Catalogs >
Panasonic Electric Works Europe >
Automation Controls Catalog

Automation Controls Catalog
14Pages

Catalog excerpts

Automation Controls Catalog Long Stroke, Sliding Contact Construction Sealed Switches Turquoise Stroke Mini Switches Terminal type (Solder terminal) Terminal type (Fork terminal) Wire leads type TYPICAL APPLICATIONS • Miniaturization achieved with changing from 1 Form C to 1 Form A or 1 Form B contacts. (For the terminal type, volume has been cut 45% compared to our previous product.) • Lever installation possible while it is small size. Operation possible by various moving parts such as metal cams. • Contact force does not depend on the operation stroke. • High contact reliability to support low level switching loads. • resistance against adverse environments. (IP67) • Silent operation with sliding contacts. • Automobiles (detection of door opening and closing, shift lever position, etc.) • Household appliances (vacuum cleaners, air conditioners, washing machines, electric power tool, etc.) Terminal 1: Slim terminal 2: Wire leads right side type 3: Wire leads left side type 4: Solder terminal 6: Wire leads bottom type A: Fork terminal (R) B: Fork terminal (L) Mounting 1: Without boss 6: Right 2 boss type 7: Left 2 boss type 8: Both sides 2 bosses type Contact form 2: Normally Closed type (NC) 3: Normally Open type (NO) Actuator 0: Pin plunger 8: Simulated roller lever Note: Not every combination is available. Please refer to the following table, “PRODUCT TYPES”. PRODUCT TYPES Shape Right 2 boss type Left 2 boss type Both sides 2 bosses type Normally close type (NC) Normally open type (NC) Normally close type (NC) Normally open type (NC) Normally close type (NC) Normally open type (NC) Solder terminal Simulated roller lever Slim terminal Simulated roller lever Fork terminal Simulated roller lever

Open the catalog to page 1

Turquoise Stroke Mini Switches (ASQM1) Direction Bottom Right side Left side Normally Closed type (NC) Normally Open type (NO) Simulated roller lever Simulated roller lever Simulated roller lever Item Ambient and storage temperature Allowable operating speed Max. operating cycle rate –40°C to +85°C (no freezing and condensing) 30 to 500 mm/sec. 120 cpm depending on the load capacity. Please consult us. Item Dielectric strength (Initial) Between non-continuous terminals: 500 Vrms, Between each terminal and other exposed metal parts: 1,500 Vrms, Between each terminal and ground: 1,500 Vrms...

Open the catalog to page 2

Turquoise Stroke Mini Switches (ASQM1) Characteristics Operating Force (OF) Max. Total Travel Force (TF) Max. (Reference value) Terminal type Free Position (FP) Max. Wire leads type Terminal type Operating Position (OP) Wire leads type Terminal type Release Position (RP) Wire leads type Terminal type Over Travel (OT) Min. Wire leads type Total Travel Position (TTP) (Reference value) Terminal type Wire leads type Pin plunger 1.2N (3.0N) 7.7mm 14.45mm Initial: 7.1±0.25mm After test: 7.1±0.3mm Initial: 13.75±0.35mm After test: 13.75±0.4mm Initial: 7.15±0.3mm After test: 7.15±0.35mm Initial:...

Open the catalog to page 3

Turquoise Stroke Mini Switches (ASQM1) DIMENSIONS (Unit: mm) The CAD data of the products with a CAD Data mark can be downloaded from https://industrial.panasonic.com/ac/e/ Total Travel Force (TF) Max. (Reference value) External dimensions Free Position (FP) Max. Operating Position (OP) Initial: 7.1±0.25mm After test: 7.1±0.3mm Release Position (RP) Over Travel (OT) Min. 2.6±0.05 Total Travel Position (TTP) (Reference value) Initial: 7.15±0.3mm After test: 7.15±0.35mm External dimensions Total Travel Force (TF) Max. (Reference value) Free Position (FP) Max. Operating Position (OP) 2.6±0.05...

Open the catalog to page 4

Turquoise Stroke Mini Switches (ASQM1) Operating Force (OF) Max. Total Travel Force (TF) Max. (Reference value) Free Position (FP) Max. Operating Position (OP) Initial: 1.75mm After test: 1.70mm Total Travel Position (TTP) (Reference value) Initial: 7.15±0.3mm After test: 7.15±0.35mm Initial: 7.1±0.25mm After test: 7.1±0.3mm Total Travel Force (TF) Max. (Reference value) Initial: 1.75mm After test: 1.70mm Total Travel Position (TTP) (Reference value) Initial: 7.15±0.3mm After test: 7.15±0.35mm Over Travel (OT) Min. 7.6 Bend root 7.7mm Initial: 7.1±0.25mm After test: 7.1±0.3mm Total Travel...

Open the catalog to page 5

Turquoise Stroke Mini Switches (ASQM1) Operating Force (OF) max. Total Travel Force (TF) max. (Reference value) Total Travel Position (TTP) (Reference value) Initial: 2.25mm After test: 2.15mm Initial: 11.05±0.7mm After test: 11.05±0.8mm Operating Position (OP) Release Position (RP) Initial: 10.75±0.6mm After test: 10.75±0.7mm Total Travel Force (TF) Max. (Reference value) Initial: 1.65mm After test: 1.60mm （11.75mm） 3.2 Sealing compound climbing up the wire leads 2Max. Initial: 13.8±0.4mm After test: 13.8±0.45mm Total Travel Position (TTP) (Reference value) Sealing compound climbing up the...

Open the catalog to page 6

Turquoise Stroke Mini Switches (ASQM1) CAD Data Total Travel Force (TF) Max. (Reference value) Initial: 1.65mm After test: 1.60mm （11.75mm） Bulge of the sealing compound 1Max. Sealing compound climbing up the wire leads 2Max. Initial: 13.8±0.4mm After test: 13.8±0.45mm Total Travel Position (TTP) (Reference value) Bulge of the sealing compound 3Max. Release Position (RP) Over Travel (OT) Min. 14.45mm Initial: 13.75±0.35mm After test: 13.75±0.4mm Initial: 2.15mm After test: 2.05mm Initial: 17.7±0.8mm After test: 17.7±0.9mm Initial: 17.4±0.7mm After test: 17.4±0.8mm Total Travel Position...

Open the catalog to page 7

Turquoise Stroke Mini Switches (ASQM1) Total Travel Force (TF) Max. (Reference value) Operating Position (OP) Release Position (RP) Initial: 17.7±0.8mm After test: 17.7±0.9mm Initial: 17.4±0.7mm After test: 17.4±0.8mm Initial: 2.15mm After test: 2.05mm Total Travel Position (TTP) (Reference value) Bulge of the sealing compound 3Max. Bulge of the sealing compound 1Max. Sealing compound 5±2 climbing up the wire leads 2Max. Total Travel Force (TF) Max. (Reference value) Initial: 17.7±0.8mm After test: 17.7±0.9mm Initial: 2.15mm After test: 2.05mm Initial: 17.4±0.7mm After test: 17.4±0.8mm...

Open the catalog to page 8