ADVANTAGES • Extensive alarm and configuration functions • Display connects to continuous power to • The TPMS pressure and temperature control system allows direct and constant monitoring of the condition of the tyres on your vehicle. The in-cab display not only receives information about the tyres on the truck, but also obtains data for the connected trailer, thanks to the installed Smart Booster; this allows easy automatic readings for multiple trailers with no need for any additional equipment. The TPMS system gives drivers the assurance of always having the right tyre pressure, thus reducing excessive fuel consumption and keeping the vehicle under proper control. The display can also be connected to a GPS system to send any data or alarms detected by the TPMS device to the office. 7 GOOD REASONS • Protection from premature tyre wear • Prevention of tyre failure through detection of even the slightest damage • Reduction of fuel consumption and maintenance costs for the company ALARMS FUNCTION • High Temperature Alarm activated when the temperature exceeds 90°C Low Pressure Level 1 Alarm activated when the pressure is 12,5% lower than the standard Low Pressure Level 2 Alarm activated when the pressure is 25% lower than the standard Low Pressure Level 3 Alarm activated when the pressure is 50% lower than the standard High Pressure Alarm activated when pressure is 25% higher than the standard Leakage Pressure Alarm activated when the tire pressure decreases 3psi within 12 seconds Sensor Problem Alarm activated when radio communication with a sensor is lost • Reduction of exhaust gas emissions to help protect the environment • Reduction of wear and damage to shock absorbers, suspension and other vital parts of the vehicle • Constant monitoring of tyre pressure for improved driving comfort • Control of braking to help reduce the possibility of accidents ensure full-time monitoring Entire system designed to suit all types of commercial vehicles Monitoring of up to 38 separate tyres Smart Booster allows long-distance radio communication Hand Tool and Smart Booster can communicate to configure and view the sensors installed on the trailer System easy to use and

• Choise of three types of display: ST (standard) - DIN - RS (RS232 serial port) • Ergonomic and industrial design displays • Acoustic and optical alarm for noisy environments • LCD screens with adjustable display • LCD screens with large display to visualise all informations • LCD screens with backlight contrast for better visibility • User-friendly programming controls • Connect to continuous power supply to ensure full-time monitoring • RS232 serial port for data transmission • Screw-on sensors, ergonomic appearance and easy to install • High-strength material, wear-resistant and resistant...