1. Catalogs
  2. PAL
  3. Chlorine Wipes

Chlorine Wipes

Chlorine Wipes

Chlorine Wipes

Product catalog summary
Product Overview:
Our ready-to-use Chlorine Wipes are designed for rapid biocidal action against a wide range of microorganisms and spores on non-porous surfaces of non-invasive medical devices. These wipes are PHMB free, alcohol-free, dermatologically tested, and have a low chlorine odor.

Ideal Use Cases:
  • High-level disinfection in areas with a known or high risk of infection.
  • Rapid use in time-sensitive areas due to their ready-to-use format.
  • Situations where other high-level disinfectants may cause toxicity or corrosion issues.

Material Compatibility:
  • Acrylic (PMMA)
  • Polycarbonate (PC)
  • Polyethylene (PE)
  • Polyvinylchloride (PVC)
  • Waterproof fabric
  • 316 Stainless Steel
  • 304S15 Stainless Steel

Sustainability:
The cardboard used in the outer packaging is FSC approved.

Usage Instructions:
  1. Conduct a risk assessment.
  2. Select the appropriate wipe.
  3. Use the S-Shape technique to clean, moving from clean to dirty areas.
  4. Discard used wipes in accordance with local guidelines.
  5. Allow the surface to dry naturally before use.
Do not flush wipes. Store in a cool, dry place out of direct sunlight.

Technical Details:
The wipes contain a unique Sodium Hypochlorite formulation with a lower pH (8.5-10) compared to other disinfectants, reducing corrosiveness. The packaging is environmentally friendly, requiring less storage space and creating less waste.

Efficacy:
  • Bactericidal: Effective against Enterococcus hirae, Leptospira interrogans, Pseudomonas aeruginosa, Staphylococcus aureus within 1 minute.
  • Mycobactericidal: Effective against Mycobacterium avium and Mycobacterium terrae within 1 minute.
  • Sporicidal: Effective against Bacillus cereus, Bacillus subtilis, and Clostridioides difficile within 2-5 minutes.
  • Virucidal: Effective against Adenovirus 5, Murine norovirus, Poliovirus, and Coronavirus within 1 minute.
  • Yeasticidal and Fungicidal: Effective against Aspergillus brasiliensis, Candida albicans, and Candida auris within 1-2 minutes.

Product Specification:
  • Count: 50 wipes per pack
  • Packs per case: 12
  • Product Code: S570110MPCE
  • Classification: Medical Devices Class IIa

For further information, contact Pal International Limited or Advena Limited.
See more

Catalog excerpts

Chlorine Wipes-1

Wipes Our ready to use Chlorine Wipes deliver a rapid biocidal action against a broad spectrum of micro-organisms and spores across non-porous surfaces of non-invasive medical devices. 1 product in this range. At a glance: • PHMB free • Alcohol free • Dermatologically tested Material compatibility: • Acrylic (PMMA) • Waterproof fabric Ideal for: High level disinfection where there is a known or high risk of infection* Rapid use in time sensitive areas with ready to use format Use where toxicity or corrosion from other high level disinfectants causes issues * Not intended for end point sterilisation of medical devices • Cardboard used in our outer packaging is FSC approved

 Open the catalog to page 1
Chlorine Wipes-2

Risk assessment Please follow your agreed risk assessment policy guidelines regarding the use of PPE. Check medical device equipment manufacturers guidelines for sodium hypochlorite suitability. Wipe selection Check pack for use period and dispense a wipe. Close pack to protect remaining wipes. If visible soil is present, remove with a wipe. Use a fresh wipe to disinfect the surface. S-Shape technique Wipe the surface in an S-Shape moving from clean to dirty. Use the wipe flat not scrunched, ensuring the entire surface is wetted. Do not go over the same area twice with the same wipe. Use a fresh...

 Open the catalog to page 2
Chlorine Wipes-3

f medipalTechnical details Our unique Sodium Hypochlorite formulation delivers the efficacy you need at a lower pH than comparable Peracetic Acid or Hydrogen Peroxide wipes (pH 8.5-10 compared to pH 12). This means the wipes are less corrosive on surfaces affected by higher values. The unique ready-to-use flow wrap packaging also creates less waste, requires less storage space and is more environmentally friendly to transport. Medipal Chlorine Disinfectant Wipes are made with stabilised Sodium Hypochlorite NaCIO. The extremely powerful chlorine based disinfectant solution has more than 1000 ppm...

 Open the catalog to page 3
Chlorine Wipes-4

f medipalEfficacy detailsEffective against Test Kill time Effective against Test Kill timeBactericidal Leptospira interrogans EN 13727 1 minute Enterococcus hirae EN 16615 1 minute Pseudomonas aeruginosa EN 16615 1 minute Staphylococcus aureus EN 16615 1 minute Mycobactericidal Mycobacterium avium EN 14348 1 minute Mycobacterium terrae EN 14348 1 minute Sporicidal_ Bacillus cereus EN 17126 5 minutes Bacillus subtilis EN 17126 5 minutes Clostridioides difficile* EN 17126 3 minutes *as tested on spores EN 16615 2 minutes Classification - Medical Devices Class Ila Virucidal Adenovirus 5* EN 14476...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.