Catalogs >
Panasonic Electric Works Corporation of America >
ERJH2CF1R33X

ERJH2CF1R33X
7Pages

Catalog excerpts

High Temperature Thick Film Chip Resistor (Automotive Grade) ERJH type ERJ H2G, H2C, H2R, H3G series ERJ H3E, H3Q, H6G, HP6 series Features ● ● ● ● ● ● ● High reliability : Metal glaze thick film resistive element and high temperature of electrodes structure Achieve maximum category temperature 175 ℃ and rated category temperature 105 ℃ Compatible with placement machines : Taping packaging available Suitable for both reflow and flow soldering Reference standard : IEC 60115-8，JIS C 5201-8，JEITA RC-2134C AEC-Q200 compliant RoHS compliant ■ As for packaging methods, land pattern, soldering conditions and safety precautions, please see data files. Product code Size, Power rating Thick film chip resistors Code inch Power rating Resistance tolerance Code Resistance value Packaging methods Code Punched Carrier Taping 2 mm pitch, 10,000 pcs The ﬁrst two or three digits are signiﬁcant ﬁgures of resistance and the third or fourth one denotes number of zeros following. Three digit type (±5 %), Four digit type (±1 %, ±0.5 %) （Ex.) 222 : 2.2 kΩ 1002 : 10 KΩ 　　　　 4R7 : 4.7 Ω Punched Carrier Taping 4 mm pitch, 5,000 pcs Product code Size, Rated current Thick film chip resistors Code inch Rated current H2G 0402 Resistance tolerance Code Resistance value Jumper is expressed by R00. Packaging methods Code Punched carrier taping 2 mm pitch, 10,000 pcs Punched carrier taping 4 mm pitch, 5,000 pcs Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure

Open the catalog to page 1

High Temperature Thick Film Chip Resistor (Automotive Grade) Limiting element Maximum overload (inch size) Category temperature range (℃) Resistance tolerance (%) *1: Use it on the condition that the case temperature is below the upper category temperature. *2: Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value, or Limiting Element Voltage listed above, whichever less. *3: Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less....

Open the catalog to page 2

High Temperature Thick Film Chip Resistor (Automotive Grade) Mass (Weight) Performance Test item Test conditions Resistor type Jumper type Within specified tolerance Resistance to soldering heat Rapid change of temperature High temperature exposure Damp heat, Steady state Load life in humidity 85 ℃, 85 %RH, Rated voltage (Jumper type : Rated current), 1.5 h ON / 0.5 h OFF cycle, 1000 h 105 ℃, Rated voltage (Jumper type : Rated current), 1.5 h ON / 0.5 h OFF cycle, 1000 h Design and specifications are each subject to change without notice. Ask factory for the current technical specifications...

Open the catalog to page 3

Fixed Resistors Safety Precautions (Common precautions for Fixed Resistors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products under the actual...

Open the catalog to page 5

Fixed Resistors • Do not reuse any products after removal from mounting boards. • Do not drop these products. If these products are dropped, do not use them. Such products may have received mechanical or electrical damage. • If any doubt or concern to the safety on these products arise, make sure to inform us immediately and conduct technical examinations at your side. The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5...

Open the catalog to page 6

Surface Mount Resistors Safety Precautions (Common precautions for Surface Mount Resistors) The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors in this catalog. 1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the resistors) so as not to damage their electrodes and protective coatings. Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur. Keep the rated power and ambient temperature within the specified derating...

Open the catalog to page 7

ERJH2CF1R33X 7Pages

Catalog excerpts

All Panasonic Electric Works Corporation of America catalogs and technical brochures

ERJH2CF1R33X
7Pages