- Catalogs
- Panacol-Elosol
- Structalit® - Maximum Strength Adhesives
Structalit® - Maximum Strength Adhesives
Structalit® - Maximum Strength Adhesives
- Available in single and two-component forms.
- Provide maximum strength for a wide range of materials.
- Applicable in diverse scenarios, including special and high-tech uses.
- Easy to use.
- Multi-purpose functionality.
- Fast curing times.
- Cost-effective solutions.
- Single-Component: Ideal for bonding metal constructions, sheet metalwork, and electronic applications.
- Two-Component: Suitable for large bonded parts that cure at room temperature, including sealants and heat-resistant plastic bonds.
- Single-component adhesives are thermally curing with superior strength.
- Two-component adhesives offer various pot lives and can cure at room temperature.
- High thermal stability and chemical resistance.
- Store at 5 °C and warm to room temperature before use.
- Application methods include putty knife, screen printing, and dispenser.
- Curing requires temperatures above 100 °C, with cure time dependent on workpiece temperature.
- Structalit® 5800 to 5894: Various formulations for specific applications, including glass, plastics, metal bonding, and flexible sealants.
- Structalit® 8801 to 8805: Casting compounds with good chemical resistance and high tensile strength.
- Epoxy resins adhere well to metals, glass, and many plastics.
- Refrigerated storage is required, with a shelf life of at least six months.
Catalog excerpts
honle group adhesives & more Maximum Strength Multi-Purpose Adhesives System Properties • Maximum strength • Wide range of applications
Open the catalog to page 1
Structalit® Multi-Purpose Single and Two-Component Adhesives for Maximum Strength The Structalit® products are one and two-component multi-purpose adhesives that provide maximum strength. Typical Applications Structalit® can also be used in special and high-tech applications, for example in PCB production, where it is used as a black, thermally curing 1-part sealing compound. They are ideal for bonding a wide range of different materials. ● For sheet metalwork, electronic or high-tech applications Single-Component: Bonding Metal Constructions: Two-Component: For Large bonded Parts that have to...
Open the catalog to page 2
Structalit® Structalit® Typical Applications Glass, Plastics, Metal, Multipurpose Sealant for Electronics Glass, Plastics, Metal, Flexible Adhesive and Sealant Metal Adhesive, Bonding Components to Enclosures Ferrite Bonding Flexible Sealant for Large Components Fibre-Optics, Endoscopes 2-part Epoxy with 1-part Epoxy, 2-part Epoxy Hot-Curing with Short Pot Life Long Pot Life 2-part Epoxy, Hotand Cold-Curing Transparent Transparent Transparent Slight Yellow Tint Slight Yellow Tint Viscosity (mPas) Good Adhesion Low Shrinkage, High Temperature, to Plastics, Impact Resistant Chemical and Moisture...
Open the catalog to page 3
Adhesion Epoxy resins have good adhesion to metals, glass and many plastics. For optimal long-term reliability, materials with similar thermal expansion coefficients should be used for large surface area bonds. When curing, epoxies generate heat. In small volumes, the heat may not be significant. However, when used in large potting applications, the epoxies will produce significant amounts of heat. The larger the mass, the higher the temperature. Substrates must be evaluated for heat sensitivity before using epoxies for large volume potting or encapsulating. Storage Packaged epoxies require refrigerated...
Open the catalog to page 4All Panacol-Elosol catalogs and technical brochures
LED Powerline Focus2 Pages
LED Powerline LC2 Pages
Elecolit®4 Pages
Penloc® GT series4 Pages
Die-attach LED adhesives2 Pages
Adhesive Solutions for PCBs2 Pages
Vitralit® 70414 Pages
