Catalogs >
Panasonic Electric Works Europe >
Analog heat detector 3308

Analog heat detector 3308
2Pages

Catalog excerpts

Panasonic Electric Works Fire & Security Technology Europe AB Jungmansgatan 12, SE-211 19 Malmö, Sweden Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99 info-fste@eu.pewg.panasonic.com • www.panasonic-fire-security.com Fire alarm systems Analog heat detector 3308 • Different modes for compatibility with other EBL systems • Algorithms for class A1, A2 S or B S General The analog heat detector 3308 measures the temperature through a thermistor. The temperature range is 0°C to 100°C in steps of 0.5°C. Programming/Compatibility The address setting tool 3314 is used to set the detector's COM loop address. The detector has an Address label (Al) where the programmed address is to be written. 3314 is also used to set the detector mode. • NORMAL mode (analog): Detector 3308 + analog base 3312 used in the systems EBL512 (SW version >2.x) and EBL128. The detector works as a temperature sensor where the analog readings (0°C to 100°C) are converted to digital "sensor values" that are read and evaluated by the c.i.e. Algorithms for class A1, A2 S or B S (set in Win512). • 2330 mode (conventional): Detector 3308 + analog base 3312 is used in the systems EBL512 / 1000 / 2000 as an equivalent to the 60°C conventional fixed temperature heat detectors 6270 / 6275 + addressable base 2330, i.e. as a response grade 2 heat detector (static response temperature 57°C). NOTE! The analog base 3312 has no ext. line input, like the addressable base 2330 has. • 2312 mode: Not used for 3308. Algorithms EBL512 / EBL128 uses algorithms for class A1, A2 S and B S, according to EN54- 5:2000, for fire alarm detection. Via Win512 / Win128 is an algorithm selected for each 3308 in NORMAL mode. Miscellaneous The detector has an LED that will light up when the detector goes into alarm. The detector is plugged in the analog base 3312x / 4313. The COM loop is connected to the base, which also has terminals to connect an external LED, e.g. 2218. Product applications The detector 3308 is used in the systems EBL512 / EBL128 / 1000 / 2000. It is intended for indoor use and in dry premises. Heat detectors are normally used in small rooms where the temperature can be expected to rise rapidly in case of a fire or places where smoke detectors can not be used.

Open the catalog to page 1

All technical features and data are subject to changes without notice, resulting from continuous development and improvement. Product Leaflet Date of issue Revision / Date of revision MEW00053 2000-08-24 6 / 2008-09-23 Type number 3308 Analog heat detector SA Contact pin for COM loop / address setting tool 3314 SB Contact pin for COM loop / address setting tool 3314 Tl Type number label; Detector type Al Address label Ls Locking screw Lsh Locking screw hole (prepared for drilling through detector body) E+ Contact pin for External LED E- Contact pin for External LED LED Built-in LED Prepared...

Open the catalog to page 2