AMX Parallel AC Power Systems Product Brochure
6Pages

Parallel AMX AC Power Systems AMX Power Systems 8kVA to 30kVA 20-5,000 Hz 1Ø4 0-338VL-N 2Ø4 0-600VL-L 3Ø4 0-338VL-N/585VL-L Standard Features: • • • • • • • • • • Master/Slave Operation of 2 to 5 AMX AC Power Sources provides AC Power Levels to from 8KVA up to 30KVA Advanced Linear Amplifiers Provide Very Low Voltage Distortion, No Switching Noise, Fast Voltage and Current Slew Rates, Exceptionally Low Output Impedance and High Peak Current Capability 1, 2, or 3 Phase Output Form Selectable from Front Panel or Bus Command 20 to 5,000 Hz. Operation – 5Hz to 50KHz small signal bandwidth, 3dB at 10% of Full Voltage Precision Voltage Programming – 0.05% with Continuous Self-Calibration (CSC) engaged True-RMS Metering of Volts, Amps, and Power GPIB (IEEE-488.2) or RS-232 Interface Waveform Library – Arbitrary Waveform Generator 99 Programs with Associated Transients for Static and Dynamic Test Applications UPC Studio Software Suite Available Options: • • • • • • T-Versions Include Transformer Assembly for Higher Voltage Ranges Fully Installed and Wired in Industrial Strength Instrument Cabinet with Caster Base Programmable Output Impedance Harmonic Analysis and Waveform Synthesis UPC Test Manager Software Application IEC Test Sequence Available for IEC 610004-11, -4-13, -4-14, -4-27, -4-28 and -4-34 AC Immunity Testing UPC Manager Software Suite Master the Power of the Wave! UPC Manager Software gives you the tools necessary to quickly and easily operate your AC Power Source. With our graphical interface control all areas of your AC Power Source testing with simple presets, user prompts, test sequences, test plans and custom reports.. FREQUENCY CONVERSION Parallelable AMX Models These special version AMX units are designed to easily parallel in a master slave configuration to allow high power cabinet systems to be created ranging from 8kVA to 30kVA. Either 4.5KVA or 6KVA AMX/AMXT units are used as building blocks for these power racks. The versatility of the Master/Slave Paralleling option provided by the 140/160/345/360AMX and 140/160/345/360AMXT AC Power Sources provide the operator with a wide variety of options using a building block approach to higher capacity linear AC Power Source systems. Each parallelable group of AC Power Sources requires at least one ‘Master’ (/MST) unit with either UPC-12 or UPC-32 controller and one or more “Slave” (/SLV) units. Any /MST unit can be used as a / SLV with another /MST unit by setting a rear panel mounted switch. This feature provides great flexibility for reconfiguring multiple units into a larger power system as demanded by changing application requirements. As a member of Pacific's AMX-Series popular family of high performance Linear AC Power Sources, these AMX systems offer the same absence of output switching noise and very low voltage distortion, ease of installation, and high AC waveform fidelity as found in Pacific's single chassis Linear AC Power Sources. The Leader in AC Power Technology An early pioneer in the development solid-state power conversion equipment, Pacific Power Source continues to develop, manufacture, and market both linear and highperformance PWM AC Power Sources. Pacific Power Source’s reputation as a market and technology leader is best demonstrated by its continuing investments in both research and development and world-wide customer support. With corporate owned offices in the United States, France, the United Kingdom, and China, local personalized support is always available. THE POWER OF EXPERTISE AEROSPACE R&D MILITARY MANUFACTURING CUSTOM

AMX Power Systems Output Ratings Single Phase Parallable AMX Models (parallel up to five like units to configure up to 30kVA System) Model3 Rated Power (VA) 140AMX(T) -UPC12/MST1 140AMX (T)/SLV2 160AMX(T)UPC12//MST1 160AMX(T)/SLV2 Output Form Output Voltage Ranges Input Power Form Direct (T) 1.5:1 (T) 2.0:1 Height in/mm/U Frequency Range (Hz) (T) 2.5:1 Weight (Lbs/Kg) Power Source Transformer Chassis Current per Phase (Arms) Power Source Transformer Chassis 4000 1Ø/2Ø 0-135/270 32/16 0-202/404 21.3/10.7 0-270/540 16/8 0-338/600 12.8/6.4 3Ø 47-63 Hz 20-5000 (PS): 14/356/8U (T): 5.25/133/3U...

--POWER SOURCE Input Power Requirements (47-63 Hz) Thermal and Power Factor Rating Curves for specific model Input Power requirements. Note MST and SLV have same input requirements as respective Rated Continuous Load Current as a Function of Ambient Temperature. Data is shown for combined system configu- THERMAL DERATING CHART THERMAL RATING -AC CURRENT RMS Short tern overloads to 150% of rated current are permitted. Operating time before thermal shutdown or circuit breaker trip varies from seconds to several minutes depending upon line and temperature conditions. Power Factor Rating Curves...

AMX Power Systems Total Control, Metering, and Analysis of AC Power- Simple, Intuitive Operation The UPC Controller is a highly versatile one, two, or three phase oscillator/signal generator designed to control any of Pacific Power’s AC Power Sources. Only the full featured UPC-12 or UPC-32 Controller is offered for use with the 3 single or three phase parallelable AMX models. 4 x 16 Character LCD Parameter Control Using the front panel keyboard and display, all controller models provide for selection of power source output mode, coupling, voltage, and frequency. Selecting the correct UPC...

AMX Power Systems General/Environmental Temperature Operating: 0° to 55° C Storage: -10 ° to 70° C Humidity 0 - 95%, Non-condensing Cooling Per Unit Altitude Front and side forced air intake (600 CFM) with rear exhaust. Automatic Fan Speed Control for low acoustic noise and extended fan life. Operating: 6,500 Ft (1,981m) Storage: 40,000 Ft (12,192 m) Mechanical Specifications See System Configuration Table for required rack Height height by configuration Depth Units: 23.5” (597mm) Transformer Module: 3U (5.25”, 133mm) (Approx. from front panel to the rear of chassis). Weight Depends on...