cad

lh2h-catalog
8Pages

{{requestButtons}}

Catalog excerpts

lh2h-catalog - 1

DIN HALF SIZE HOUR METER Features 5. Battery Replacement Easy on Environment To replace battery simply remove body for the one-touch installation type, and remove battery lid for the installation frame type. 6. Screw Terminals Designed for Safety Built in nger protection. 7. Panel Covers Replacable (Standard color is ash gray.) Change the panel design by replacing with a black panel cover. 8. Conforms to IP66 Protective Construction (Only installation frame type.) (Front panel surface) 9. Input Methods 1) Non-voltage input method 2) Voltage input method 3) Free voltage input method 10. Backlight Type Added to Series and Now 2-color Switchable (green/ red) Easy viewing even in dark places and switchable between green and red (Voltage input type). 11. Compliant with UL, c-UL and CE marking. 1. 8.7 mm Character Height (previously 7 mm .343 inch) Easy-to-read character height increased from 7 mm to 8.7 mm .276 inch to .343 inch. Panel mounting type One-touch installation type Panel mounting type Installation frame type 3. Select by switch between two time ranges in a single meter. 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable 4. Panel Mounting Type Features 2 Installation Methods Comes with very easy one-touch installation type and also installation frame type that uses the frame on the timer/counter. Choose a method that suits the application. PC board mounting type RoHS Directive compatibility information http://www.nais-e.com/ Product chart Type Installation type Panel mounting type Non-voltage input type Standard type Voltage input type (4.5 to 30 V DC) Free voltage input type (24 to 240 V AC/DC) Backlight type Voltage input type (4.5 to 30 V DC) One-touch installation type Installation frame type PC board mounting type Product types 1. Panel mounting type 1) One-touch installation type 1 Standard type No. digits Measurement time range 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable Front reset Input method Non-voltage input type Voltage input type (4.5 to 30 V DC) Free voltage input type (24 to 240 V AC/DC) All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

Open the catalog to page 1
lh2h-catalog - 2

LH2H 2 Backlight type No. digits 7 digits Measurement time range 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable Input method Voltage input type (4.5 to 30 V DC) 2) Installation frame type 1 Standard type No. digits Measurement time range 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable 0 to 999999.9h/0 to 3999d23.9h switchable 0 to 999h59m59s/0 to 9999h59.9m switchable Front reset Input method Non-voltage input type Voltage input type...

Open the catalog to page 2
lh2h-catalog - 3

LH2H 2. PC board mounting type Type Item Input method No. digits Rated operation voltage Allowable operation voltage range Current consumption Measurement time range Min. input signal width Input method Start input Input impedance Reset input Residual voltage Min. input signal width Input method Input impedance Residual power Break down voltage (initial) Insulation resistance (initial) PC board mounting type Non DC voltage input 7 digits 3 V DC 2.7 to 3.3 V DC Max. 20 µA (max. 200 µA during reset input) 0 to 999999.9h 0 to 9999h59.9m 200 ms Non-voltage input using contacts or open collector...

Open the catalog to page 3
lh2h-catalog - 4

LH2H Part names 1. Front reset button Reset the elapsed time. It does not work when the lock switch is ON. Be aware that battery life will decrease if this switch is used frequently. 2. Lock switch (Refer to chart on right.) Disable the front reset button. HOUR METER Time range switch Front reset button Time unit seal Lock switch Note) Turn ON at the LCD side (reset disabled) and OFF at the terminal block side (reset enabled). 3. Time range switch (See chart on right). Switch the time range. Note) Always press the front reset button when operating the time range switch. (Terminal block...

Open the catalog to page 4
lh2h-catalog - 5

LH2H 2) Installation frame type • Panel mounting diagram 44.8 1.764 Mounting frame ATH3803 (included) Mounting screws (found on mounting bracket) Rubber gasket ATH3804 (included) HOUR METER Reset button • Panel cut-out dimensions • For connected installation (sealed installation) (Only installation frame type.) The standard panel cut-out is shown below. Use the mounting frame (ATH3803) and the rubber packing (ATH3804). (Only installation frame type.) Notes) 1. Suitable installation panel thickness is 1 to 4.5 mm .039 to .177 inch. 2. Waterproong will be lost when installing repeatedly...

Open the catalog to page 5
lh2h-catalog - 6

LH2H General tolerance: ±1.0 ±.039 mm inch 2. PC board mounting type • External dimensions PC board pattern (BOTTOM VIEW) Mounting area 15.24 Connection sockets .600 28 pin DIP terminal Note: The AXS212811K is recommended as a compatible connection socket. • Terminal layout and wiring diagrams 15 17 Start input Reset input Q-E, }-w, e-t and S-F are connected internally. An external power supply is required. Input method 1. Standard type Non-voltage input type Panel mounting type Contact input Start input PC board mounting type Transistor input Contact input NPN transistor Transistor input...

Open the catalog to page 6
lh2h-catalog - 7

LH2H 2. Backlight type Voltage input type Transistor input Contact input Start input Backlight connection PNP transistor Start input Reset input Start input Reset input Notes) 1. Do not reverse the polarities when connecting the DC voltage for the backlight. 2. 2 and 4. (The input and reset circuits are functionally insulated.) 3. When using transistor (Tr) input, use the right as a guide. (Collector withstand voltage Q 50 V, leakage current < 1 µA) 4. Be aware that the application of voltage that exceeds the voltage range of the H level to the count input terminal, and the application of...

Open the catalog to page 7

All Panasonic Electric Works Corporation of America catalogs and technical brochures

  1. SP-Cap

    32 Pages

  2. TQC series

    7 Pages

  3. ZF-A series

    9 Pages

  4. ZC-A series

    9 Pages

  5. PAN1780‑AT

    37 Pages

  6. LD-P RELAYS

    8 Pages

  7. ERJH2CF1R33X

    7 Pages

  8. ZKU series

    9 Pages

  9. LQ RELAYS

    9 Pages

  10. SF-M RELAYS

    8 Pages

  11. PhotoMOS HF

    14 Pages

  12. ZU series

    9 Pages

  13. ZSU series

    9 Pages

  14. ZSU-A series

    9 Pages

  15. PAN1781

    23 Pages

  16. PAN9520 ETU

    35 Pages

  17. PAN9520

    36 Pages

  18. HE-V RELAYS

    5 Pages

  19. PAN1026A

    2 Pages

  20. DP3 Catalog

    14 Pages

  21. AQ-K Catalog

    3 Pages

  22. AQ-F Catalog

    5 Pages

  23. ABS Catalog

    11 Pages

  24. A4F Catalog

    9 Pages

  25. EX-L200 series

    12 Pages

  26. LP-400 series

    16 Pages

  27. HL-G1 Series

    16 Pages

  28. A35S Catalog

    8 Pages

  29. a4-catalog

    175 Pages

  30. e-catalog

    81 Pages

  31. kw-catalog

    28 Pages

  32. kt-catalog

    16 Pages

  33. hl-azh-catalog

    15 Pages

  34. lt4h-catalog

    16 Pages

  35. pm5s-catalog

    7 Pages

  36. pmh-catalog

    7 Pages

  37. pv310-catalog

    12 Pages

  38. S1DXM

    30 Pages

  39. SF4B-G

    6 Pages

  40. TH (Sensor)

    16 Pages

  41. UJ20

    11 Pages

  42. VL-T

    19 Pages

  43. LP-S500W

    12 Pages

  44. HL (AZH)

    30 Pages

  45. GT21C

    24 Pages

  46. FX-500

    20 Pages

  47. FM-200

    12 Pages

  48. EQ-500

    12 Pages

  49. DPC-DPH 100

    22 Pages

  50. DL (AZD1)

    23 Pages

  51. Lighting

    43 Pages

  52. AX40

    12 Pages

  53. VIC100

    6 Pages

  54. KW Catalog

    17 Pages

  55. LH2H Catalog

    29 Pages

  56. LCH Catalog

    34 Pages

  57. KT Catalog

    20 Pages

  58. AZ5 Catalog

    22 Pages

  59. LT4H Catalog

    39 Pages

  60. GN Catalog

    10 Pages