Original Documentation Automotive lift date: 10/2003 Manual date: 01.01.2010 Otto Nußbaum GmbH & Co.KG//Korker Straße 24//D-77694 Kehl-Bodersweier Tel: +49(0)7853/8990 Fax: +49 (0)7853/8787/ E-mail: [email protected]//http://www.nussbaum-lifts.de

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST Foreword Nussbaum-Lifts are a result of long-standing experiences. The high quality and the superior concept guarantee them reliability, a long lift time and the economic business. To avoid unnecessary damages and dangers, read the operating instruction attentive and observe the contents. Another or the described purpose going out use is not valid when not as agreed. This is valid particularly for climb and go. The Otto Nußbaum Company is not liable for damages arising from this. The user carries the risk a lonely. For the use belonged:...

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST Organising requirements The instructions for use are constantly to be kept at the place of operation being at hand at any time. In addition to the instructions for use rules pertaining to other regulations i.e. accident prevention and environmental rules are to be observed and directed. Safety- and danger alert operation of personal is occasionally and by observing the instructions for use to be controlled. As far as required and ordered by regulations personal protective equipment is to be used All safety- and danger-hints at the...

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST Filling out and undersigned and copying this sheet and send the original to the lift manufacturer. The copy remains in the manual. Otto Nussbaum GmbH & Co. KG Korker Straße 24 D-77694 Kehl-Bodersweier Record of installation The automotive lift with the The initial safety check was carried out and the lift was started. The installation was carried out by the operating authority/competent (please delete as applicable). The initial safety check was carried out by a competent person before the initial operation. The operating authority...

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST Record of handing over The automotive lift with the the safety was checked and the lift was started. The persons below were introduced after the installation of the automotive lift. The introduction was carried out from an erector of the lift-manufacturer or from a franchised dealer (competent person).

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST 1.General Information The document “Operating Instructions and Documentation” contains important information about installation, operation and maintenance of the automotive lift. • Conformation of installation of the automotive lift is recorded on the ”Record of Installation” form and must be signed and returned to the manufacturer. • Conformation of once of, regular and out of the ordinary service checks is recorded in the respective check forms. The forms are used to document the checks. They should not be removed from the manual....

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST 2.Master document of the automotive lift 2.1 Lift–manufacturer Otto Nußbaum GmbH & Co. KG Korker Straße 24 D-77694 Kehl-Bodersweier Germany 2.2 Application The automotive lift 4.80 H SST until 4.300 H SST is a lifting mechanism for lifting motor vehicles with a laden weight of up to 8000 kg – 30.000 kg. The max. load distribution 2:1 in or against drive-on direction. The automotive lift is only designed for service at the vehicles. It is not allowed to carry persons with the lift. It’s not allowed to install the standard-automotive...

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST 2.5 Declaration of conformity

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST 3. Technical Information 3.1 Technical ratings Capacity: Lifting time Lowering time Line Volthage Control voltage Power rating Motor speed Pump capacity Hydraulic pressure Pressure relief valve Pressure relief valve (safety device) Oil tank *after implementation 8000 kg until 30.000 kg approx. 100 sec. with load (*) approx. 55 sec. with load 3 x 400 Volt , 50Hz 24 V 1,5 kW 1400 rotation/min 3 cm3 approx. 220 bar with load approx. 250 bar with load max. 35 bar approx. 17 L per hydraulic unit Connection by customer (standard) 3~/N+PE,...

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST CE-STOP (main lift and wheel free lift) • - The automotive lift stops automatically approx. 320 mm before the lowest position. Check the dangerous places of the lift and be sure that there are no objects or people in the immediate area of the lift or on the lift. An acoustic signal is heard until the lift is in the lowest position The Computer-control-system recognizes the top-height position of the lift and switch off.

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST 3.3 Data sheet

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST 3.4 Foundation diagram drawing Bei Erstellung des Fundamentes ist die unbedingt die Schienenlänge zu prüfen. Check the length before construction the foundation. - 18 -

Operating Instruction and Documentation 4.80 H SST- 4.300 H SST 4. Safety regulations If you use the automotive lift, the German following regulations are to be considered: BGG945: Examine of automotive-lifts; BGR500 Using automotive-lifts; (VBG14). Especially the following regulations are very important: • • • • • • • • • • • • • The maximum laden weight of the lifted vehicle must not exceed. See the detail of type plate at the operating column. Observe always the detailed operating instruction and the valid legal guidelines. The automotive lift must be in its lowest position (fully collapsed),...