TGAS-08

TGAS-08

TGAS-08

Product catalog summary
Technical Specifications
The TGAS-08 is a data-logger designed for geotechnical tests, offering a supply voltage of 9V DC to 18V DC, with a typical current draw of 1 A (maximum 1.5 A). It operates within a temperature range of -20 to +70 °C and provides GPS precision of less than 2.5 meters. The device dimensions are 365 mm in width, 240 mm in height, and 97 mm in depth.
External Connections
The TGAS-08 features a 12V DC power supply, encoder line-driver input, shock sensor trigger input, and two USB ports (1 USB-A and 1 USB-B). It includes an RS485 serial piezocone input, a standard 3G/GPS antenna connector, and a standard GSM SIM card slot.
Functionality and Design
The TGAS-08 is an all-in-one acquisition system that simplifies electronic testing on-site. It supports CPTu, S-CPTu, Magnetocone, and Vane Test data acquisition through an intuitive touch-screen monitor, readable in direct sunlight and extreme weather conditions. The device eliminates the need for portable PCs and bulky cabling, being easily installable and transportable in a compact case.
Data Transmission and Accessibility
Equipped with a GPS reader and 3G module, the TGAS-08 allows immediate transmission of test results from the field to the office. Data can also be downloaded via a USB key or directly to a PC through a USB-B port.
Additional Information
The document notes that data is non-binding and subject to change. Equipment specifications may vary based on the destination country.
See more

Catalog excerpts

TGAS-08-2

ALL-IN-ONE ACQUISITION FAST & INTUITIVE The use of digital probes and modules is becoming increasingly more common in geotechnical tests to obtain superior quality data compared to dynamic tests or static tests with Begemann cones. Often, however, the electronic systems used on site for the acquisition of data, prove to be unnecessarily complicated and not very practical. TGAS-08 IS A DATA-LOGGER designed to meet the increasing request to carry out ELECTRONIC TESTS ON SITE WITH A FAST, INTUITIVE TOOL. Pagani Geotechnical Equipment, thanks to years of experience, recently produced a NEW ALL-IN-ONE...

 Open the catalog to page 2
TGAS-08-3

TGAS-08 does not require the aid of a portable PC or bulky cabling and/or adaptors; it can be easily installed on the machine on site and transported in a handy case. It is equipped with a GPS coordinated reader and a 3G module that allows for test results to be transmitted from the field to the office. Furthermore, the collected data can be downloaded via a simple USB key or a second USB-B port that can be plugged in directly to your PC. TECHNICAL SPECIFICATIONS Supply voltage 9V DC - 18V DC Typical (maximum) current draw 1 A (1.5 A) Power supply Encoder input Trigger input USB ports Piezocone...

 Open the catalog to page 3
TGAS-08-4

GEOTECHNICAL EQUIPMENT www.pagani-geotechnical.com Pagani Geotechnical Equipment Srl Loc. Campogrande 26, 29010 Calendasco (Piacenza) Italy Tel: +39 0523 771535 - Fax: +39 0523 773449 [email protected] Non-binding data, with right to make changes. The diagrams may differ from the standard version. The equipment may differ depending on which country it is being shipped to.

 Open the catalog to page 4

All Pagani Geotechnical Equipment catalogs and technical brochures

  1. Magnetocone

    1  Page

  2. TG63-150

    10  Pages

  3. TG63-100

    10  Pages

  4. TG73-200

    10  Pages

  5. DPM30

    6  Pages

  6. PIEZOCONE MK

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.