RODS Premum

Product catalog summary

Overview: This document provides detailed specifications and features of solid carbide tools, focusing on rods with premium grades. It includes information on dimensions, grades, and applications for various machining processes.

Specifications:

Dimensions: Rods are available in diameters ranging from 6.00 mm to 20.00 mm and lengths from 51 mm to 110 mm. All rods come with a chamfer.
Tolerances: Diameter tolerances are specified as h6, with varying limits based on the diameter range.
Surface Finishing: Maximum surface roughness (Ra) is 0.05 μm.
Roundness and Concentricity: Detailed tolerances for roundness and concentricity are provided, varying with diameter and length.

Grades and Applications:

Sub-Micrograin Grades: These grades offer a balance between wear resistance and toughness, suitable for machining grey cast iron, hardened steel, and non-ferrous metals.
Ultrafine Grades: Designed for high-speed machining (HSC) of hardened steels up to 60 HRC and abrasive aluminum alloys.
Performance Grades: Specific grades are tailored for roughing titanium, heat-resistant alloys, and stainless steel.

Grain Size Classification: The document classifies hardmetal grain sizes from nano to extra-coarse, impacting the tool's performance characteristics.

Additional Information: Custom lengths and diameters can be requested. The document also includes contact information for Palbit S.A., the manufacturer.

Catalog excerpts

Solutions for solid carbide tools manufacturers premium grades Metric

Open the catalog to page 1

Caracteristiques de nuances | Qualitat grades RODS Metric blanks | Barreaux - cotes metriques | Metric Stabe ULTRAFINE GRADE features | Caracteristiques de la nuance ULTRA FINE | ULTRAFEINKORNSORTEN eigenschaften The ultrafine carbide grade Nuance carbure micrograins ultra fin Ultrafeinstkornhartmetall Ultrafine grade PH0603 - Ultrafine carbide grade for HSC machining of hardened steels with a hardness up to 60 HRC and abrasive aluminium alloys. PH0603 - Nuance adaptee a l’UGV d’aciers trempes d’une durete superieure a 60 HRC et d’alliages d’aluminium abrasifs. PH0603 - Ultrafeinstkornhartmetall...

Open the catalog to page 2

Caracteristiques principales | Haupteigenschaften Outside diameter | Diametre exterieur | AuBendurchmesser Surface finishing | Etat de de surface | Oberflachengute Roundness | Cylindricite | Rundheit uniAo europeia Fundo Europeu de Desen volvi men to Regional PALBIT. S.A. - P.O.Box 4 - Palhal - 3854-908 - Branca ALB - Portugal T (+351) 234 540 300 | F (+351) 234 540 301 [email protected] - www.palbit.pt ^apcer_. ^ ^pcer _

Open the catalog to page 3

RODS Premum

RODS Premum

Catalog excerpts

All Palbit catalogs and technical brochures