*mydirectindustry

Catalogs
Palbit
Swiss Automatic Lathes

Swiss Automatic Lathes

Product catalog summary

Overview
This document provides comprehensive information on Swiss Automatic Lathes (SAL) and their compatible cutting tools and inserts, focusing on precision machining. It outlines the main features, specifications, and applications, emphasizing compatibility with Swiss automatic lathes.

Main Features
The document highlights the use of micro grain carbide inserts, which enhance strength, hardness, and wear resistance. These inserts are fully ground with sharp cutting edges and coated with advanced PVD technology to extend tool life.

Toolholders and Inserts
Various sizes for toolholders and inserts are listed in both metric and imperial measurements. All inserts are compatible with the same toolholder, simplifying the selection process.

Operations and Applications
Four primary operations are detailed: Turning, Parting Off, Grooving, and Threading, each with specific insert types and toolholder requirements.

Specifications
Detailed specifications for each insert type are provided, including dimensions, cutting conditions, and coding keys for product identification. Information on maximum depth of cut, corner radius, and front angle for different operations is included.

Cutting Conditions
Cutting conditions are specified for various materials (P, M, K, S) with grade and geometry codes. Tables with dimensions and recommended cutting parameters are included.

Customization
Blanks for inserts are available for customization, allowing users to modify inserts for specific machining operations.

Product Overview
Customizable blank inserts are discussed, available from stock or upon request with a two-week delivery time. The order code combines geometry and grade codes.

Specifications
Inserts are designed for turning with a maximum depth of cut of 3.00 mm. Two threading types are available: partial profile 55º and 60º. Adhering to recommended cutting speeds is emphasized for tool longevity.

Machining Recommendations
For parting off with a sub-spindle, a straight cutting edge is recommended for stability and surface finish. Without a sub-spindle, a 7° front angle insert is advised to minimize burrs, with a suggested 30% reduction in feed rate.

Cutting Conditions
Recommended grades include PH7920, PH7910, and PH7135, with specific cutting conditions provided. Detailed radial feed and insert width data are included, with recommended starting values for various machining fields.

Performance Comparison
SAL toolholders and inserts are compared with competitor products, showing productivity improvements of 20% to 25% with SAL products.

Test Reports
Test reports indicate the number of pieces produced and productivity improvements achieved with SAL products compared to competitors.

Technical Data
Specific cutting speeds, feed per tooth, and machining methods are detailed for different operations, including parting off and grooving, with the use of coolant.

Contact Information
Palbit, S.A. is the manufacturer, with contact details provided for further inquiries.

Catalog excerpts

Complete range on Swiss cut solutions NEW Swiss Automatic Lathes

Open the catalog to page 1

SAL - Swiss automatic lathes - Swiss Automatic Lathes | Maquinação de precisão | Herramientas para tornos automáticos Maquinação de precisão | Herramientas para tornos automáticos main aplications - Características principais | Características principales main features - Características principais | Características principales Palbit inserts are specially developed to suit the cutting conditions and swiss automatic lathes. Our inserts are made of micro grain carbide which results in maximum strength when considering hardness and wear resistance. All cutting edges are fully ground and exceptionally...

Open the catalog to page 2

SAL - Swiss Automatic Lathes | Maquinacao de precisao | Herramientas para tornos automaticos NEW Ma SAL - Swiss automatic lathes Maquinacao de precisao | Herramientas para tornos automaticos INSERTS CODE KEY - Chave de codificacao para pastilhas | Llave de codificacion de plaquitas 1OLDERS CODE KEY - Chave de codificacao para suportes | Llave de codificacion de herramienta Grooving Inserts 1 1 - Product line SAL - Swiss Automatic Lathes Line 2 - Maximum depth of cut (Turning and Grooving inserts) 25 - 2,5mm | 60 - 6,0mm 4 - Insert / toolholder side 6 - Cut thickness (Grooving, Parting Off and...

Open the catalog to page 3

SAL - Swiss Automatic Lathes | Maquinacao de precisao | Herramientas para tornos automaticos NEW Ma SAL - Swiss automatic lathes Maquinacao de precisao | Herramientas para tornos automaticos EXTErnAL TOOLhOLDErS | Suportes exteriores | herramientas de tronzado exterior LI Left hand style show Order code Codigo Reference Referenda Referencia Dimensions | Dimensoes | Dimensiones (mm) h b H L1 S Stock item | Itens de stock * Right insert only fits on right toolholder @1 Stock item Avaliable under request with delivery time 2 weeks produto de stock Disponivel sobre consulta com...

Open the catalog to page 4

SAL - Swiss Automatic Lathes | Maquinacao de precisao | Herramientas para tornos automaticos SAL - Swiss automatic lathes Maquinacao de precisao | Herramientas para tornos automaticos P(P00) series | Inserts | Pastilhas | Plaquitas FT SeFieS | Inserts | Pastilhas | Plaquitas Right hand style show Without front angle Sem angulo frontal Sin angulo frontal Parting off For partial profile Threading Para perfil parcial de roscagem Para perfil parcial de roscado Right hand style show Stock item 33 Avaliable under request with delivery time 2 weeks produto de stock Disponivel sobre consulta com...

Open the catalog to page 5

SAL - Swiss automatic lathes - Swiss Automatic Lathes | Maquinação de precisão | Herramientas para tornos automáticos grooving | Canais | Ranurado Radial Feed Maquinação de precisão | Herramientas para tornos automáticos threading | Roscagem | Roscado 60 NUT - High precision recommended starting value - Wide variety of insert widths Radial Feed Recomended cutting conditions Round grooving Recomended grade PH7920, (Vc) m/min. Feed fn (mm/rot.) recommended starting value Partial profile Radial Feed Recomended cutting conditions Recomended grade PH7920, (Vc) m/min. Avaliable under request (2 weeks...

Open the catalog to page 6

SAL - Swiss automatic lathes Torneamento de precisao | Herramientas para tornos automaticos Parting off Toolholder SALHER 1212 M07 Toolholder Competitor Equivalent product Insert Competitor Equivalent product Grade Competitor Equivalent product 10 000 COMPETITOR Cutting speed: Vc (m/min) Grooving Toolholder SALHER 1616 M07 Toolholder Competitor Equivalent product ICnosmerptetitor Equivalent product Competitor Equivalent product GCoramdpe titor Equivalent product Competitor Equivalent product ET COMPETITOR Cutting speed: Vc (m/min) Palbit, S.A. - P.O.Box 4 - Palhal - 3854-908 - Branca ALB - Portugal...

Open the catalog to page 7

Swiss Automatic Lathes

Swiss Automatic Lathes

Catalog excerpts

All Palbit catalogs and technical brochures