Catalogs >
Panasonic Electric Works Corporation of America >
TQC series

TQC series
7Pages

Catalog excerpts

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type TQC series B size Features ● High voltage（35 V max.） ● RoHS compliance, Halogen free Size code Category temp. range Rated volt. range Category volt. range Rated cap. range Capacitance tolerance Leakage current B2 –55 ℃ to +105 ℃ 16 V to 35 V 16 V to 35 V 3.9 μF to 47 μF ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Dissipation factor(tan δ) Please see the attached characteristics list Surge voltage (V) Rated voltage × 1.15 +105 ℃ 2000 h (16TQC33MYFB : 1000 h), rated voltage applied Capacitance change Within ±20 % of the initial value Endurance Dissipation factor(tan δ) ≦ 1.5 times of the initial limit Leakage current Within the initial limit +60 ℃, 90 % to 95 % RH, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, −20 % of the initial value Dissipation factor(tan δ) ≦ 1.5 times of the initial limit (Steady State) Leakage current ≦ 3 times of the initial limit Rated capacitance code Rated voltage code * Externals of figure are the reference. Characteristics list CateCateRated Rated gory Rated temper- gory capacitempervoltage ature voltage tance ature (V) (V) (℃) (μF) (℃) Specifications Size Ripple*1 ESR*2 tan δ*3 code current (mA rms) Floor life level Part number Min. packaging Reflow Reflow q'ty *1: Ripple current（100 kHz / +105 ℃） *2: ESR（100 kHz / +20 ℃）　 *3: tan δ (120 Hz / +20 ℃) *4: After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" . ◆ Small order quantity (500 pcs/reel) is available with TQC series. Please contact our sales representative if you prefer it. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use

Open the catalog to page 1

Conductive Polymer Tantalum Surface Mount Type TQC series D size Solid Capacitors Features ● High voltage（35 V max.） ● RoHS compliance, Halogen free Specifications Size code Category temp. range Rated volt. range Category volt. range Rated cap. range Capacitance tolerance Leakage current D2 –55 ℃ to +105 ℃ 16 V 16 V to 25 V 16 V to 35 V 16 V 16 V to 25 V 16 V to 35 V 33 μF 22 μF to 47 μF 10 μF to 150 μF ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Dissipation factor(tan δ) Please see the attached characteristics list Surge voltage (V) Rated voltage × 1.15 +105 ℃ 2000...

Open the catalog to page 2

Conductive Polymer Tantalum Solid Capacitors TQC (D size) series Characteristics list CateRated CateRated gory Rated capacitemper- gory tempervoltage tance ature voltage ature (V) (μF) (V) (℃) (℃) Case size Size *1 Ripple code ESR*2 tan δ*3 current (mA rms) Floor life level Part number Min. packaging Reflow Reflow q'ty *1: Ripple current（100 kHz / +105 ℃） *2: ESR（100 kHz / +20 ℃）　 *3: tan δ (120 Hz / +20 ℃) *4: After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" . ◆ Small order quantity (500 pcs/reel) is...

Open the catalog to page 3

Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to...

Open the catalog to page 4

Notices / Items to be observed Notices ■ Applicable laws and regulations ・This product complies with the RoHS Directive (Restriction of the use of certain hazardous substances in electrical and electronic equipment (DIRECTIVE 2011/65/EU and（EU)2015/863)). ・ No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing this product. 　We do not use PBBs or PBDEs as brominated flame retardants. ・ Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method, on the occasion of export of this...

Open the catalog to page 5

Conductive Polymer Tantalum Solid Capacitors 　　Guidelines and precautions（POSCAP） 1. Circuit design 1.1 Prohibited circuits Since problems can be expected, POSCAP cannot be used on the following circuits. (1) High impedance voltage retention circuits (2) Coupling circuit (3) Time constant circuits (4) Circuits greatly affected by leakage current (5) The circuit in which two or more POSCAP are connected in a series so as to raise the endurance voltage. 1.2 Failure and life-span The failure rate is 0.5 %* / 1000 h (Confidence level : 60 %) based on JIS C 5003. The mainly failure modes are as...

Open the catalog to page 6

Conductive Polymer Tantalum Solid Capacitors 1.6 Leakage current Even when the soldering conditions fall within the range of this delivery specifications, leakage current increases a little on occasion. It also increases a little during high temperature storage, high humidity storage こand temperature cycling with no voltage applied. In cases such as these, leakage current will decrease by applying voltage under the condition of below the POSCAP's maximum operating temperature. The speed at which the leakage current is restored is increased by applying voltage when the POSCAP's temperature...

Open the catalog to page 7

TQC series 7Pages

Catalog excerpts

All Panasonic Electric Works Corporation of America catalogs and technical brochures

TQC series
7Pages