TG73-200
10Pages

GEOTECHNICAL EQUIPMENT STATIC and DYNAMIC PENETROMETRIC TESTS IN A SINGLE MACHINE An extremely heavy duty rig for maximum performances in situ static and dynamic tests Its automatic telescopic anchoring system allows for A DRASTIC REDUCTION IN POSITIONING and anchoring TIMES and it can be used easily by a single operator. IT DRASTICALLY REDUCES THE TEST TIMES managing to anchor the machine even in the most challenging soils. The TG73-200 features a hydraulic tracked carriage which offers EXCELLENT MANOEUVRABILITY, EVEN ON WORST TERRAINS With its three stabilizers and reclinable mast, the...

TG73-200 A CONFIGURATION SUITED TO ANY SITUATION The TG73-200 can be configured on request for static (200kN), or static/dynamic penetrometric tests (average dynamic efficiency 78%). The static tests can be carried out with a mechanical cone (CPTm), or digital probes like the piezocone (CPTu), even combined with a seismic probe (S-CPTu) to give a better understanding of the soil. The static/dynamic method allows information to be obtained along verticals consisting of soil with different mechanical characteristics (from very soft to very hard and compact), while it is possible to overcome...

CPT TESTS Maximum thrust capacity (kN) - (pounds) 200 - 44961 Maximum extraction capacity (kN) - (pounds) 250 - 56202 Test speed (cm/s) - (foot/s) 2 - 0.065 Hydraulic selector for CPTm tests with load cell and electronic board for manual data acquisition. Maximum thrust readable from the load cell (kN) - (pounds) 200 - 55961 DP TESTS The following tests can be performed: Type Diesel cycle, liquid cooling, 4 in-line cylinders, indirect fuel injection, single shaft distribution up front and muffler Starter Electric Air filter Cartridge filter Consumption (litres/hour) -...

CYLINDER UNIT Maximum pushing speed (cm/s) - (foot/s) 10 - 0.328 Maximum extraction speed (cm/s) - (foot/s) 7.5 - 0.246 Lift and thrust unit piston stroke (mm) - (inch) 2037 - 80.2 STABILIZERS 3, with hydraulic action with articulated feet ANCHORING SYSTEM Screwing/unscrewing of anchoring screws Number of anchoring carriages Anchoring torque (kgm) - (inch-pound) - (Nm) Anchoring type Serial screws supplied (mm) Serial screws supplied (inches) Anchoring screw speed (rpm) Via gear motor (1 per carriage) 2, one for each side of the penetrometer 500 - 43398 - 4905 Telescopic 300 - 400...

TG73-200 SIZE AND WEIGHT CPT CONFIGURATION A Weight without accessories 2700 kg/5953 pound Soil pressure (EN 16228-1:2014) Soil pressure (without accessories)

TG73-200 SIZE AND WEIGHT CPT+DP CONFIGURATION A Weight without accessories 2900 kg/6394 pound Soil pressure (EN 16228-1:2014) Soil pressure (without accessories)

TG73-200 AVAILABLE ACCESSORIES DS 44 SAMPLER ROTARY HEAD available: Ø 63 x 750mm/1000mm Ø 100 x 750mm/1000mm HIDRAULIC SELECTOR (CPTm) SEISMIC MODULE S3X (S-CPTu)

GEOTECHNICAL EQUIPMENT www.pagani-geotechnical.com Pagani Geotechnical Equipment Srl Loc. Campogrande 26, 29010 Calendasco (Piacenza) Italy Tel: +39 0523 771535 - Fax: +39 0523 773449 info@pagani-geotechnical.com Non-binding data, with right to make changes. The diagrams may differ from the standard version. The equipment may differ depending on which country it is being shipped to.