Overview

The TG63-100 is a compact, highly mobile geotechnical penetrometer designed for both static and dynamic in situ soil testing. It integrates multiple penetrometric test capabilities into a single machine, offering high performance with ease of transport and operation by a single operator.

Key Features and Capabilities

• Test Types: Supports continuous dynamic tests (average efficiency 78%), static tests with mechanical cone (CPTm), piezocone (CPTu), and seismic piezocone (S-CPTu) for enhanced soil characterization.
• Static/Dynamic Combination: Enables detailed profiling of soil layers with varying mechanical properties, from very soft to very hard and compact soils.
• Pre-Drilling Capability: Optional rotary head allows overcoming very hard soil layers by performing pre-drilling.
• Mobility: Rubber tracks provide maximum mobility on rough terrains; three hydraulic stabilizers and a reclinable mast enable operation on steep slopes while maintaining vertical penetration.
• Single Operator Use: Semi-automatic anchoring system simplifies setup and operation, reducing test times significantly.
• Soil Sampling: The machine allows soil sample collection during testing.

Technical Specifications

• Maximum Thrust Capacity: 100 kN (22,481 pounds)
• Maximum Extraction Capacity: 120 kN (26,977 pounds)
• Test Speed: Up to 2 cm/s (0.065 foot/s)
• Maximum Penetration Speed: 13 cm/s (0.426 foot/s)
• Maximum Extraction Speed: 10 cm/s (0.328 foot/s)
• Engine: 4-stroke, 2-cylinder V60°, 16 Hp (11.8 kW) petrol engine with electric and manual start, forced air cooling, and muffler
• Hydraulic System: Hydrostatic with planetary reduction gear and negative brake; 2 in-line pumps; max operating pressure 245 bar (3553 psi)
• Travel: Rubber tracks with pre-loaded spring tensioner; max forward slope 25%, lateral slope 10%; max speed 1.8 km/h (1.1 mph)
• Noise Level: 108 dB (ISO 3744)
• Fuel and Oil Capacities: Fuel tank 7 liters (1.8 US gallons); hydraulic oil tank 27 liters (7.13 US gallons)
• Dimensions and Weight: Length 4600 mm (181.1 inch), Width 1586 mm (62.5 inch), Height approx. 1030-1077 mm (40.6-42.4 inch); Weight without accessories approx. 900-1000 kg (1984-2205 pounds)
• Soil Pressure: Ranges from 0.272 to 0.397 kg/cm² (27.2 to 39.7 kPa) depending on configuration

Anchoring System

• Semi-automatic modular anchoring with two carriages (one per side)
• Anchoring screws: Ø100 mm x 750 mm or 1000 mm (3.9 x 29.5 or 39.3 inch)
• Anchoring torque: 150 kgm (13,019 inch-pound / 1472 Nm)
• Anchoring screw speed: 23 rpm
• Hydraulically operated with articulated feet for stability

Available Accessories

• DS 44 Soil Sampler
• Rotary Head for Helical Rods (Ø63 x 750/1000 mm)
• Manual Selector for CPTm tests
• Seismic Module S3X for S-CPTu tests
• Piezocones with 10 cm² and 2 cm² areas for CPTu tests

Software and Documentation

• Software for CPTm test data acquisition and analysis
• User manuals for penetrometer and engine
• Certification booklet and training DVD
• Engraved aluminum plates on frame for hydraulic lever functions
• Electrical controls identified by printed adhesive films on operator panel

Safety and Emergency Equipment

• First aid kit and 1 kg fire extinguisher (Class A-B-C)

Color and Markings

• Standard frame color: Ruby Red RAL 3003

Summary

The TG63-100 penetrometer is a versatile, high-performance machine suitable for a wide range of geotechnical investigations. Its compact design, ease of transport, and single-operator usability make it ideal for challenging terrains and steep slopes. The combination of static and dynamic testing capabilities, along with optional accessories like seismic modules and rotary heads, provides comprehensive soil profiling and sampling solutions. Robust technical specifications ensure reliable operation, while safety and user-friendly features support efficient fieldwork.