1. Catalogs
  2. OxyGuard
  3. OxyGuard Mini Probe

OxyGuard Mini Probe

OxyGuard Mini Probe

Product catalog summary
Overview: The OxyGuard Mini Probe is a compact, membrane-covered galvanic cell designed to measure dissolved oxygen levels in various environments such as water, air, oil, and wine. It generates an electrical signal proportional to the oxygen pressure it detects.
Technical Advantages:
  • Galvanic type with no warm-up time required.
  • Short response time and excellent long-term stability.
  • Easy and fast probe renovation.
Specifications:
  • Dimensions: 15 mm diameter, 101 mm length, weight approximately 30 g plus leads.
  • Principle: Self-polarizing, self temperature-compensating galvanic cell.
  • Output Signal: Typically 10 to 40 mV in air.
  • Measuring Range: 0 to 200% saturation DO.
  • Accuracy: 1% of measured value, repeatability typically ±0.5%.
  • Flow Requirements: Minimum 1 cm/sec in water, dependent on DO and temperature.
  • Operating Conditions: -5 to 45°C.
Spares and Accessories: Includes membranes, 50 ml electrolyte, cleaning pad, and membrane protector. Ordering options include the D161SV Mini probe with spares and the D16TOOL membrane replacement tool.
Key Features:
  • Self-polarizing and fully temperature compensated.
  • Compact and lightweight design.
  • Durable membrane.
See more

Catalog excerpts

OxyGuard Mini Probe-1

OxyGuard Mini Probe Small Size Dissolved Oxygen Probe The OxyGuard Mini Probe is a membrane covered galvanic cell that generates an electrical signal proportional to the oxygen pressure it senses, whether it is placed in water, air, oil, wine etc.. Just 15mm in diameter and 101 mm in length it can, for example, be lowered into a wine bottle. The probe acts as a battery with output voltage that is proportional to the oxygen concentration. it does not need an applied voltage og microprocessor controlled electronics in order to function. The Mini probe has a true zero and a low output impedance, and can be connected to most types of transmitter or metering equipment with input impedance 1 megohm or greater and galvanic isolation if the equipment is connected to other equipment. Calibration is carried out by placing the probe in air and adjusting the transmitter or metering equipment connected to it. Technical Advantages • Galvanic type. • No warm up time. • Remarkably short response time. • Excellent long-term stability. • Probe renovation easy and fast when needed. Specifications Dimensions: Principle: Output signal: Measuring range: Accuracy: Flow Requirements, water: Operating Conditions: Spares: • Self-polarizing. • Fully temperature compensated. • Very small size, very light weight. • Tough membrane. Diameter = 15 mm, length = 101 mm. Weight approx. 30 g plus leads. Standard lead length 3 m. Galvanic cell, self polarizing, self temperature-compensating. Typically between 10 and 40 mV in air. Typical 0 to 200% saturation DO. 1% of measured value, repeatability typically +/. 0.5% of value. Dependent on DO and temperature, typically minimum 1 cm/sec. -5 to 45°C. Membranes, 50 ml electrolyte, cleaning pad, membrane protector. Mini probe in transport chamber with with spares and spare cap. Membrane replacement tool. D16 Mini Probe brochure GB 2014 03 Data subject to change without notice OxyGuard International A/S Farum Gydevej 64, DK-3520 Farum, Denmark Tel: +45 45822094, Fax: +45 45821994 Email: [email protected] Web Site:

 Open the catalog to page 1

All OxyGuard catalogs and technical brochures

  1. TGP Probe

    2  Pages

  2. Oxy Clean

    1  Page

  3. Handy Polaris

    2  Pages

  4. Handy pH

    2  Pages

  5. CO2 Analyzer

    2  Pages

  6. Atlantic

    4  Pages

  7. Pond Master

    1  Page

  8. pH Manta

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.