltage 24 to 240 V AC Surge voltage 4,000 V TERMINAL CONNECTIONS • Refer to the terminal layout and wiring diagram and securely connect the terminals accordingly. • Do not allow control output to exceed rated control capacity. 1. When one input signal is simultaneously applied to more than one timer, be sure to avoid the wiring shown in Fig. A. Otherwise, the short-circuit current will flow and cause damage. Be sure to align the polarity of the power supply as shown in Fig. B. 2. External surge protection may be required if the following values are exceeded. Otherwise, the...

Open the catalog to page 7