FM-200
12Pages

Catalog excerpts

Integrated Display Type DIGITAL FLOW SENSOR FM-200 SERIES Conforming to EMC Directive Dual color with sub display at a glance Easy-to-read 2-color display with sub display

Open the catalog to page 1

Easy-to-see dual color with sub display! The setting conditions are displayed on the sub display, making it much easier to keep track of operations. In addition, the digital display which switches between 2 colors lets you check the status of sensor operation at a glance. Sub display Main display Dual color display at a glance Easy to see with the sub display! The display color changes in accordance with output ON / OFF operations. Setting values and setting items can be checked at the same time. Main display Setting value Main display Setting item Principle of Si sensor chip A single...

Open the catalog to page 2

Low flow rate type FM-252-4(-P) / FM-213-4(-P) FM-253-4(-P) / FM-214-4(-P) ●Port size: ø4 mm ø0.157 in push-in ●Size: W17 × H37 × D64 mm W0.669 × H1.457 × D2.520 in ●Body material: Resin ■ Flow rate range 0.5 ℓ/min. 1 ℓ/min. 5 ℓ/min. 10 ℓ/min. Smallest Type Medium flow rate type FM-254-8(-P) FM-215-8(-P) ●Port size: ø8 mm ø0.315 in push-in ●Size: W17 × H43 × D70.6 mm W0.669 × H1.693 × D2.780 in ●Body material: Resin High flow rate type ■ Flow rate range Industry’s smallest in size (Based on research conducted by SUNX as of March 2008) FM-255-AR2(-P) / FM-255-AG2-P FM-216-AR2(-P) /...

Open the catalog to page 3

Suitable for cost and quality control! Integrated output mode incorporated The FM-200 series can control and manage flows in a wide variety of output modes such as integrated output mode, depending on the required application. Integrated flow rate display Integrated ﬂow rate can be displayed with 7 digits Integrated output mode Quality control When the volume of flow of the gas being measured reaches the set integrated value, output switches to ON or OFF. Integrated flow rate ●Controls N2 charging volumes for electronic components ●Controls air blowing volumes, etc. Integrated flow value 0...

Open the catalog to page 4

Applications Controlling purge gas and air blowing Checking seating Checking suction By controlling purge gas and air blowing, performance and quality of the products can be maintained, while contributing to cost reduction. Flow sensors can be used for stable detection of transparent objects which were difficult to detect using photoelectric sensors. The nozzle can be extended for detection even in places where oil spatter occurs. Detection of objects is possible even on conveyors with low suction pressures where air is flowing constantly (such as collet conveyors and network conveyors)....

Open the catalog to page 5

FM-200 ORDER GUIDE Type Applicable fluid Flow rate range Resin body type 1,000 mℓ/min. 5 ℓ/min. 10 ℓ/min. Clean air (Note) Compressed air (Note) Nitrogen gas Port size Comparative output Aluminum body type PNP Open-collector transistor NPN Open-collector transistor female thread Note: The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. Accessory • CN-F15-C1 (Connector attached cable 1 m 3.281 ft) OPTIONS Designation Sensor mounting bracket Panel mounting bracket Allows resin body type sensor to be installed on the flooring....

Open the catalog to page 6

FM-200 SPECIFICATIONS Individual specifications Type Item Resin body type FM-252-4(-P) Integrated Instant flow rate flow rate Full scale flow rate (Note 1) 500 mℓ/min. 1,000 mℓ/min. 5 ℓ/min. 10 ℓ/min. Display range (Note 2) –550 to +550 mℓ/min. –1,100 to +1,100 mℓ/min. –5.5 to +5.5 ℓ/min. –11 to +11 ℓ/min. Setting and display resolution 1 mℓ/min. 0.01 ℓ/min. Display range (Note 2) ±9999999 mℓ ±99999.99 ℓ Setting and display resolution 1 mℓ 0.01 ℓ Specified integrated value 5 mℓ 10 mℓ 0.05 ℓ 0.1 ℓ Port size ø4 ø0.157 push-in Weight Net weight: 50 g approx., Gross weight: 115 g approx. Type...

Open the catalog to page 7

FM-200 I/O CIRCUIT AND WIRING DIAGRAMS FM-2□ Wiring diagram Color code of connector attached cable (Brown) +V 1 (Black) CH1 D2 (Comparative output 1) Load Main circuit Tr2 1 kΩ approx. Varistor (Note 1) Internal circuit Load Load 50 mA max. (White) CH2 (Comparative output 2 / External input) 50 mA max. 4 (Gray) Analog voltage output (Note 2) 5 (Blue) 0 V * 1: When using CH2 as a comparative output 2 * 2: When using CH2 as an external input Users’ circuit A Notes: 1) s for the aluminum body type, varistor (clamping voltage approx. 40 V) is connected between the internal power circuit and the...

Open the catalog to page 8

FM-200 PRESSURE LOSS CHARACTERISTICS (TYPICAL) FM-213-4(-P) PRECAUTIONS FOR PROPER USE • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Part description MODE key Main display (Green / Red) Sub display (Green / Red) Connector area for connector attached cable Connector area for piping (Note 2) Terminal arrangement diagram Terminal arrangement of the connectors of this...

Open the catalog to page 9

FM-200 PRECAUTIONS FOR PROPER USE Mounting • This product can be installed facing up or down or to the left or right. Horizontal mounting • Use M3 screws, and the tightening torque should be 0.5 N·m. • Install a filter, an air dryer and an oil mist filter (microalescer) onto the primary side (upstream) of this product since the compressed air from the compressor contains drain (water, oil oxide and foreign materials, etc.). Mesh (wire net) in this product is used to rectify the flow in the pipe. Always install a filter to the primary side of this product since this mesh is not a filter to...

Open the catalog to page 10

FM-200 PRECAUTIONS FOR PROPER USE • Take care if foreign materials are mixed in the sensing part, the product may break. • Do not use this product for commercial purposes since the product does not comply with International System of Units (SI). • Do not apply pressure that exceed resistant-pressure. • Do not use during the initial transient time (approx. 5 sec.) after the power supply is switched ON. • The specifications may not be satisfied in a strong magnetic field. • Accuracy of the display and the analog voltage output is influenced by self-heating by applying current other than the...

Open the catalog to page 11