Valve Manifolds Maximum Working Pressure upto 10000 psi (689 bar)

Introduction PANAM has emerged as renowned name in global market for 'Instrumentation Fittings & Valves'. Since its inception in 1998 to present day, PANAM has added new product every year and has broadened its product portfolio and its clientele base by supplying to potential customers worldwide. Key core values like Timely Delivery, Quality Consistency, Product Improvisation and After Sales Service has been instrumental in the phase wise evolution of company. Continuous improvement is the key to success, Customer feedback are taken with positive attitude and product are constantly groomed to...

PANAM® Valve Manifolds are designed for connecting the gauges (pressure gauges, etc) to process lines in hazardous and corrosion media under pressure of 10000 psi (689 bar). They are designed for easy block, bleed of pressure during maintenance and calibration of pressure transmitters or gauges. They are ruggedly manufactured and precision machined to the most exacting dimensional tolerance to ensure perfect installation and application. Valve Manifolds are available in SS 316, CS, Monel 400, Hastalloy C276, Inconel 625, Inconel 825, Duplex and Superduplex. Valve Manifolds have high durability,...

Non-Rotating V Tip Non-Rotating Ball Tip Soft Seat - Large Bore Part Qty. Material

Sealing Material CharacteristicsPTFE (Polytetrafluorethylene) PTFE is an excellent material for applications in clean environments. • It is highly resistant to the chemical effects of many organic and inorganic reagents and solvents. • It has a low coefficient of deformation, increased strength and abrasion resistance, and a low friction coefficient • high resistance to chemical attack and low temperatures • Very low moisture absorption, resistance to hydrolysis and hot steam, ability to maintain strength and flexibility at low temperatures (operating temperature range -60°C to + 149°C (-76°F...

Flange Connections - Manifold to Transmitter DIN EN 61518 / IEC 61518 Type A and Type B / MSS SP99 Testing Each Valve is hydrostatically tested in accordance with MSS-SP-99. This procedure includes testing of the body cavity and spindle leaks. Other tests like Vibration, Temperature, Helium are available upon request. Hydrostatic test is performed with pure water or other liquids of similar or lower viscosity at 1.5 times and seat leakage test at 1.1 times of the maximum working pressure. Each valve is also tested with Nitrogen Gas at 6.9 MPa (1000 psi) for seat, seal, and shell leakage. Safety...

2-Way Manifolds Standard Body - Pipe to Pipe 2 Valve Manifold Pipe to Pipe design has one block and bleed valve. It can be with pipe connection or PANAM compression fitting. ® This type of manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge.

2-Way Manifolds Standard Body - Pipe to Flange 2-Valve Manifold consists of one block valve and one bleed valve. It can be with threaded end connection or PANAM compression fitting for connection to the process line, It has a flanged end for instrument connection. ® This manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge.

2-Way Manifolds Standard Body - Flange to Flange 2-Valve Manifold consists of one block valve and one bleed valve. It has a flanged end for process connection and a flanged end for instrument connection. This manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge. Connection with measuring instrument

2-Way Manifolds Standard Body - Pipe to Pipe, Base Mounting 2-Valve Manifold consists of one block valve and one bleed valve. It can be with threaded end connection or PANAM compression fitting. ® This manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge. Vent 1/4" NPT (Vent Plug Optional) Vent 1/4" NPT (Vent Plug Optional)

2-Way Manifolds Standard Body - Pipe to Pipe, Base Vent 2-Valve Manifold consists of one block valve and one bleed valve. It can be with threaded end connection or PANAM compression fitting. ® This manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge.

2-Way Manifolds Standard Body - Pipe to Flange, Direct Mounting 2-Valve Manifold consists of one block valve and one bleed valve. It can be with threaded end connection or PANAM compression fitting for connection to the process line, It has a flanged end for instrument connection. ® This manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge.

Ordering Information for 2-Way Manifolds with Standard Body Material SS - Stainless Steel 316 SDSS Connection Size 4 - 1/4” NPT 4R - 1/4” BSPT 20MM - External Thread M20x1.5 / Flange 20MSWL - M20x1.5 with Swivel Nut 4GSWL - 1/4” BSPP with Swivel Nut 8GSWL - 1/2” BSPP with Swivel Nut 08 - 1/2” PANAM ® Tube Fitting Connection Type - - Female Thread (Standard) MF - Male/Female MM - Male Thread FM - Female/Male OD - PANAM " Tube Fitting Mounting BM - Pipe to Pipe (Base Mounting) BV - Pipe to Pipe (Base Vent) R - Standard Body - Pipe to Pipe T - Standard Body - Pipe to Flange * H - Standard Body -...

2-Way Manifolds Space Saving Body - Pipe to Pipe, Remote Mounting 2-Way Manifold has a space saving body and consists of one bleed and one block valve. It can be with threaded end connection or PANAM compression fitting connection for process and instrument. ® This manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge.

2-Way Manifolds Space Saving Body - Pipe to Pipe, Remote Mounting 2-Way Manifold has a space saving body and consists of one bleed and one block valve. It can be with threaded end connection or PANAM compression fitting connection for process and instrument. ® This manifold allows for easy block, bleed and calibration of a static pressure transmitter or gauge.