Catalogs >
Panasonic Electric Works Europe >
Limit switches AZH

Limit switches AZH
14Pages

Catalog excerpts

HL (AZH) Limit Switches COMPACT SIZE LIMIT SWITCHES • Wide selections of actuators, terminals and bodies to meet any application • Excellent environmental resistance Die-casting case—IEC IP67 Plastic case—IEC IP64 • Highly reliable operation Bifurcated contact (Au clad) suitable for low-level circuit control • Connector type for easy installation Easy on side installation with M4 screws • Compact design good for limited mounting space 17% less mounting space compared with ML (AZ7) Limit Switch • Conforms to UL/CSA TÜV standards PRODUCT TYPE 1. Limit Switches Die-casting case Type Actuator Standard Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount cross roller plunger Sealed push plunger Sealed roller plunger Sealed cross roller plunger Short roller lever Roller lever One-way short roller lever One-way short lever Flexible rod Plastic case Screw terminal Screw terminal AZH2031 AZH2032 AZH2033 AZH2011 AZH2012 AZH2013 AZH2041 AZH2021 AZH2044 AZH2024 — Connector type Bifurcated contact Bifurcated Without LED With LED Common to panel mount push plunger Common to panel mount roller plunger Common to panel mount cross roller plunger AZH2231 AZH2331 AZH233116 AZH2232 AZH2332 AZH233216 AZH2233 AZH2333 AZH233316 AZH2211 AZH2311 AZH231116 AZH2212 AZH2312 AZH231216 AZH2213 AZH2313 AZH231316 AZH2241 AZH2341 AZH234116 AZH2221 AZH2321 AZH232116 AZH2244 AZH2344 AZH234416 AZH2224 AZH2324 AZH232416 — — — Standard Bifurcated AZH1001 AZH1002 AZH1003 AZH1031 AZH1032 AZH1033 AZH1011 AZH1012 AZH1013 AZH1041 AZH1021 AZH1044 AZH1024 AZH1066 AZH1201 AZH1202 AZH1203 AZH1231 AZH1232 AZH1233 AZH1211 AZH1212 AZH1213 AZH1241 AZH1221 AZH1244 AZH1224 AZH1266 2. Accessories Product Pin arrangement Type Straight Cable connector cord AC Angle Specifications Core No. Color of wire Brown White 4 Blue Black Conductor Length of cable 0.5 mm2 (Circumference: 6.5 dia.) 3m 9.843 ft Application All connector type Part No. AZH28113 AZH28133 FOREIGN STANDARDS Standard UL CSA TÜV 8 Applicable product File no.: E122222 Ratings: Normal load: 5 A, 250 VAC (105 cycles), Pilot Duty B300 Minute load: 0.1 A, 30 VDC Certified products: All models File no.: LR55880 Ratings: Normal load: 5 A, 250 VAC, Pilot Duty B300 Minute load: 0.1 A, 30 VDC Certified products: All models File no.: Resin case type J9650515 Die-cast case type J9650514 ... Ratings: Normal load for resin case type: AC–15 2A/250V~, DC–12 1A/30V — ... Minute load for resin case type: DC–12 0.1A/30V — ... Normal load for die-cast case type: DC–12 1A/30V — ... Minute load for die-cast case type: DC–12 0.1A/30V — Certified products: All models except those with LED lamps 10/2010 Part No. Order using the standard part number. Place a CE at the end of the part number when ordering.

Open the catalog to page 1

HL (AZH) 4. Performance data for EN60947-5-1 Plastic case Standard Degree of contamination Die-casting case Bifurcated 250V AC 2.5kV 0.8kV 1A 100A 10A Fuse 30V DC 1.5kV 0.8kV 5A 100A 10A Fuse 30V DC 1.5kV 0.8kV 1A 100A 10A Fuse IP64 (switch) IP54 (terminal) IP67 IP67 3 Protective construction Die-casting case Standard IP64 (switch) IP54 (terminal) Rated insulated voltage Impulse withstand voltage Switching excess voltage Rated closed thermocurrent Conditional short-circuit current Short-circuit protection Plastic case Bifurcated 250V AC 2.5kV 2.5kV 5A 100A 10A Fuse Item 3 3 3 OUTPUT CIRCUIT...

Open the catalog to page 3

HL (AZH) MOUNTING METHOD Die-cast case 1. Side mounting (all types) M4 screw is used for mounting on side. Mount it firmly with washer. Mounting torque is 1.37 to 1.57 N.m. Remove the hexagonal nut when plunger type is used in side mounting. 2. Panel mounting (Panel plunger type) When the panel mounting type is fixed on the panel, the torque of hexagonal nut is set under 7.84 N.m. Panel mounting hole dimensions Side mounting hole dimensions Plastic case Side mounting (all types) M4 screw is used for mounting on side. Mount it firmly with washer. Mounting torque is 1.18 to 1.47 N.m. Side...

Open the catalog to page 13

HL (AZH) HOW TO CHANGE THE CORD OUTLET DIRECTION FOR CONNECTOR TYPE The cord outlet direction is interchangeable both right and left sides. The direction of connector cord is set to the right when it is shipped. When it is used left side direction, follow the next procedure. Cord outlet direction (Right side) Step 1 Fitting metal Step 3 Step 2 Cramp Body Terminal cover Seal rubber • Do not put the lead wire between terminal cover and body. • Put the seal rubber at the right place. • Press up the terminal cover. Push down the fitting metal while pulling it horizontal direction. Turn the...

Open the catalog to page 14