*mydirectindustry

Rods

Product catalog summary

Overview: This document provides detailed specifications and features of solid carbide tools, specifically focusing on metric rods. It includes information on grades, dimensions, tolerances, and applications for various machining operations.

Specifications:

Dimensions: The rods are available in various diameters ranging from 6.00 mm to 20.00 mm, with lengths from 51 mm to 110 mm.
Tolerances: The outside diameter tolerances are specified as h6, with specific values for different diameter ranges.
Surface Finishing: Maximum surface roughness (Ra) is 0.05 μm.
Roundness and Concentricity: Detailed tolerances for roundness and maximum concentricity are provided for different diameter ranges.

Grades and Applications:

Sub-Micrograin Grades: These grades offer a balance between wear resistance and toughness, suitable for machining grey cast iron, hardened steel, and non-ferrous metals.
Ultrafine Grades: Designed for high-speed machining (HSC) of hardened steels up to 60 HRC and abrasive aluminum alloys.
Performance Grades: Suitable for roughing titanium, heat-resistant alloys, and stainless steel.

Grain Size Classification: The document classifies hardmetal grain sizes into categories such as nano, ultrafine, sub-micron, fine, medium, coarse, and extra-coarse.

Additional Information: The document mentions the possibility of customizing lengths and diameters upon request, emphasizing flexibility in meeting specific customer demands.

Contact Information: For further inquiries, contact details for PALBIT S.A. are provided, including phone numbers and email.

Catalog excerpts

Solutions for solid carbide tools manufacturers NEW rods Metric

Open the catalog to page 1

Caracteristiques de nuances | Qualitat grades RODS Metric blanks | Barreaux - cotes metriques | Metric Stabe ULTRAFINE GRADE features | Caracteristiques de la nuance ULTRA FINE | ULTRAFEINKORNSORTEN eigenschaften The ultrafine carbide grade Nuance carbure micrograins ultra fin Ultrafeinstkornhartmetall Ultrafine grade PH0603 - Ultrafine carbide grade for HSC machining of hardened steels with a hardness up to 60 HRC and abrasive aluminium alloys. PH0603 - Nuance adaptee a l’UGV d’aciers trempes d’une durete superieure a 60 HRC et d’alliages d’aluminium abrasifs. PH0603 - Ultrafeinstkornhartmetall...

Open the catalog to page 2

Caracteristiques principales | Haupteigenschaften Outside diameter | Diametre exterieur | AuBendurchmesser Surface finishing | Etat de de surface | Oberflachengute Roundness | Cylindricite | Rundheit uniAo europeia Fundo Europeu de Desen volvi men to Regional PALBIT. S.A. - P.O.Box 4 - Palhal - 3854-908 - Branca ALB - Portugal T (+351) 234 540 300 | F (+351) 234 540 301 [email protected] - www.palbit.pt ^apcer_. ^ ^pcer _

Open the catalog to page 3

Rods

Rods

Catalog excerpts

All Palbit catalogs and technical brochures