PanaFlow™ XMT1000 Datasheet
4Pages

Panametrics liquid flow ultrasonic transmitter The XMT1000 is a new, cost-effective ultrasonic flow transmitter that builds on Panametrics flow expertise and on years of reliable performance from its XMT868i predecessor. It offers state-of-the-art flow measurement capability in a rugged, locally-mounted or remote-mounted transmitter certified for use in hazardous areas. It brings a new level of performance with improved accuracy, configurable inputs and outputs, and multiple ultrasonic transducer path options. Non-intrusive, reliable, and accurate flow measurement Liquid flow measurements for a wide range of applications • Crude oil Its on-board digital signal processor (DSP) provides proprietary digital signal coding and correlation detection routines, automatic adjustment to changing fluid properties, and dynamically-configured operating software to simplify programming. • Improved accuracy of 0.3% of reading • Four configurable inputs/outputs for analog or digital communication • Hydrocarbon liquids • Water and wastewater • Distilled water • Hot/chilled water • Chemicals • Beverages The PanaFlow XMT1000 comes from a long line of proven ultrasonic flow meters from Panametrics. It shares all the advantages of ultrasonic flow measurement no moving parts to wear, no filters or strainers, no maintenance requirement, no pressure drop, and no drifting or required periodic calibration. • Suitability for a wide rang

Improved programming capability The XMT1000 introduces a magnetic six-button keypad to allow safe programming and diagnostics verification in your hazardous (classified) location. There is no need to open the case to use a PC to program, eliminating the cost and time associated with obtaining hot work permits, and there is no need for an additional handheld programmer. Just touch the glass of the XMT1000 with the magnetic wand to change any parameter setting. If you prefer your PC interface, the PanaFlow XMT1000 comes standard with MODBUS RS485 connectivity, providing full access to the...

XMT1000 specifications Operation and performance Fluid types Acoustically conductive fluids, including most clean liquids, and many liquids with entrained solids or gas bubbles. Maximum void fraction depends on transducer, interrogation carrier frequency, path length and pipe configuration. Powder coated aluminum (copper free) or stainless steel Transducer types All liquid wetted transducers Pipe sizes Standard: 1 in. to 76 in. (25 mm to 1930 mm) Optional: >76 in. (1930 mm), consult factory Data logging Storage standard on meter, up to 10,000 flow data points with up to 26 parameters per...

PanaFlow XMT1000 part number XMT1000 (Description) Model: XMT1000 liquid ultrasonic flow meter Paths: Single path with MCX connectors Two or three path with MCX connectors Single path with flying leads Dual path with flying leads Power: 100-20 VAC power supply 12-28 VDC power supply Conformal coating: No conformal coating Conformal coating Enclosure: Powder coated aluminum enclosure 316/316L stainless steel enclosure Input/output: 4 to 20 mA isolated output, one additional output (pulse or frequency output) Certifications: US/Canada Class I, Division 1, Group B, C, D T6 Ta = -40°C to +60°C...