PALLMANN Turbo Mill PP

Turbo Mill PP Turbo Mills, type PP are attrition and impact mills for pulverizing, fiberizing, crushing, mixing and blending of soft, brittle, tough, elastic, smearing, hygroscopic, heat sensitive, fatty, creasy and oily materials in dry or wet condition. Typical materials to be processed are: Medium hard Minerals Raw gypsum, bentonite, dry and wet clay, talc, graphite, muscovite, diatomaceous earth, fluorspar, chalk, bauxite, barite, anhydrite, asbestos, bitumen, asphalt. Coal-like Products Brown coal, peat mass, coke. Dyes and Pigments Organic and inorganic pigments, iron oxide, red lead, ochre....

The Turbo Mill, type PP is supplied in its standard version with finished product discharge straight down. A special housing design with integrated product discharge to the top is available. This option allows installation of the machine without any additional support frame or costly concrete foundation and pit. The Turbo Mill, type PP is powered by two independent motors via V-belt drive a smaller motor for the rotating baffle plate and a larger motor for the impeller. Turbo Mills, type PP have proven successful by their simple, safe and wear resistant construction. Unique method of size reduction...

PALLMANN SUPERIOR TECHNICAL SOLUTIONS Performance in every details The screenless Turbo Mill, type PP occupies a special position among the well-known grinding systems. Due to its flexibility the Turbo Mill, type PP is in use to process many different materials. The segment profile can be selected for the desired grinding action, according to the product requirements. Hard and brittle materials are pulverized by true impact action; fiber containing materials are fiberized, tough and elastic materials are fine granulated. The availability of a large variety of differently patterned and highly...

Easy cleaning The front door of the machine is easy to open and allows free access to all inner parts of the grinding chamber for easy cleaning and servicing. Material infeed A uniform continuous feed rate is necessary to achieve maximum performance. Different flow characteristics call for different types of adjustable feeders. Vibratory, screw, disc and belt feeders are commonly used. In any case magnets should be installed to collect tramp iron. PALLMANN supplies on request the complete feeding system including chutes manufactured to meet customers requirements and local conditions. Special...

PALLMANN PERFORMING SYSTEMS Proper installation guarantees optimum machine efficiency Turbo Mills, type PP should always be fed by vibratory or screw feeders in order to make sure, that a uniform feed rate and optimum use of the installed electric power can be achieved. Between the feeder and the feed chute of the mill it is recommended to install either a plate or drum magnet or even better a metal separator. The air flow generated by the Turbo Mill should be taken care of, by installing an aspiration system with dust collector. The Turbo Mill can be installed on a flat concrete floor if lateral...

Technical data: Type F=ca. mm approx. kg 3 approx. m kW 3 approx m /min Scale-up factor Diameter of grinding chamber Net weight machine without motor Shipping space machine only Recommended motor Air displacement of machine Standard version with bottom discharge Design with lateral product discharge to the top

The PALLMANN Group of Companies The PALLMANN Group of companies is a leading manufacturer for size reduction machines and systems for the process industries. PALLMANN Maschinenfabrik develops and manufactures machines and complete systems according to customer requirements or as standard solutions for the preparation of almost any material as well as recycling products. In its headquarters in Zweibrücken, PALLMANN operates one of the worlds largest research and technology centers as well as a training- and service center. More than 130 different test machines are available for the preparation...