Catalogs >
Panasonic Electric Works Europe >
HIGHLIGHTS FOR ECO INNOVATIONS

HIGHLIGHTS FOR ECO INNOVATIONS
12Pages

Catalog excerpts

COMPONENT GUIDE HIGHLIGHTS FOR ECO INNOVATIONS

Switching Devices Introduction to electromechanical relays Telecommunications, machine construction, measurement and control systems, automotive electronics, building security and installation – today there is virtually no branch of human activity that can exist without using modern relays. Load switching capability ranges from low-level signals to double-digit ampere values. Panasonic relays are available for all common mounting configurations with screw, PCB, solder or surface mount terminals to meet most demands of operating environments and conditions. Panasonic is able to meet both...

Open the catalog to page 2

DE series: Compact relays Miniature 8A/10A power relay • • • • • Low coil power High switching capacity: 16A = 25.000 ; 10A = 100,000 switching cycles Creepage and clearance distance: min. 8mm Mounting method: PCB Conforms to European safety standards: EN60730 and EN60335 Size in mm: 25 x 12.5 x 12.5 (LxWxH) Switching current Max. switching voltage Contact arrangement Typical applications Breakdown voltage between open contacts Breakdown voltage between contact sets Breakdown voltage between contacts and coil Surge withstand voltage Coil voltage Coil power Single side stable: 200mW 1 coil...

Open the catalog to page 3

Switching Devices PF series: Slim 6A type relay Very slim type relays with high power capacity • • • • • • • Optimized lifetime Slim size with wide switching capacity High surge voltage (6,000V) and high breakdown voltage (4,000V) Insulation construction conforms to VDE0700 Contacts with silver nickel or silver nickel gold-clad Clearance distance min. 5.5mm Creepage distance min. 8mm Size in mm: 28 x 5 x 15 (LxWxH) Switching current Contact arrangement Breakdown voltage between open contacts Print socket available with LED indicator * 8A 277V AC General use (UL, C-UL, File No. E120782) 8A...

Open the catalog to page 4

SF-Y series: Compact, flat relays with forcibly guided contacts Approvals: EN61810-1, EN50205, EN50178 NEW Reinforced insulation Available as 4-pole and 6-pole types with various contact arrangements Gold-clad contacts available upon request Polarized rotating armature for low nominal operating power and high shock and vibration resistance Size in mm: 31 / 39 x 28.6 x 14.5 (LxWxH) Switching current Max. switching voltage Contact arrangement Typical applications Breakdown voltage between open contacts Breakdown voltage between contact sets Breakdown voltage between contacts and coil Coil...

Open the catalog to page 5

PhotoMOS and Solid State Relays Introduction to PhotoMOS and Solid State Relays What makes PhotoMOS relays so successful? Modern semiconductor technology enables fast, quiet, bounce-free switching, even in miniature sizes. PhotoMOS relays nevertheless enjoy an almost unlimited lifetime if used according to the specifications. Moreover, they are extremely reliable, unaffected by vibrations, and their ON-resistance remains stable throughout their entire lifetime. PhotoMOS technology The basic construction of the PhotoMOS relay can be seen in the illustration. Light emitted from an LED on the...

Open the catalog to page 6

AQ-A series: Hockey puck type Solid State Relays Small screw terminal relay with load current from 15 to 40A • • • • • Photo-Triac Zero-cross and random type available Wide range input, built-in varistor and LED indication Various types of heat sinks to achieve max. load current Pre-mounted terminal cover to protect touching output side with load voltage Size in mm: 58 x 40 x 25.5 (LxWxH) Typical applications Load voltage Input current Operate time Max. 1/2 cycle of voltage sine wave + 1ms Release time Max. 1/2 cycle of voltage sine wave + 1ms Insulation resistance Min. 100MΩ between input...

Open the catalog to page 7

AEQ series: Low level load switches 100µA at 3V DC Carries low level load and contributes to energy savings • • • • • High contact reliability by double-sided sliding & gold-plated contact Ultra long stroke of 2.5mm for NC contact Stable contact pressure without bouncing No operational click sound by sliding contact 10 times lower switching current compared with other switches Size in mm: 13.3 x 8.4 x 13.4 (LxWxH) Actuator type: Contact form Leaf lever Electrical switching life 3VDC 0,1mA (resistive load): min. 2x105 30VDC 100mA (resistive load): min. 105 Simulated leaf lever Switching...

Open the catalog to page 8

Grid-EYE: 2D matrix thermopile sensor Panasonic’s proprietary passive infrared technology NEW Temperature detection a two-dimensional area of 8×8 pixels (64) Digital output of temperature values Miniature SMD package; reflow mounting supported Detects motionless objects Size in mm: 11.6 x 8 x 4.3 (LxWxH) Detection distance Viewing angle Current consumption Normal mode: 4.5mA (typical) Sleep mode: 0.2mA (typical) Stand-by mode: 0.8mA (typical) Typical applications Home automation: lighting control etc. 64 (vertical 8 × horizontal 8 matrix) Frame rate Output mode Temperature output...

Open the catalog to page 9

FPC connectors: Back lock type Designed for space saving applications • • • • Mechanical design freedom is achieved with double top and bottom contacts Wiring patterns can be placed underneath the connector Easy-to-handle back lock design Man-hours of assembly time can be reduced by delivering the connectors with their levers opened • Nickel barrier helps resist solder creepage Size depends on the number of contacts Mated height Lock structure Back lock Typical applications Top and bottom double contact (except Y3BL) Terminal capability 0.2A / terminal (max. 5A at total pin contacts)...

Open the catalog to page 10

Advanced technologies Tough Contact Advanced technology Tough against dropping Tough against solder rise Bellows contact construction improves the ability to withstand twisting and increased resistance to shock of dropping. Solder remains in the terminal area and a stable fillet of the soldering joints is possible. Prevents contact area from solder rise. Tough against foreign particles and flux Tough against corrosive gases Prevents foreign substances from contact area, doubles the contact points and increases contact pressure An area where the nickel-plated layer is exposed has been...

Open the catalog to page 11