*mydirectindustry

PIEZOCONE MK

Product catalog summary

Technical Specifications
The Pagani piezocone is a fourth-generation device designed for electronic static in-situ tests. It is available with maximum tip resistance (Qc) of 50 or 100 MPa. The piezocone features a 10 cm² conical tip, a titanium side friction sensor (FS), and a u2 sensor for measuring interstitial water pressure. The device is constructed with a special stainless steel alloy for durability and reliability.

Dimensions

Length: 320 mm
Diameter: 35.8 mm
Weight: 1.8 kg
Opening angle of bit: 60°
Side sleeve surface: 150 cm²

Sensor Specifications

QC: 50 - 100 MPa, 24-bit resolution, 0.005 MPa accuracy
FS: 1600 kPa, 24-bit resolution, 0.04 MPa accuracy
U2: 2500 kPa, 24-bit resolution, 0.04 MPa accuracy
TILT: 0° - 20°, 12-bit resolution, 0.5° accuracy

Construction and Calibration
The construction and calibration processes are continuously monitored and conducted in a controlled environment to ensure exceptional quality and reliability. The u2 sensor can be saturated with silicone oil or grease, depending on the testing requirements.

Additional Information
Data is non-binding and subject to change. Equipment specifications may vary based on the destination country. For more information, contact Pagani Geotechnical Equipment Srl.

Catalog excerpts

EVEN MORE DETAILED STATIC TESTS The Pagani piezocone for performing electronic static in-situ tests is now in its FOURTH GENERATION, and is available with maximum tip resistance (Qc) of 50 or 100 MPa. This is the result of innumerable tests carried out on a varying range of soils, and has been CAREFULLY MANUFACTURED to grant it a position at THE TOP END OF THE MARKET. This 10 cm2 piezocone has a SENSOR FOR SIDE FRICTION (FS) in titanium that is extremely SENSITIVE AND RELIABLE, just like the new central body in a special, stainless steel alloy capable of guaranteeing EXTREME INALTERABILITY, thus...

Open the catalog to page 2

a COMPLETE READING u2 Qc TILT SENSOR ' ______ 4 FILTER FOR MEASURING THE INTERSTITIAL 1 PRESSURE OF THE WATER FOUND IN THE SOIL! 10 cm2 CONICAL TIP TECHNICAL SPECIFICATIONS SENSOR

Open the catalog to page 3

GEOTECHNICAL EQUIPMENT www.pagani-geotechnical.com Pagani Geotechnical Equipment Srl Loc. Campogrande 26, 29010 Calendasco (Piacenza) Italy Tel: +39 0523 771535 - Fax: +39 0523 773449 [email protected] Non-binding data, with right to make changes. The diagrams may differ from the standard version. The equipment may differ depending on which country it is being shipped to.

Open the catalog to page 4

PIEZOCONE MK

PIEZOCONE MK

Catalog excerpts

All Pagani Geotechnical Equipment catalogs and technical brochures