Catalogs >
Panasonic Electric Works Corporation of America >
SP-Cap

SP-Cap
32Pages

Catalog excerpts

2021 Conductive Polymer Aluminum Electrolytic Capacitors Products Catalog g

Conductive Polymer Aluminum Electrolytic Capacitors　INDEX Item Line-up Diagram Explanation of part numbers Mounting specifications Selection guide Packing specifications : High voltage, Low profile : Large capacitance, Super low ESR : Super low ESR, Large capacitance Replacement list for “Not recommended for new design”

Open the catalog to page 2

Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to...

Open the catalog to page 3

Notices / Items to be observed Notices ■ Applicable laws and regulations ・This product complies with the RoHS Directive (Restriction of the use of certain hazardous substances in electrical and electronic equipment (DIRECTIVE 2011/65/EU and（EU)2015/863)). ・ No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing this product. 　We do not use PBBs or PBDEs as brominated flame retardants. ・ Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method, on the occasion of export of this...

Open the catalog to page 4

Conductive Polymer Aluminum Electrolytic Capacitors 　　Application Guidelines（SP-Cap） 1. Circuit design 1.1 Prohibited circuits for use Do not use the SP-Cap with the following circuit. (1) High-impedance voltage retention circuits (2) Coupling circuits (3) Time-constant circuit (4) Circuit which are greatly affected by leakage current (5) 2 or more SP-Cap connected serially 1.2 Voltage and polarity The application of over- voltage and reverse voltage described below can cause increases in leakage current and short circuits. Applied voltage, refers to the voltage value including the peak...

Open the catalog to page 5

Conductive Polymer Aluminum Electrolytic Capacitors 2. Mounting 2.1 When mounting (1) Check the SP-Cap ratings (capacitance and voltage) before mounting. (2) Check the SP-Cap polarity before mounting. (3) Check the land size for the SP-Cap before mounting. (4) When using a mounter, if the pressure for mounting is too high, then the current leak may increase, shortcircuiting may occur, or the SP-Cap may break down or come off. 2.2 Soldering (1) Reflow soldering Be performed by one of following methods. (a) Ambient heat conduction reflow (IR / Hot-air) Please refer to the page of “Mounting...

Open the catalog to page 6

Conductive Polymer Aluminum Electrolytic Capacitors 4. Storage SP-Cap should be stored in a moisture proof environment. Storage conditions before and after opening the moisture proof packaging as follows. (If these conditions are exceeded, the package may absorb moisture and there is a risk of damage to the exterior due to heat stress during mounting.) 【Environment of Storage】 Temperature ：5 ℃ to 30 ℃ Humidity ：Less than 70 % Maximum storage term before opening the package ：2 years after manufactured Maximum storage condition after opening the package ：7 days after opening SP-Cap should be...

Open the catalog to page 7

Conductive Polymer Aluminum Electrolytic Capacitors Low profile Low ESR Low ESL High voltage High temp. Rated temperature voltage (℃) (V) Super low ESR High ripple current Super low ESR High ripple current Height 3.0 ｍｍ max.

Open the catalog to page 8

Conductive Polymer Aluminum Electrolytic Capacitors

Open the catalog to page 9

Conductive Polymer Aluminum Electrolytic Capacitors Mounting specification ● Recommendable reflow soldering Temperature on the surface of capacitor(℃) Peak temperature 260℃ 10 s max. Soldering Soldering temperature and soldering time Temperature Time ≧ 255℃ 30 s max. ≧ 230℃ 130 s max. ≧ 217℃ 150 s max. SP-Cap recommended profile condition of the IPC/J-STD-020D standard ● Typical land pattern □ 2-terminals For standard terminal（C＊, S＊, G＊, HX series） 8.8 〈VIA〉　 For low ESL terminal（L＊, GX-L series）

Open the catalog to page 11

Conductive Polymer Aluminum Electrolytic Capacitors Packaging specifications ● Reel dimensions ● Embossed taping Tape running direction Chip pocket Upper row : Product height / Lower berth : t ● Packaging box dimensions Reel ø330 ø180

Open the catalog to page 12

Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type CS,CT,CX series ・2 to 6.3 V : On sale ・ 10 to 35 V : Not recommended for new design ※ Click Features ● High voltage (35 V max.) ● Low profile (Height 1.0 mm max.) ● High ripple current (5600 mA rms max.) ● RoHS compliance, Halogen free Specifications Series Category temp. range Rated voltage range Capacitance tolerance Rated voltage × 1.25 [2.0 V to 16 V], × 1.15 [20 V to 35 V]　 (15 ℃ to 35 ℃) +105 ℃ 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Dissipation factor (tan δ) ≦ 2 times of...

Open the catalog to page 13

Conductive Polymer Aluminum Electrolytic Capacitors Characteristics list ■ 2.0 V to 6.3 V Series Part number *1: Ripple current（100 kHz / +45 ℃） *2: ESR（100 kHz / +20 ℃）　 *3: Please contact us when 500 pcs packing is necessary. ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Temperature coefficient of ripple current Temperature 2.0 V to 6.3 V ◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature. Design and specifications are each subject to change without notice. Ask factory...

Open the catalog to page 14

Conductive Polymer Aluminum Electrolytic Capacitors Characteristics list ■ 10 V to 35 V Series Not Recommended for New Design Case size (mm) Part number *1: Ripple current（100 kHz / +45 ℃） *2: ESR（100 kHz / +20 ℃）　 *3: Please contact us when 500 pcs packing is necessary. ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Temperature coefficient of ripple current Temperature 10 V to 35 V ◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature. Design and specifications are each...

Open the catalog to page 15

SP-Cap 32Pages

Catalog excerpts

All Panasonic Electric Works Corporation of America catalogs and technical brochures

SP-Cap
32Pages