Catalogs >
OTTO >
B2

B2
3Pages

Catalog excerpts

BASIC SWITCHES BASIC SWITCHES SINGLE BREAK, COMMERCIAL & MILITARY GRADES, TWO WIDTHS Double Turret Available in two widths, the B2 series can be specified to fit your application exactly. While the B2 series conforms to and is qualified to various military specifications, the same switch can be specified for commercial use at a cost savings. In addition to being available with integral actuating levers as in the B2-5 series, the B2 series is also available with the A1 series auxiliary lever actuators as shown in the B3 section. Solder Turret A choice of turret, quick connect and three lengths of printed circuit board style terminals are available for both the 0.156” and 0.200” wide models. Whether it be military or commercial applications, OTTO can provide features you select for your application. You can specify the features you require without paying for ones you don’t need. The OTTO B2 sub-subminiature switches conform to and are qualified under MIL-PRF-8805/4, MIL-PRF-8805/106 (high temp -55°C to +205°C) and MIL-PRF-8805/109. Basic switches are designed for miniature spaces where cam or other limit actuators are used on the button. In addition, a full range of toggle, pushbutton and lever actuators are available. Right Angle Quick Connect Standard Characteristics/Ratings: ELECTRICAL RATINGS: High Level Switch Ratings Load 115/250VAC, 60Hz silver contacts with gold plate Resistive 7A Choice of 0.156” & 0.200” wide models Up to 7 amps switching Sensitive movement differentials Low operating forces Choice of 8 terminal styles or wire leads Long operating life Qualified under MIL-PRF-8805/4, MIL-PRF-8805/106 & MIL-PRF-8805/109 • UL recognized & CSA certified • RoHS/WEEE/Reach compliant 28VDC, silver contacts with gold plate Resistive 7A Low Level Switch Ratings 28VDC, gold plate contacts Resistive 1A Electrical Life: Mechanical Life: Seal: Unsealed Operating Temp Range: -55°C to +85°C, high temp rating -55°C to +205°C Operating Force: Release Force: Operate Point: 0.320 +/- 0.015 inches from mounting holes Movement Differential: 0.006 inches max Pretravel: MATERIALS: Case: Thermoset, blue Thermoplastic, blue Thermoplastic, black Brass, gold over nickel Stationary: Silver with gold Moveable: Silver or gold Terminal Hardware: None provided Optional Wires: Mounting Hardware: None provided Specifications Subject To Change Without Notice

Open the catalog to page 1

BASIC SWITCHES BASIC SWITCHES SINGLE BREAK, COMMERCIAL & MILITARY GRADES, TWO WIDTHS Certain OTTO B2 models have been qualified to the military specification for these parts. The following is the latest listing. TERMINAL STYLE 6 PRINTED CIRCUIT PIN 0.090" LONG TERMINAL STYLE 1 SINGLE SOLDER TURRET (OVAL HOLE) TERMINAL STYLE 2 DOUBLE SOLDER TURRET (OVAL HOLE) TERMINAL STYLE 7 RIGHT ANGLE PRINTED CIRCUIT PIN TERMINAL STYLE 9 RIGHT ANGLE, OPPOSITE OF 7 TERMINAL STYLE 3 QUICK CONNECT MATES WITH AMP .058” RECEPTACLES (.250) TERMINAL STYLE 4 PRINTED CIRCUIT PIN 0.150" LONG WIRE LENGTH CODE A B C...

Open the catalog to page 2

BASIC SWITCHES SINGLE BREAK, COMMERCIAL & MILITARY GRADES, TWO WIDTHS BASIC SWITCH APPLIES TO ALL SWITCHES ON THIS PAGE Specifications Subject To Change Without Notice

Open the catalog to page 3

B2 3Pages

Catalog excerpts

All OTTO catalogs and technical brochures

B2
3Pages