Tube Fittings Maximum Working Pressure upto 10000 psi (689 bar).

Introduction PANAM has emerged as renowned name in Global market for 'Instrumentation Fittings & Valves'. Since its ® inception in 1998 to present day, PANAM has added new product every year and has broadened its product portfolio and its clientele base by supplying to potential customers worldwide. Key core values like Timely Delivery, Quality Consistency, Product Improvisation and after sales service has been instrumental in the phase wise evolution of company. Continuous improvement is the key to success, Customer feedback are taken with positive attitude and product are constantly groomed...

Metric Tube x ISO Parallel Threads Tube Plug - PTP Imperial Tube Tube Cap - PTC Metric Tube Front Ferrule - PFF Imperial Tube Metric Tube Pipe Insert - PIN Imperial Tube Metric Tube Other Products

Features • Easy to install. • Sizes range available from 1/16" to 2" and 2 mm to 50 mm. Diverse materials and configurations are available. • Female nut threads are silver-plated to reduce the friction against the body threads & to prevent galling. • Fittings are easy to disassemble & re-assemble. • Precisely machined components ensure perfect deformation of the ferrules and tubing. • Every fitting is stamped with size, material, and heat code. Function The PANAM tube fitting is a mechanism used both to seal and to grip tubing. The geometry PANAM fitting produces a leak-tight assembly. ® To assemble,...

PANAM ® tube fitting are supplied in various materials to satisfy the needs of various applications including pulp & paper mills, petrochemical, chromatography, on shore& off-shore oil & gas, refinery, analytical instrumentation, steel mill, pharmaceutical, chemical, power generation plants, shipbuilding, and alternative fuels.

Pressure ratings for fittings with both tube fitting and pipe thread ends are determined by the end connection with the lower pressure rating. NPT or ISO/BSP Tapered Threads Pressure Ratings: The table lists pressure ratings for male and female tapered pipe thread ends. For female and male pipe threads to have the same pressure rating in the same nominal pipe size, the female thread would require a heavier wall, resulting in a fitting too large and bulky to be practical. Pressure Ratings for NPT & Iso / BSP Tapered Thread Ends

Pressure Units And Their Ratio: 1 bar = 100 kPa = 14.503 psi 1 kPa = 0.01 bar = 0.145 psi 1 psi = 0.069 bar = 6.89 kPa1 kg/cm2 = 0.98 bar = 14.22 psi

Tube End Dimensional data Inches SIZE STRAIGHT THREAD Millimeters SIZE STRAIGHT THREAD

Allowable working pressures are calculated from an S value of 20,000 psi (137.8 MPa) for ASTM A269 tubing at -20 to 100°F (-28 to 37°C), as listed in ASME B31.3 and ASTM A213 tubing at -20 to 100°F (-28 to 37°C), as listed in ASME B31.1, except as noted. Fractional Seamless Stainless Tubing - Working Pressure in psig Fully annealed austenitic Type 304 or 316 seamless tubing ASTM A269 or ASTM A213, or equivalent. Tubing to be free from scratches, draw mark, dirt, dust, flat spots, and suitable for bending and flaring. Recommended hardness: 80 HRB or less. Safety factor = 4 considering tensile...

Allowable working pressures are calculated from an S value of 137.8 MPa (20,000 psi) for EN ISO 1127 tubing (D4, T4 tolerance for 3 to 12 mm; D4, T3 tolerance 14 to 50 mm) at -28 to 37°C (-20 to 100°F), as listed in AsMe B31.3 and ASTM A213 tubing at -28 to 37°C (-20 to 100°F), as listed in ASME B31.1, except as noted. Metric Seamless Stainless Tubing - Working Pressure in Bar High-quality, fully annealed (Type 304, 304/304L, 316, 316/316L, 317, 317/317L, 321, 347) stainless steel tubing, EN IS01127 or equivalent. Tubing to be free from scratches, draw mark, dirt, dust, flat spots, and suitable...

Fractional Copper Tubing: Allowable working pressures are calculated from an S value of 6,000 psi (41.3 MPa) for ASTM B75 and ASTM B88 tubing at -20 to 100°F (-28 to 37°C), as listed in ASME B31.3 and ASME B31.1. Fractional Copper Tubing - Working Pressure in psig High-quality, soft annealed seamless copper tubing, ASTM B75 and EN 1057 or equivalent. Soft annealed (Temper O)copper water tube, type K or type L to ASTM B88. Safety factor= 5 considering tensile strength to be 30,000 psi at room temperature.

Fractional Alloy 400 Tubing: Allowable working pressures are calculated from an S value of 18,700 psi (128.9 MPa) for ASTM B165 tubing at -20 to 100°F (-28 to 37°C), as listed in ASME B31.3 and ASME B31.1. Fractional Alloy 400 Tubing - Working Pressure in psig High-quality, fully annealed seamless alloy 400 hydraulic tubing, ASTM B165 or equivalent. Tubing to be free of scratches, suitable for bending and flaring.

Allowable working pressures are based on equations from ASME B31.3 and ASME B31.1 for a maximum S value of 20,000 psi (137.8 MPa). Fractional Alloy C-276 Tubing - Working Pressure in psig High-quality, fully annealed, cold drawn 1 temper alloy 600 seamless alloy tubing, ASTm B167 or equivalent. Tubing to be free of scratches, suitable for bending and flaring.

Metric Alloy 600 Tubing: Allowable working pressures are based on equations from ASME B31.3 and ASME B31.1 for a maximum S value of 137.8 MPa (20,000 psi). Metric Alloy 600 Tubing - Working Pressure in Bar High-quality, fully annealed seamless alloy 825 tubing, ASTM B163, AsTm B423, or equivalent. Fully annealed welded alloy 825 tubing, ASTM Bl04, class 1 or equivalent. Tubing to be free of scratches, suitable for bending and flaring.

Metric Alloy 825 Tubing: Allowable working pressures are calculated from an S value of 160.6 MPa (23,300 psi) for ASTM B163 and ASTM B423 seamless tubing at -28 to 37°C (-20 to 100°F), as listed in ASME BPV 2007 Section II, Part D or ASME B31.3. For ASTM B704, Class 1 or equivalent welded and drawn tubing, multiply working pressure by 0.85. Metric Alloy 825 Tubing - Working Pressure in bar High-quality, fully annealed seamless alloy 625 tubing, ASTM B444, Grade 1 or 2, or equivalent. Tubing to be free of scratches, suitable for bending and flaring.