NOTEWORTHY DESIGNS EXAMPLES OF APPLICATION SPECIFIC DESIGNS Two-Step Trigger Switch with Boot Retaining Feature Sealed to IP68S, this trigger switch was designed for use in a grip - specifically for sealed grip applications. This switch has an actuating force of 3.0 lbs. to make the first pole; 6.5 lbs. passing through a detent to actuate the second pole. Body is black and the trigger is red. Rating: 10 amps Resistive @ 28VDC This precision trigger switch offers two level operation with positive detent between levels. First level operates with 2.5 lbs. of force. It is moistureproof and dusttight sealed per MIL-PRF-8805, Sym. 2. The switch also provides electromagnetic pulse shielding. Trigger is gray. Body is black. Features OTTO B3 basic switches per MIL- Rating: 8 amps Resistive @ 28VDC Single Step Trigger Switch This trigger switch is an excellent choice when a two step trigger is not required. Actuating force is 3 lbs. to pass through the detent and will continue travel after the detent. Button: Grey thermoplastic Housing: Black thermoplastic Side covers: Black anodized aluminum Rating: 7 amps Resistive @ 28VDC U2-054 This precision trigger switch has an actuating force of 2.25 lbs. to make the first pole; 6.5 lbs. passing through a detent to actuate the second pole. Housing is black thermoplastic, button is red thermoplastic. Two models: Cat. No. MILITARY No. Width (inches) Flight Grip Rocker Switch Compact lightweight design for flight grips and other space sensitive installations. • Shallow mounting depth • ON-OFF-ON spring return to center • 2 circuit (N.O.-N.C.) switches • Utilizes OTTO B3 Basic switches per MIL-PRF-8805/101 • Low level switching (10mA @ 30mV) or standard rating (see B3 pages) • Black anodized housing • Black molded button U2-621 This linear output Hall effect rocker switch will meet your needs when long life is required. Rated for 2.5 million cycles, it was designed for demanding applications and is fully protected against electromagnetic and radio frequency interference (EMI and RFI) up to 100V/M. U2-452 Rocker Switch with Pushbuttons This rocker switch with a beveled button style offers short behind panel depth by using two P8 momentary action, subminiature, double break pushbuttons. IP68S version available. Button: Black Nylon Standard Rating: 10 amps Resistive @ 28VDC Low Level: 10mA @ 30mV U2-278 Compact, robust and reliable for grip or panel mount. The FNR is a 3-position switch that provides operator comfort by reducing the movement required to change direction and switch gears. Enhanced visibility with back lighting so switching is easy to see in poor or nighttime conditions. The switch has a mechanical life of 1 million cycles. FNR-1002 Standard 3-position rocker with 36" 20 AWG wire leads 226 OTTO Full Line Catalog Specifications Subject To Change Without Notice

EXAMPLES OF APPLICATION SPECIFIC DESIGNS Dome Pushbutton with Sealing Boot Designed for industrial environments, this momentary action, commercial grade P3 pushbutton is made with a secondary sealing boot for added protection against dust, sand and water ingress. Seal: Watertight to IP68S Electrical Life: 100,000 cycles Button: Valox Case: Aluminum alloy, black anodized Rating: 10 amps Resistive @ 28VDC P3-90291-1 Park Brake This heavy duty push-pull switch was designed specifically for off-road heavy duty equipment. With an electrical life of 200,000 cycles and watertight to IP68S, the U2-326...