Aluminum oxide moisture probe Panametrics aluminum oxide moisture probes have set the standard of performance and value in industrial moisture measurement for more than 40 years. In use, M Series moisture probes are coupled to Panametrics hygrometer consoles by an interconnecting cable. Ease of use, wide measurement range and rigorous calibration standards make these systems the preferred choice for industrial moisture measurement worldwide. PANA084DS Rev. 7

M Series Datasheet I PANAMETRICS Film thickness of the oxide layer is critical to the performance of this type of sensor. Panametrics manufactures sensors with an oxide film thickness that causes them to exhibit true absolute humidity, rather than relative humidity response. This critical film thickness also gives the M Series probe quick response and exceptional calibration stability. Each Panametrics aluminum oxide sensor is individually calibrated in one of the world's most advanced moisture calibration facilities. Developed over several decades, this facility uses flow, temperature and pressure...

Dew/frost point Nonlinear negative temperature coefficient (NTC) thermistor (resultant temperature linearized by microprocessor) Intrinsic safety Intrinsically safe when connected to a Panametrics Moisture Series analyzer, PM880 portable hygrometer or intrinsically safe barriers in accordance with the user's manual. M Series moisture probe: © II 1 G EEx ia IIC T4 (-20°C to +80°C), and CSA C US Class I, Division 1, Groups A,B,C&D T4, LR44204-23 Complies with EMC Directive 2014/30/EU and PED 2014/68/EU for DN<25 Aluminum oxide moisture sensor Each probe is individually computer calibrated against...