Pal purge and trap with CDS 7000C

Product catalog summary

Introduction
The document discusses the PAL Purge and Trap system integrated with the CDS 7000C, designed to modernize the analysis of volatile compounds. This system addresses the limitations of traditional Purge and Trap setups, such as inflexibility, labor-intensive routines, and high costs.

Key Features

Integration with GC/MS using a single sample list.
Network capabilities with TCP/IP connectivity.
Robotic Tool Change allows multiple methods on the same instrument, including static and dynamic headspace, SPME fiber, Arrow, and liquid injection.
Automated calibrations using PAL Dilutor and EPA MegaMix® Standards.

Highlights

High automation level in Purge and Trap processes.
Multi-point calibrations and method flexibility.
User-friendly for both routine and expert users.
Standalone or GC-mounted options for a small footprint.

CDS 7000C Specifications

Pressure transducer for leak checks.
Programmable times from 0 to 999.9 minutes.
Trap dimensions: 0.3 cm OD x 28.5 cm Length.
Transfer Line: 1.5 m stainless steel clad fused silica.
Desorb pre-heat option and various temperature settings for different components.
Weight: 9.5 kg / 21 lbs; Dimensions: 18 cm W x 50 cm H x 33 cm D.

Options and Modules

Hot water rinse module.
Heated sparge vessel module.
Electronic mass flow controller.
ISTD addition module.

Software and Automation

PAL P&T Plugin Software integrates seamlessly with existing instruments.
PAL Sample Control software enhances productivity.
Automated calibration from standard solutions.

Conclusion
The PAL Purge and Trap system with CDS 7000C offers a comprehensive solution for modern analytical needs, providing flexibility, automation, and integration with existing laboratory setups.

Catalog excerpts

PAL Purge and Trap with CDS 7000C The Comprehensive Purge & Trap Solution

Open the catalog to page 1

PAL Purge and Trap with CDS 7000C Transforming Purge and Trap from tradition to present-day analytics Purge and Trap (P&T) is well-established since 1974 for analysis of volatile compounds with trace level sensitivity. Research and contract labs rely on P&T for environmental assessment, waste water, drinking water or beverage analysis applications, and worldwide applied protocols (DIN-EN ISO 15009; US-EPA 500-, 8000-series...). However, the P&T setups have evolved so far with several downsides of inﬂexible setups, laborious daily routines, and high running costs on one dedicated instrumentation...

Open the catalog to page 2

Waste Gas CDS 7000C P&T Industry Workhorse Highest Analytic Performance PAL Automated, incl. Leak Check, Wet Trap, Foam Sensor... CDS 7000C Specifications Pressure transducer for leak check Programmable times: 0- 999.9 minutes Trap: 0.3 cm OD x 28.5 cm Length Transfer Line: 1.5 m stainless steel clad fused silica Desorb pre-heat option Maximum Operating Temperatures Vocarb or Tenax Adsorbent Trap Weight: 9.5 kg / 21 lbs 18 cm W x 50 cm H x 33 cm D (7" X 19.5" X 13") • Valve oven 350°C • Transfer Line 350°C • Wet Trap 300°C • Adsorbent Trap 300°C CDS 7000C Options • Hot water rinse module • Heated...

Open the catalog to page 3

For more information on the PAL System visit: www.palsystem.com 0SI0si PAL is a registered trademark of CTC Analytics AG, Switzerland Part No. PAL Broch-Purge&Trap | Rev 1 - February 2017

Open the catalog to page 4

Pal purge and trap with CDS 7000C

Pal purge and trap with CDS 7000C

Catalog excerpts

All Pal system catalogs and technical brochures

Archived catalogs