DPM30
6Pages

GEOTECHNICAL EQUIPMENT GEOTECHNICAL EQUIPMENT DYNAMICPENETROMETRIC TESTSIN A PORTABLE DEVICE The DPM30 penetrometer allows continuous dynamic penetrometric tests to be performed. The fact that it is exceptionally small means it can be USED ON SITES THAT ARE INACCESSIBLE TO NORMAL MACHINES A hydraulic extractor is used to extract rods, casing tubes and samplers. The penetrometer is controlled via a pedal-operated distributor. THE HYDRAULIC CONNECTIONS ON THE VARIOUS COMPONENTS USE QUICK CONNECTORS. Reliability proven by hundreds of units operational around the world.

A POWER SUPPLY TO ANY SITUATION For the dynamic tests, the penetrometer is equipped with a 30 kg (66 pound) hammer with a 200 mm (7.87 inch) stroke, operated by a hydraulic motor. It is driven by a motor-pump unit, where the motor can be either electric (230Vac or 115Vac) or a petrol engine. The DPM30 can be used not only for dynamic tests, but also for soil sampling with limited disturbance, which guarantees improved ability to interpret the penetrometric data. With petrol engine AVAILABLE VERSIONS With petrol engine With 115 Volt electric motor With 230 Volt electric motor

DP TESTS The dynamic test can be carried out with the following values: Type single-cylinder, 4-stroke, unleaded petrol, forced air-cooling whit muffler Starter Hand starter Torque (kgm) - (inch pound) - (Nm) 0.76 - 66 - 7.5 @ 3060 rpm Air filter Pre-filter and cartridge filter Consumption (litres/hour) - (US gallons/hour) Variable from 0.54 - 0.14 and 1.22 - 0.32 depending on power requested Type Absorbed watts (W) Current used Power (Hp) - (kW) Ignition controls Connection to the mains Asynchronous single-phase engine 1800 230Vac AC 50 Hz 2.5 - 1.8 @ 2800 rpm Integrated...

NOISE OF PETROL ENGINE CONFIGURATION Lwac (dB) 108 (ISO 3744) Fuel tank capacity (litres) - (US gallons) 3.8 - 1 Hydraulic oil tank capacity (litres) - (US gallons) 78 - 2^ Standard colour Pump-motor unit frame treatment DOCUMENTATION Penetrometer user's manual, motor user's manual and certificate booklet In order to identify the functions of the pedal that operates the hydraulic distributor, there is an engraved aluminium plate riveted for its protection. Weight_ Petrol engine-pump unit 32.3 kg 71.2 pound Percussion system 47.5 kg 104.7 pound Hydraulic extractor 16...

GEOTECHNICAL EQUIPMENT www.pagani-geotechnical.com Pagani Geotechnical Equipment Srl Loc. Campogrande 26, 29010 Calendasco (Piacenza) Italy Tel: +39 0523 771535 - Fax: +39 0523 773449 info@pagani-geotechnical.com Non-binding data, with right to make changes. The diagrams may differ from the standard version. The equipment may differ depending on which country it is being shipped to.