WJ-PR204/WJ-PR201/WJ-PC200
3Pages

4-channel receiver side unit 1-channel receiver side unit WJ-PR204/WJ-PR204E WJ-PR201/WJ-PR201E Camera side unit WJ-PC200/WJ-PC200E (Indoor use only) Easy migration from analog to IP system with existing coaxial cable Key Features Two models (4-channel and 1-channel) are provided on the receiver side Up to 4 network cameras can be connected and used on a single receiver side unit.(WJ-PR204) Power over Ethernet Plus (PoE+) ready The coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) and PoE+ cameras can be connected and used*1. Use over long distances (WJ-PR201) The coaxial - LAN converter can be used for distances of up to 300 m (984 feet) for PoE+ connections and 500 m (1,640 feet) for PoE connections, and 2.0 km (6,560 feet) for non-PoE+ connections. (When used with RG-6/U coaxial cable, and the loop resistance is below 4 W/100 m {328 feet} without additional joint parts.) High-speed transmission The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections*2. (When used with RG-6/U coaxial cable, and for distances under 2.0 km (6,560 feet) <PR201>, 500 m (1,640 feet) <PR204> ) No setup required Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter. *1 There are limitations on the combinations of the cameras to be connected, the type of power supply and transmission range to the receiver side units. For more detail please see the operating instructions on our website( http://security.panasonic.com/pss/security/support/ ). *2 Transmission speed is the speed of transmission between the receiver side unit and the camera side unit. Values may vary depending on the condition of the coaxial cable (for example, as the cable deteriorates overtime), network conditions, etc. System Example Standard Accessories • Screw (M2.6 x 10 mm {3/8 inches}) 2 pcs. of them, 1 for spare. • Cable coupler (used with the network cable) • • 1 pc. • 3 pcs. of them, 1 for spare. • 2 pcs. of them, 1 for spare.2 pcs. • 1 pc. • 1 pc. *1 UK and other types of AC cords are included. *2 BNC Connector Cover cap will be shipped with attached to the BNC connector cover of 4ch. Optional Accessory Rack Mount Connecting Fitting BY-HCA10A (for mounting three or four Receiver side unit) - For U.S. and Canada : BY-HCA10A - For Europe and other countries : BY-HCA10CE • Underside Continuous Connecting Bracket • • Screw (Flat-head M3 x 6 mm{1/4 inches}) • • Screw (M3 x 6 mm{1/4 inches}) Coaxial cable PoE power receiving or connection to the AC adapter WJ-PR204 WJ-PC200 Camera side unit

Receiver side unit Coaxial Interface Connection Specifications * 1 There are restrictions regarding combining cameras. For more detail please see the operating instructions on our website. ( http://security.panasonic.com/pss/security/support/ ) Maintenance Screen Specifications Camera side unit 1 For information about network cameras recommended by Panasonic, visit our web site. ( http://security.panasonic.com/pss/security/support/info.html ) *2 Use a PoE camera that consumes no more than 6.5 W. *3 When connecting a PoE camera or PoE+ camera to an external power supply, make sure to use the...

Part Names and Functions WJ-PR201/WJ-PR204 (connects to the network device) 1 2 BNC connector Network connector COAXIAL Indicator Power Indicator Front View Rear View Network connector Rear View WJ-PC200 (connects to the camera) Front View LINK Indicator Network connector Used when attaching the camera side unit to a ceiling or wall with screws. 76(3") Trademarks and registered trademarks – Microsoft, Windows, Windows Vista, Windows Media, Internet Explorer, and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. –...