cad

EX-L200 series - 12 Pages

Add to MyDirectIndustry favorites
EX-L200 series

Catalog excerpts

Amplier Built-in ULTRA-COMPACT LASER SENSOR EX-L200 SERIES FDA world smallest* Self-Contained High Precision Laser Sensor * Based on research conducted by our company as of January 2012

 Open the catalog to page 1

Introducing world smallest* amplier built-in laser sensor Due to the customized IC and optical design, high precision detection is fullled in a world smallest size with directivity and visibility achievable only by laser. The laser adopted is Class 1 (JIS / IEC / FDA) laser that is safe to use, so that there is no need to separate the areas of sensor usage. * Based on research conducted by our company as of January 2012 General-purpose photoelectric sensor Thru-beam type (EX-L211, EX-L212) Minute object detection type (EX-L211) The beam is purposely widened to have a lower beam density and...

 Open the catalog to page 2

Minute object detection type (EX-L211, EX-L221) Highly accurate detection ● Suitable for positioning and minute object detection A repeatability of 0.02 mm 0.0008 in or less at a range of from 100 to 200 mm 3.937 to 7.874 in makes this type best suitable for positioning applications (EX-L221). Moreover, it boasts a top-class detection precision in the compact laser sensor category with the gold wire of ø0.01 mm ø0.0004 in. Repeatabillty (Typical) Model No. Minimum sensing object (Minute object detection type) (Typical) EX-L211 (Thru-beam type) EX-L221 (Reective type) ø0.01 mm ø0.0004 in...

 Open the catalog to page 3

Other Features Same mounting pitch as ultra-compact photoelectric sensor Strong against water and dust with protection structure IP67 Same mounting pitch as ultra-compact photoelectric sensor EX-20 series Mounting pitch* EX-L200 series * Thru-beam type: 13 mm 0.512 in Reective type: 16 mm 0.630 in EX-L200 series has the same mounting pitch as ultra-compact photoelectric sensor EX-20 series so that the time taken in designing is saved. The sensor can be used even in environment where water or dust present because of its protection structure IP67. Safe Class 1 Lasers This sensor incorporating...

 Open the catalog to page 4

Laser is applicable for various usages. Detecting ICs that are out of position in multiple palettes Conrming arrival of substrate Detecting objects from an opening Detecting tip of very thin pipe Checking protrusion of wafer Determining electric parts position Detecting processed holes Detecting chip components Detecting O-ring Checking protrusion of tray in storage Determining cutting position of sheet Sensing unevenly-colored workpieces Sensing only the top 0.3 mm 0.012 in thick PCB Sensing glossy or curved-surface workpiece, such as metallic pipes

 Open the catalog to page 5

EX-L200 ORDER GUIDE Appearance Long sensing range Emission spot size (Typical) Sensitivity adjuster Approx. 6 × 4 mm 0.236 × 0.157 in (at a sensing distance of 1 m 3.281 ft) Approx. 8 × 5.5 mm 0.315 × 0.217 in (at a sensing distance of 1 m 3.281 ft) Approx. 6 × 4 mm 0.236 × 0.157 in (at a sensing distance of 1 m 3.281 ft) ø1 mm ø0.039 in or less (at a sensing distance of 300 mm 11.811 in) ø1 mm ø0.039 in or less (at a sensing distance of 50 mm 1.969 in) Approx. 1 × 5 mm 0.039 × 0.197 in (at a sensing distance of 50 mm 1.969 in) Long sensing range Minute object detection Convergent reective...

 Open the catalog to page 6

Spot reective Convergent reective Minute object detection Long sensing range Long sensing range Minute object detection Line spot Sensing range 45 to 300 mm 20 to 50 mm 0.787 to 1.969 in 20 to 70 mm 0.787 to 2.756 in 4 m 13.123 ft (Note 2) 1.772 to 11.811 in (Note 3) (Convergent point: 22 mm 0.866 in) (Note 3) (Convergent point: 22 mm 0.866 in) (Note 3) Emission spot size (Typical) Approx. 6 × 4 mm 0.236 × 0.157 in Approx. 8 × 5.5 mm 0.315 × 0.217 in Approx. 6 × 4 mm 0.236 × 0.157 in Approx. 5 × 1 mm 0.197 × 0.039 in ø1 mm ø0.039 in or less ø1 mm ø0.039 in (vertical × horizontal) (vertical...

 Open the catalog to page 7

EX-L200 OPTIONS Sensor mounting bracket Model No. Sensor mounting bracket It can adjust the height and the angle of the sensor. (The thru-beam type sensor needs two brackets.) Polarizing lter Polarizing lter for retroreective type Stabilizes sensitivity of the reective surface. For retroreective type EX-L291□ Sensing range: 1.8 m 5.906 in (Note) Foot angled mounting bracket (The thru-beam type sensor needs two brackets.) Universal sensor mounting bracket Universal sensor mounting bracket Reector mounting bracket Height adjustment: 15 mm 0.591 in Material: Stainless steel (SUS304) Two M3...

 Open the catalog to page 8

EX-L200 SENSING CHARACTERISTICS (TYPICAL) EX-L291□ Retroreective type Parallel deviation • Horizontal direction Angular deviation • Horizontal direction • Vertical direction • Vertical direction Sensor angular deviation Reflector angular deviation Sensor angular deviation Reflector angular deviation Reflector (RF-330) Reflector (RF-330) Sensor angular deviation The sensing region (typical) is represented by oblique lines in the left gure. However, the sensitivity should be set with an enough margin because of slight variation in products. Correlation between lightness and sensing range...

 Open the catalog to page 9

EX-L200 SENSING CHARACTERISTICS (TYPICAL) EX-L262□ Convergent reective Sensing eld • Horizontal (left and right) direction • Vertical (up and down) direction Max. sensitivity Max. sensitivity Setting distance L (mm in) 100 × 100 mm 3.937 × 3.937 in White non-glossy paper 1 0 1 2 0.039 0.039 0.079 Left Center Right Operating point (mm in) 5 0 5 0.197 0.197 Down Center Up Operating point (mm in) Lightness shown on the left may differ slightly from the actual object condition. Distance to convergent point Correlation between material and sensing range (face-to-face) Normal sensitivity sensing...

 Open the catalog to page 10

The CAD data in the dimensions can be downloaded from our wedside. Stability indicator (Green) Sensitivity adjuster Operation indicator (Orange) Receiving part Receiving part Sensitivity adjuster Operation indicator (Orange) 2.5 0.098 Stability indicator (Green) 6.4 0.252 Emitting part ø3.7 ø0.146 cable, 2 m 6.562 ft long 4-core × 0.15 mm2 insulator dimeter: ø1.0 mm ø0.004 in Sensor Sensitivity adjuster Operation indicator (Orange) Emitting part Stability indicator (Green) 8.6 0.339 Receiving part Assembly dimensions with polarizing lter (PF-EXL2-1) Mounting drawing with EX-L291(-P)...

 Open the catalog to page 11

All Panasonic Electric Works Corporation of America catalogs and technical brochures

  1. Energy Solutions

    15 Pages

  2. HE-V RELAYS

    5 Pages

  3. PAN1026A

    2 Pages

  4. DP3 Catalog

    14 Pages

  5. AQ-K Catalog

    3 Pages

  6. AQ-F Catalog

    5 Pages

  7. ABS Catalog

    11 Pages

  8. A4F Catalog

    9 Pages

  9. LP-400 series

    16 Pages

  10. HL-G1 Series

    16 Pages

  11. A35S Catalog

    8 Pages

  12. a4-catalog

    175 Pages

  13. e-catalog

    81 Pages

  14. kw-catalog

    28 Pages

  15. th-meter-catalog

    18 Pages

  16. lh2h-catalog

    8 Pages

  17. kt-catalog

    16 Pages

  18. hl-azh-catalog

    15 Pages

  19. ql-az4-catalog

    6 Pages

  20. vl-az8-catalog

    8 Pages

  21. lt4h-catalog

    16 Pages

  22. pm5s-catalog

    7 Pages

  23. pmh-catalog

    7 Pages

  24. pv310-catalog

    12 Pages

  25. S1DXM

    30 Pages

  26. SF4B-G

    6 Pages

  27. TH (Sensor)

    16 Pages

  28. UJ20

    11 Pages

  29. VL-T

    19 Pages

  30. LightPix AE20

    8 Pages

  31. LP-S500W

    12 Pages

  32. HL (AZH)

    30 Pages

  33. GT21C

    24 Pages

  34. FX-500

    20 Pages

  35. FM-200

    12 Pages

  36. EQ-500

    12 Pages

  37. DPC-DPH 100

    22 Pages

  38. DL (AZD1)

    23 Pages

  39. Lighting

    43 Pages

  40. AX40

    12 Pages

  41. VIC100

    6 Pages

  42. CX-400 Version 2

    24 Pages

  43. KW Catalog

    17 Pages

  44. LH2H Catalog

    29 Pages

  45. LCH Catalog

    34 Pages

  46. KT Catalog

    20 Pages

  47. AZ5 Catalog

    22 Pages

  48. LT4H Catalog

    39 Pages

  49. A100/200 Catalog

    26 Pages

  50. UJ30/35 Catalog

    12 Pages

  51. LP-F10 Catalog

    4 Pages

  52. LP-200 Catalog

    6 Pages

  53. NA1-11 Catalog

    8 Pages

  54. GN Catalog

    10 Pages