Technical Data Sheet Compact Integrated X-ray Source The Optima 98017 is a low power, fully integrated, compact X-ray source operating at 45kV and 50µA. Featuring a small, lightweight package, the 98017 is ideal for use in handheld X-ray systems and other small enclosures. This reliable and cost-effective component operates without an external controller or high voltage cable connections. Small, compact design Easily integrates into your X-ray systems Ideal for handheld X-ray systems Stable X-ray output Highly repeatable measurements Fully shielded package Eliminates X-ray leakage Intelligent controller Enables maximum lament life Advanced interface Simplies communication and system integration Applications Materials Characterization & Identification (XRF) • • • • • • • Metal and alloy sorting Mining and geology Environmental analysis Lead in paint Regulatory (RoHS/WEEE) Art and archeometry R&D Specifications Operating voltage range: Input voltage: Maximum power: Maximum input power, 10µA: Maximum input power, 50µA: Beam current: High voltage and beam current setting time: Focal spot size: Focus to Object Distance (FOD): Flux stability (measured/theoretical): Target type: Target material: Window material and thickness: Unobstructed cone of illumination: Cooling method: Max case operating temp: Ambient operating temp: Radiation leakage: Source package pressure: Weight: Storage conditions: *Note: Barometric Pressure: 50-106kPa Humidity: 10-90% (no condensation) Condensation on Be window will cause window corrosion, vacuum loss, and X-ray tube failure X-Ray Technology www.oxford-instruments.com 360 El Pueblo Way Scotts Valley, CA 95066 Phone: (831) 439-9729 Email: [email protected]

Optima 98017 Compact Integrated X-ray Source DRAWING 8278, REV. C B INTERFACE: MILLIMAX SOCKET, TOP ENTRY 16 PIN, OEM TYCO ELECTRONICS P/N 8-21507906 RIBBON CABLE MIN. BEND R 1/16" LABELS 3.18 .13 CENTER OF X-RAY SPOT 145° MAXIMUM X-RAY ANGLE 0.76 .030 DEPTH TO SPOT PARTIAL SECTION B-B INSIDE DETAIL CIRCLE A Scaling (Analog) Analog Output Digital Input 0-4.5V monitor = 0-45kV monitor Connect to Pin 10 to enable unit Analog Input Analog Ouput Analog Input Digital Output Pressure Monitor Analog Output Digital Output Connect to Pin 6 to enable unit 1V=10psi 0V=unit is not ready to produce X-rays...