Model 108AMX


Catalog excerpts

Model 108AMX - 1

1 or 2Ø – Linear AC Power Source Standard Features: • Advanced Linear Amplifiers Provide Very Low Voltage Distortion, no Switching Noise, Fast Voltage and Current Slew Rates, Exceptionally Low Output Impedance and High Peak Current Capability Single or Split phase selectable output from front panel or bus command 20 to 5,000 Hz. Full Power Bandwidth Operation – 5Hz to 50KHz small signal bandwidth, 3dB at 10% of full voltage Precision Voltage Programming – 0.05% with Continuous Self-Calibration (CSC) engaged True-RMS Metering of Volts, Amps, and Power GPIB (IEEE-488.2) or RS-232 Interface Waveform Library – Arbitrary Waveform Generator Up to 99 Programs with Associated Transients for Static and Dynamic Test Applications UPC Studio Software Suite Available Options: • • • • Programmable Output Impedance Harmonic Analysis and Waveform Synthesis Peak Inrush Capture and Waveform Analysis (Available on models with UPC3 controller) UPC Test Manager Software UPC Manager Software Suite As a member of Pacific Power’s AMX-Series popular family of high performance Linear AC Power Sources, the 108AMX offers the same low output voltage noise and distortion, ease of installation, and high AC waveform fidelity as found in all of Pacific Power’s Linear AC Power Sources. Control and operational features provide a high degree of versatility and ease of use for applications ranging from simple, manually controlled frequency conversion to harmonic testing and sophisticated programmable transient simulation. AC TEST POWER All 108AMX models are equipped with a powerful micro-controller with the ability to operate as a fully integrated test system. This enables a variety of power conditions and transients to be applied to the device under test while metering and analyzing all output performance parameters. For higher power requirements, refer to the AMX & ASX series catalog. FREQUENCY/ VOLTAGE CONVERSION The 108AMX is an excellent source of stable AC Voltage over the frequency range of 20 to 5,000 Hz when using the high-end UPC-12 controller. Also available in 1,200 Hz maximum output frequency when using UPC-1 or Manual controller. The output frequency is quartz-crystal stabilized. Output voltages up to 135VL-N in single phase mode and up to 270VL-L in split phase mode are available on the 108AMX model and up to 600VL-L in three phase mode on the 108AMXT model. PHASE CONVERSION With the ability to provide two phase output, the 108AMX is a good choice to convert one-phase line voltage into precisely controlled split (two-phase) output power. UPC SERIES CONTROLLER Three controller models are available in both manual and programmable control version. All controllers provide manual operation from the front panel. Programmable Controllers may be operated from the front panel or from a remote interface via RS 232 or GPIB. Master the Power of the Wave! UPC Manager Software gives you the tools necessary to quickly and easily operate your AC Power Source. With our graphical interface control all areas of your AC Power Source testing with simple presets, user prompts, test sequences, test plans and custom reports. The Leader in AC Power Technology An early pioneer in the development solid-state power conversion equipment, Pacific Power Source continues to develop, manufacture, and market both linear and high-performance PWM AC Power Sources. Pacific Power Source’s reputation as a market and technology leader is best demonstrated by its continuing investments in both research and development and world-wide customer support. With corporate owned offices in the United States, Germany, the United Kingdom, and China, local personalized support is always available. FREQUENCY CONVERSION

Open the catalog to page 1
Model 108AMX - 2

108AMX-108AMXT Output Ratings 108AMX Rated Power (VA)1 Coupling Mode Output Voltage3 VRMSMax (L-N/L-L) Frequency Range Input Power Coupling Mode Output Voltage3 VRMSMax (L-N/L-L) Frequency Range Input Power Unit Height In/mm/U Unit Weight (Lbs/Kg) Unit Height In/mm/U Unit Weight (Lbs/Kg) 70/31.8 NOTES: 1. Rated output power is based on a combination of nominal output voltage, rated current and load power factor. Values stated represent the maximum capabilities of a given model. Consult factory for assistance in determining specific unit capabilities as they might apply to your application....

Open the catalog to page 2
Model 108AMX - 3

108AMX-108AMXT Total Control, Metering, and Analysis of AC Power- Simple, Intuitive Operation The UPC Controller is a highly versatile one, two, or three phase oscillator/signal generator designed to control any of Pacific Power’s AC Power Sources. Three controller models, UPC-1M, UPC-1, or UPC-12 are offered. To use the full 5KHz power bandwidth of the 108AMX, the UPC-12 controller is required. Parameter Control Using the front panel keyboard and display, all controller models provide for selection of power source output mode, coupling, voltage, and frequency. Selecting the correct UPC...

Open the catalog to page 3
Model 108AMX - 4

Mechanical Specifications General/Environmental Operating: 0° to 55° C Temperature Storage: -10 ° to 70° C Depth (Approx. from front panel to the rear of chassis.) Cooling Front and side forced air intake (100 CFM) with rear exhaust. Altitude Operating: 6,500 Ft (1,981m) Storage: 40,000 Ft (12,192 m) Mounting Standard 19" rack (483mm). Cabinet options available. Heat Dissipation 800BTU/ hr (Full kW Load) Audible Noise 65 dba Max @ 1 Meter GPIB Interface, IEEE-488.2. (Standard on UPC-32) /M7073 Safety Interlock Normally Open Contacts Agency Approvals /M99413 Safety Interlock Normally Closed...

Open the catalog to page 4

All Pacific Power Source catalogs and technical brochures


    2 Pages

  2. Model 305AMX

    4 Pages

  3. Model 345AMX

    4 Pages

  4. Model 120ASX

    4 Pages