1. Catalogs
  2. OTTO
  3. ULTRA SMALL SUBMINIATURE BASICS
video corpo

ULTRA SMALL SUBMINIATURE BASICS
1 /1Page

ULTRA SMALL SUBMINIATURE BASICS

ULTRA SMALL SUBMINIATURE BASICS
1 /1Page

Catalog excerpts

ULTRA SMALL SUBMINIATURE BASICS-1

ULTRA SMALL SUBMINIATURE BASICS BASIC SWITCHES SINGLE BREAK, SNAP-ACTION, COMMERCIAL & MILITARY GRADES, ULTRA SMALL SUBMINIATURE BASIC SWITCHES The B1 series basic switches are ultra-subminiature in size, designed to reliably switch logic level signals as well as up to 2 amps switching capacity for a minimum of 25,000 cycles. Mechanical life expectancy is in excess of one million cycles. The molded housing is rugged and structurally stable. The terminals are molded-in and sealed against solder flux entering the switch. The terminals are available in a choice of double turret solder style and 0.020” x 0.025” PC pins. The B1 series is also available with integral lever actuators as B1-5 series. Ultra-compact: only 0.300” w x 0.255” h x 0.100” thick 1 million cycle life, B1-5 Series Logic level switching capability Designed in accordance with MIL-PRF-8805/94 Available in Commercial & Military grades Choice of solder or PC molded-in terminals Precision operating points Momentary action RoHS compliant Actual Size Standard Characteristics/Ratings: ELECTRICAL RATINGS: Load Logic Level *L/R = 0.026 Electrical Life: 25,000 cycles Mechanical Life: B1 Series is 100,000 cycles (B1-5 Series is 1,000,000 cycles) Seal: Unsealed Operating Temp Range: -55°C to +125°C Operating Force: 6 oz max Release Force: 0.7 oz min Operate Point: 0.220 +/- 0.015 inches from mounting holes Overtravel: 0.003 inches min Movement Differential: 0.002 inches nominal, 0.005 inches max Pretravel: 0.015 inches max MATERIALS: Double Turret Terminals Style Code 2 PC Pins Terminals Style Code 3 Case: Thermoset, blue Cover: Thermoplastic, blue Button: Thermoplastic, black ORDERING INFORMATION: B1 Basic Select the OTTO B1 basic switch to match your specific circuit and mechanical requirements. To order, specify your requirement using the OTTO Part Number Code shown below. Example: B1-12111 specifies Military grade construction, double turret terminals, 6 oz max operating force and silver/gold high current contacts. Terminals: Silver with gold Contacts: Stationary: Silver with gold Moveable: Silver with gold Terminal Hardware: None provided Mounting Hardware: None provided B1 PART NUMBER CODE X Construction Grade Terminal Style* Operating Force Movement Differential Contact Material 2. Double Turret 3. PC Pins 1. Silver/Gold – High Current 3. Silver/Gold – Low Current * Wire leads available, contact factory. Specifications Subject To Change Withou

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.