AJ7 (J7) SWITCHES
8Pages

Catalog excerpts

AJ7 (J7) 134 ORDERING INFORMATION ACTUATOR INDICATIONS ON PRODUCTS MADE TO ORDER Actuator indication 0: No indication 1: indication (Indication on top) 2: indication (Indication on top) 3: indication (Side indication) 4: indication (Indication on top) 5: indication (Side indication) 7: AJ7 switch Rating & size of actuator Nil: 10A standard size W: 10A wide size 6: 6A standard size Actuator color Remark 1) W: White B: Black R: Red Z: Dark gray H: Light gray L: Blue G: Green Y: Yellow Flange color Nil: Black (standard color) (Custom ordered color: W: White, R: Red, Z: Dark gray, H: Light...

Open the catalog to page 2

AJ7 (J7) 135 PRODUCT TYPES 1. 10 A type 1) Standard actuator type (1) Without indication on actuators Remarks: 1. A letter indicating the actuator color is entered in place of asterisk. (W: White, B: Black, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green, and Y: Yellow). Standard flange color is black. For other colors type, they are custom ordered. For requests of other flange color, please enter the following letter before the “F” in the part number. (W: White, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green and Y: Yellow) 2. Long guard type is available for .187...

Open the catalog to page 3

AJ7 (J7) 136 2) Wide actuator type (1) Without indication on actuators (2) With indication on actuators Remarks: 1. A letter indicating the actuator color is entered in place of asterisk. (W: White, B: Black, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green, and Y: Yellow). Standard flange color is black. For other colors type, they are custom ordered. For requests of other flange color, please enter the following letter before the “F” in the part number. (W: White, R: Red, Z: Dark gray, H: Light gray, L: Blue, G: Green and Y: Yellow) 2. The color of indication on the actuator: • For...

Open the catalog to page 4

AJ7 (J7) 137 SPECIFICATIONS 1. Contact rating Remark: The motor load is in accordance with EN61058-1. Inrush current can be switched up to the value of 6 times the indicated rating. 2. Characteristics Remark: Test conditions are in accordance with EN61058-1, UL1054 and JIS C 6571. DIMENSIONS mm General tolerance: ±0.5 Type Voltage Resistive load (cos ö ] 1.0) Motor load (EN61058-1) (cos ö ] 0.6) 10A type 250V AC 10A 4A 6A type 6A 3A Expected life (Min. operations) Mechanical Min. 5 × 104 (at 20 cpm.) Electrical Min. 104 (at 7 cpm., at rated load) Initial insulation resistance (Between...

Open the catalog to page 5

AJ7 (J7) 139 NOTES REFERENCE 5. Wide actuator type 21 19 10 4.8 16.5 8.5 3 5.3 13 2 8.75 0.8 4.375 32°±4° 19 21.8 24 21 ON OFF 1.4 dia. 2-pole 1-pole Diagram of recommended locations for panel mounting holes Remark: Dimensions for the terminals of soldering terminal type and PC board terminal type are the same as those of standard size type. Panel thickness X 1 to less than 1.8 19.2 1.8 to 2.3 19.9 21.9+0.1 0 X +0 -0.1 +0 -0.1 mm General tolerance: ±0.5 1. Switch mounting Mount the switch with the hole cutting dimensions shown in the dimensions. Contact us if you are considering using a...

Open the catalog to page 7

AJ7 (J7) 140 INTRODUCTION TO 4P CONNECTORS FOR THE AJ7 SWITCH (produced by Nippon Tanshi co., Ltd) Notes) This AJ7 switch connector is not available from Matsushita Electric Works. Contact us for further details on this connector. Suitable switches: AJ7 switch, .187 Quick-connect terminal (Note: Terminal guard long type switches are not suitable for this connector.) Housing Product number: 4120-4204 Receptacle Product number: 171901-M2 06/2006

Open the catalog to page 8